Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Three new ones....

Posts

Three new ones....

#1

Mike Stafford

Three new ones....

Mike Stafford

I have turned these three boxes in my unstructured free time before and after work. :b .... also before and after heat. :b

The first is my first box in persimmon. This wood was very hard and very old. I can see why it was used for the wooden heads on golf clubs. 2 1/2" tall and 3 1/2" in diameter.

The second box is turned from some blue gum eucalyptus. This is a wonderful wood to turn and finish. 2" tall and 3 3/8" in diameter.

And lastly is a box turned from verawood. This is the typical green cast of verawood which is very hard and dense. 2" tall and 2 3/4" in diameter.

All comments appreciated.....

Re: Three new ones....

#2

Very nice!

David Walser

Mike,

These are very nice. I can't tell from the photos. Is the bead part of the lid or the body of the box?

Re: Three new ones....

#3

Mike Stafford

Re: Very nice!

Mike Stafford

Thanks David. In all three instances the bead is part of the body of the box.

I do make boxes with the bead the other way around in reverse.... :b

Re: Three new ones....

#4

Steven Antonucci

The third one is my favorite

steven antonucci

Not sure why, but it stands out from the other two...

S

Re: Three new ones....

#5

Mike Stafford

Possibly because of dark chatoyance...

Mike Stafford

Who is related to Dark Helmet.......of Spaceballs fame.

You may not be old enough to remember Spaceballs but my son loved it and we watched it many, many times. ;)

Re: Three new ones....

#6

Steven Antonucci

Not only remember it, but saw it in theaters!

steven antonucci

Rick Moranis as Dark Helmet...

Classic

S

Re: Three new ones....

#7

Very Nicely done once again....

jake Niedling

I really like the color in the grain, are all of these end grain boxes? Also, what is your method or tool for shaping the ogee shaped top? I have tried this a few times and seem to get some streaking which show up after sanding. I assume it is coming from the heel of my gouge. Appreciate knowing your basic approach to this lid shape.

Enjoy seeing your boxes.

Jake

Re: Three new ones....

#8

Mike Stafford

Re: Very Nicely done once again....

Mike Stafford

Jake, thank you. They are all end grain work.

Yes, if you follow the adage "ride the bevel" you will almost certainly end up with some burnished areas that are very difficult to remove because the end grain fibers are compressed. Two things I learned is to "glide on the bevel" by not pressing hard against the wood. If the end of the tool is really hot after you cut you are probably pushing too hard. The other thing is to relieve the bevel so that the heel is not as pronounced. Make sure your tool is really sharp so that it stays in the cut with minimal pressure. If you have to force it at all the tool is dull.

Oh, there is one other possibility. If the bevel is longer I have found that the bruising is more likely to occur. That is why I have ground my gouges for end grain work at somewhere around 50 degrees, probably a little less than 50 in practice.

Re: Three new ones....

#9

Very nice...I need to get a piece...

Barry Irby

of Verawood. My first granddaughter is named Vera. I see a keepsake coming.

Where does one get verawood?

Those are gorgeous boxes.

Re: Three new ones....

#10

Thanks, Mike!

David Walser

Mike,

Thanks for the reply to my question. I've been to your website (in the past) and I recalled seeing that sometimes you put a bead on the body of the box and other times the bead is on the lid. (And, IIRC, some boxes are not adorned with beads.) I've printed out pictures of several of your boxes to use as inspiration when I'm in the shop. I really appreciate the resource.

One more question, if you'll permit: Why would you put the bead on the body rather than on the lid (and vice versa)?

Re: Three new ones....

#11

Re: Three new ones....

Roger

Mike,

What are the finishes used on these boxes? Beautiful as usual. Thanks.

Roger

Re: Three new ones....

#12

Re: Three new ones....

Paulo Marin

Fantastic lines and beautiful details.

Congratulations Mike... I wish I had the time to go turn with you :)

Re: Three new ones....

#13

Thanks, that is what I suspected....

jake Niedling

Re: Three new ones....

#14

Dick Hines

Re: Three new ones....

Dick Hines

Nice work Mike. You will have to do another book at this rate.

Re: Three new ones....

#15

Mike Stafford

Re: Three new ones....

Mike Stafford

Hi Roger and thanks for the comments.

I am using a thinned brushing lacquer for most of my boxes these days. I thin the lacquer about 50% and apply it with a paper towel and carefully even the coat and wipe off the excess before it dries. Then I steel wool between coats and apply some Renaissance wax.

Re: Three new ones....

#16

Re: Thanks, that is what I suspected....

John Lucas

sharp tools and light bevel pressure. That being said I have been grinding my main bevel shorter and shorter over the last few years. I used to round over the shoulder where my main bevel meets the secondary bevel. With this short main bevel I don't notice the bruising from the rear of the main bevel.

I really only had this problem on bowls especially early on. Charles Alvis told me to round over the back of the bevel. I've been doing that ever since but now that I'm making the main bevel really short I haven't noticed the bruising at all.

Re: Three new ones....

#17

As good as it gets! Beautiful.

Don Orr

Re: Three new ones....

#18

They're all beautiful!

Greg Haugen

My favorites are the first and third, the wood grain and forms are spot on. The curves from the lid and base look to be the same, they flow very nicely. The second box is a beautiful box but the "form" of the lid has a more different flow than the base's curve, but that's a real nitpick. One thing I've found, the boxes that I have made that have been critiqued by turners for different lid portions, etc. have been the boxes that sell first in the galleries and gift shops. Go figure.

Beautiful work Mike.

Re: Three new ones....

#19

Don Leydens

Re: They're all beautiful!

Don Leydens

You sure have a way with clean and flowing lines. Outstanding work as usual.

Re: Three new ones....

#20

Mike Stafford

Re: Thanks, Mike!

Mike Stafford

David, the reason that I put the bead on the body is because the lid will have a convex curve/ half bead at the point where it joins the body.

When I put the bead on the lid it is at the bottom of a concave curve/half cove and sits at the join.

The beads are there to just help disguise the join. Any kind of detail at the join helps to disguise the grain mismatch that inevitably occurs when you part a piece of wood in two and then overlap part of it so the lid can overfit the body.

Boxes without beads are usually that way because I was having trouble turning a bead or the wood wouldn't cooperate or because I didn't think it was needed because it appeared that the grain alignment would cooperate. And there may be another reason as well; some days I am lazy..... ;)