Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

A different kind of face shield. *LINK*

Posts

A different kind of face shield. *LINK*

#1

Leo Cuellar

A different kind of face shield. *LINK*

Leo Cuellar

Some of you who do smaller work and those who spend a lot of time at the grinder may find this face shield of interest. I bought one for use at work and am finding it very useful. It is the first one I've ever used that doesn't immediately fog up. I bought the X1-VC. It has vent holes at the mouth area, and while after more than an hours continuous use it did collect moisture around the vents, my vision remained unimpeded. There was plenty of room to wear either regular or safety glasses behind the shield. The ear hangers while rather thick still allowed a good enough fit of my ear muffs (Ryobi electronic) to provide adequate protection while running an electric angle grinder on steel. I haven't tried it out while turning yet as my shop is undergoing a much needed cleaning.

I have no financial connection to this company, just thought some of you might be interested.

Cheers!

Leo


Raygear

Re: A different kind of face shield. *LINK*

#2

Re: A different kind of face shield.

Joe Herrmann

Interesting. Report back in a couple of months after you've used it awhile to let us know how it's working out. Looks like it might be a good substitute.

Joe

Re: A different kind of face shield. *LINK*

#3

Mike Mills

Re: A different kind of face shield.

Mike Mills

That looks really interesting, especially for my daughter and g-daughter who also turn occasionally. One of the most important points is that little + sign after the ANSI Z87. It changes the level of protection dramatically, most shields sold in wood working stores or the big boxes do not have it. Keep us informed of your opinion as you use it more and thanks for posting the link.

Re: A different kind of face shield. *LINK*

#4

Re: A different kind of face shield.

woodspinner-Harry Robinette

It does look interesting,I'm wondering if something hits it will it just push up into and against you face.

Let us know how it works for you.

Re: A different kind of face shield. *LINK*

#5

Leo Cuellar

Re: A different kind of face shield.

Leo Cuellar

Hi Harry, a very good point, which is why I suggested that it would be something that people who do small scale work might want to consider. Such as John's micro-goblets :D . It is unfortunate that there are so few alternatives to even a minimal level of protection. While a motorcycle helmet would protect your face from a large piece of wood, it could still end up breaking your neck... I have however been looking for one at garage sales, I have a nice little squirrel cage fan & want to make a cheap air supplied unit.

Perhaps a steel frame similar to a tall hand truck. With the wheels removed/retractable and an overlarge platform that one stands on to stabilize it and a sheet of plexi up near the face. Attaching a rail near the floor on the lathe would help keep it from flipping back... something that some of the other highly inventive folks here might want to consider...

Still, as discussed in a great many threads lately, forewarned is forearmed.

Safe spinning,

Leo

Re: A different kind of face shield. *LINK*

#6

Another option with ANSI Z87+ protection *LINK*

David Walser

I'm not trying to steal the thread, I'm just responding to the comment about the difficulty in finding ANSI Z87+ rated face shields at the big box and local hardware stores. I recently bought two of Craft Supplies USA's "Apprentice" face shields. At $9.99 each (plus shipping), this is the least expensive of the three face shields CSUSA carries. I bought them to have something on hand when teaching kids to turn. I was pleasantly surprised with their ANSI Z87+ rating and by the relatively high quality of face shields -- their quality easily matches the much more expensive big box face shield I bought for my own use about five years ago. When "my" face shield needs replacing, I think I'll replace it with one of these.

I've no interest in the company, etc.


CSUSA's Apprentice Face Shield

Re: A different kind of face shield. *LINK*

#7

Leo Cuellar

Re: Another option with ANSI Z87+ protection

Leo Cuellar

No problem, David. I think that the more alternatives we can find for each other the better off we are! I have one just like it in red, but I think I paid a buck or two more for it. :( My personal problem with that style of face shield is that I will fog it up in about a minute no matter what the atmospheric conditions are.

I'm also considering the Uvex Bionic Anti-fog face shield as a contender for what I might end up wearing for ppe while turning. Several people here seem to like them.

I saw a youTube video of a kid who made a face shield out of a large clear soda bottle & duct tape, bet that doesn't get an ANSI rating!

Re: A different kind of face shield. *LINK*

#8

Keith Tompkins

Re: A different kind of face shield.

Keith Tompkins

I'm with you, Leo. Don't worry.....something's already in the works. The patent has been applied for, and it's been discussed with a major lathe manufacturer. :D