An unsolicited and non-commercial message...
GaryG in MD
When I heard Keith Tompkins describe the new tool he was developing, the "V Skew", on WC some time ago, I was skeptical. Why should it be better or different from what we're already using? Wishful thinking? No. Not from Keith. He's a level-headed guy, and I trust his judgement...
So I get to St. Paul, and there's Keith demonstrating his new tool. Man, it really works. Very slick. Looks easy. I buy one and bring it home. Got to try it for the first time yesterday. I did the right thing when I bought it. This is one sweet tool.
My relationship with skews is jittery at best -- I use them when I have to, but never with real comfort -- I know the theory and have seen plenty of demos and videos, but I still get too many unexpected spirals that I'm not even sure why they happened after the fact.
This tool is bulletproof. It will do pretty much anything you need a skew for, but I had to really push the envelope to get it to misbehave. I can use this tool and relax and still get results. Facing off end grain with either a skew or spindle gouge can be a little iffy -- the starting cut for the latter, and along the way with the former. This tool gets off to a firm and decisive start on either side of the edge and just keeps on trucking to the center. And it'll do all the other cuts too.
I'm just saying... one happy user.
And it comes in two sizes...
...Gary

With the skew, you are dealing with three planes...the lower bevel, the upper bevel, and the tool itself. On a single bevel skew, only two, the tool shaft and the bevel. The geometry, or approach angle, is not the same. My v-skew behaves exactly like a gouge to user inputs, but cuts like a skew. No spiral cuts if the user comes off the bevel. You'll have to try one!


