Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Need my Arbortech mini grinder repaired

Posts

Need my Arbortech mini grinder repaired

#1

Need my Arbortech mini grinder repaired

Donna Banfield

Good Morning All

My Arbortech mini grinder died last week. Blowing the vents and switch out with compressed air has not worked. My husband took a look at it, but admitted that I should probably have it serviced by an authorized service tech.

I know that I could send it back to Australia for service, but I would really like to find someone on this side of the world who can repair/service. I'm guessing that the cost of shipping to/repair/return would be close to the cost of a new one.

Google search has turned up nothing so far. Suggestions?

Re: Need my Arbortech mini grinder repaired

#2

Richard Allen

right angle grinder

Richard Allen

They used to sell the mini grinder as an attachment which you would attach to your right angle grinder. You can attach the the business head of the device to a right angle grinder to get you back in business. Then find someone who does power tool repair to clean an lube the non-working "grinder".

Re: Need my Arbortech mini grinder repaired

#3

Re: right angle grinder

Don Evans

The instructions on doing this are on their web site. Look under "Support" on main page.

Pay close attention to the part on alignment and getting it tight on grinder with spacers.

Also, look under "Find a Dealer" on main page.

Don

Re: Need my Arbortech mini grinder repaired

#4

Re: right angle grinder

Donna Banfield

Thanks, Richard. I would do that if I had to complete a job under a deadline, but I was almost near the end of the piece when it quit and was able to finish the little bit left with a die grinder and Extreme Kutzall burrs.

But I chose the entire Arbortech unit specifically because the body of the angle grinder was slimmer than any other angle grinder that I picked up. I have small hands, and could barely hold onto the other units. Next to a chainsaw, and angle grinder is one of the most dangerous tools that I use, and if it ever slipped out of my grip, I could do some serious bodily injury.

Re: Need my Arbortech mini grinder repaired

#5

Re: right angle grinder

Donna Banfield

Thanks Don. I'll check that out!

Re: Need my Arbortech mini grinder repaired

#6

Re: right angle grinder

John Lucas

Donna My arbotec mini came with a standard Makita angle grinder. It would be very easy to change that out. Sounds like you have something different. I also have small hands. Well short hands. I have trouble finding gloves to fit because my hands are wide.

Re: Need my Arbortech mini grinder repaired

#7

Re: Need my Arbortech mini grinder repaired

Chuck Engstrom

Hi Donna -- The Aussie website lists contact for the US office as right down the road from you in Massachusetts:

http://www.arbortech.com.au/view/contact-us-aboutus/

80 Erdman Way, Suite 200, Leominster, MA 04153

Telephone : (978) 466-7869

Toll Free: (866) 517-7869 Toll Free

e-mail: csr@arbortechusa.com

Good luck with it --

Chuck

Re: Need my Arbortech mini grinder repaired

#8

Re: Need my Arbortech mini grinder repaired

Donna Banfield

Chuck, you are awesome! Thank you!!

Re: Need my Arbortech mini grinder repaired

#9

Re: right angle grinder

Donna Banfield

Hi John

We already have a Makita angle grinder, and the body is much thicker/wider when compared to the Arbortech black one that is sold with that long 'nose piece' as a complete unit.

I understand about not being able to find gloves that fit. A lot of the tools/equipment/gloves are manufactured for guys, so it's not easy to find stuff that fit a small hand. When I go to Lowes or Home Depot, and am lucky enough to find good leather gloves in XS, I buy all they have (happens less than once a year). The leather gloves made for women are....flimsy. I bought a pair once, and they didn't last through the first project I was working on :-(

Re: Need my Arbortech mini grinder repaired

#10

Re: right angle grinder

Carol Reed, Strawberry, AZ

Donna, I found a place in California that sells what they call driver's gloves. Presumably they are for truck drivers. The small fits my hands fairly well, not perfect, but much better than most. Every time I visit there, I go get a few pair. There are now 3 new pair in the shop. And we won't talk about what good leather gloves cost!