Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Questionnaire for those AAW Symposium Attendees

Posts

Questionnaire for those AAW Symposium Attendees

#1

Questionnaire for those AAW Symposium Attendees

Greg Haugen

Just getting back from the Symposium I was wondering what others thought about it. So here's a questionnaire for those who attended it.

1. Did you have a "this is unbelieveable" or a "Wow, this is great" moment, if so what was it?

2. List one or two people that you were pleased to have the opportunity to meet?

3. What was your favorite demonstration or panel discussion?

4. What was your favorite thing ( or two, or more) that you bought at the trade show?

5. Did you have a missed opportunity that you'd like to correct next time?

Re: Questionnaire for those AAW Symposium Attendees

#2

My answers...

Greg Haugen

1. Did you have a "this is unbelieveable" or a "Wow, this is great" moment, if so what was it?

Attending Chris Stott's Inlaid Box demonstration. Also at Ruth's Co-Op booth he had approximately 20 of the actual boxes that were used in his book of 50 Boxes for sale. That was really a privilege to see those. Chris was very entertaining and his skill is something to be admired.

2. List a couple of people that you were pleased to have the opportunity to meet?

Boy, there's a lot but Nick Cook, Keith Tompkins, Glenn Lucas, and Ellis are at the top for me.

3. What was your favorite demonstration or panel discussion?

I really enjoyed the architectural turning panel as well as Nick Cook's demonstrations.

4. What was your favorite thing ( or two, or more) that you bought at the trade show?

Another Thompson Skew and a set of Maxi-Cut forstner bits were my favorite purchases.

I was also very impressed with Keith's "V" Skew demonstration. That's a very nice tool that's very versatile.

5. Did you have a missed opportunity that you'd like to correct next time?

I saw Betty Scarpino a few times throughout the weekend and never got a chance to introduce myself. Either she was busy when I saw her or I was caught up with something. Next time. :-)

Re: Questionnaire for those AAW Symposium Attendees

#3

Re: Questionnaire for those AAW Symposium Attendee

Ian

1. Did you have a "this is unbelieveable" or a "Wow, this is great" moment, if so what was it?

no wow moment, was even a little disapointed in some of the demos.

2. List one or two people that you were pleased to have the opportunity to meet?

new people, Ray key, Brian McEvoy, reconnected with old aquaitances to many to name or remember.

3. What was your favorite demonstration or panel discussion?

Trent Bosch and steve worcester

4. What was your favorite thing ( or two, or more) that you bought at the trade show?

round ripper from stockroomsupply ( www.stockroomsupply.com) finally a blank cutter that works.

5. Did you have a missed opportunity that you'd like to correct next time?

bring more batteries for the camera, ran out at the worst time.

IAN

Re: Questionnaire for those AAW Symposium Attendees

#4

Re: Questionnaire for those AAW Symposium Attendee

Mark Wollschlager

1. The instant gallery, Roots, and AAW 25th gallery supply enough wow fro a year ( at least ) of inspiration.

2.Aside from reconnecting with folks I see one week a year ( more every year ).

And the WoodCentral Lunch,

Jon Magill and I had a nice lunch conversation. Vinnie Lucinni who my wife and I had a nice conversation with at the banquet.

3.Todd Hoyer Turning Crotches was pretty good. And the Instant Gallery critique gives food for thought.

4.Doug Thompsons traveling tool set.

Stuart Batty's extravaganza was a bit of a head scratcher. I guess I didn't stand around enough for it to sink in.

Ruth Niles booth/cooperative gallery was a real treat ( and some real deals )

5. I wish I had more time to connect with more people.

mark

Re: Questionnaire for those AAW Symposium Attendees

#5

Re: My responses (long)

Donna Banfield

1. The Instant Gallery, Roots Exhibit/Auction, EOG Auction, Chapter Collaboration and 25th Anniversary Exhibit. Together they all raise the bar for me -- which is a good thing.

2.I made a point of meeting/introducing myself to as many of the people whose work I admired, names I recognized from all the turning forums, or FB. I'm math-impaired so can't count that high to tell you how many. Have no favorites - I was thrilled to meet everyone.

3. I jumped around quite a bit trying to make the most of the rotations, but two demos I really enjoyed were David Nittman and Jim Sannerud. I never saw David before, and found his demo very interesting. He has a dynamic personality, is funny and energetic, and gave an honest answer when you asked a question (i.e, wasn't playing the politically correct game). I liked Jim's demo (Scandinavian shrink boxes) because I'm drawn to the Scandinavian and Norwegian carving techniques. Jim studied these techniques from the very masters, but also found ways to use the lathe to accomplish (i.e., speed up) some of the steps.

4. Doug Thompsons' steel always holds a 'favored status' place in my tool rack. As my readily 'commercially available' tools wear down, I replace them with Doug's. I ordered the 1 1/4" spindle roughing gouge, shipping out when he get's home. I also ordered the Kelton carving jig and accessories to replace the smaller version that was almost 10 years old and cumbersome to use. It was the very first one that Best Woods Tools made, and at that time the only jig on the market. The handles to operate the articulating functions were not offset from the post that held the chuck. Consequently, the handles were always getting in each other's way. The handles also needed to be longer, because the torque that was created once a large piece was mounted and dropped down 45 degrees (to allow carving) made those handles impossible to budge without a long piece of pipe placed over them to provide some additional leverage.

5. Not having a chance to meet EVERYONE who was there, but that's simply impossible. And there's always the next one..... :-)

Re: Questionnaire for those AAW Symposium Attendees

#6

Betty Scarpino

Re: Questionnaire for those AAW Symposium Attendee

Betty Scarpino

Just getting back from the Symposium I was wondering what others thought about it. So here's a questionnaire for those who attended it.

1. Did you have a "this is unbelieveable" or a "Wow, this is great" moment, if so what was it?

Seeing Jerry Bennett's large sculpture in the I.G. Also, the local chapter collaborative entries were really great this year.

2. List one or two people that you were pleased to have the opportunity to meet?

Must have been a dozen or more turners who I met for the first time, folks who post on WC or WoW, but I had not meet before. Met them mostly in passing in the hallways, on their way to the next rotation.

3. What was your favorite demonstration or panel discussion?

I think sitting in on part of Claude Lethiecq's presentation and hearing the history of tour de force turning and how he's developed his incredible objects.



4. What was your favorite thing ( or two, or more) that you bought at the trade show?

A new dust mask. I already have two faceshields and wear them!

5. Did you have a missed opportunity that you'd like to correct next time?

I only fully made it through the IG once. Next time I want to spend more time there. Also, next time I AM going to recognize Ellis immediately instead of having to take a look at his name tag first!



Congratulations to Clay Foster for having his sculpture win the purchase award, presented by the Professional Outreach Program (POP) committee! Maybe Clay will post a photo of it ... it's going to the AAW's permanent collection.

Re: Questionnaire for those AAW Symposium Attendees

#7

George Taylor

Re: Questionnaire for those AAW Symposium Attendee

George Taylor

This is my first AAW Symposium although I have been to SWAT several times as well as trade shows from work (Wireless Symposiums aka CTIA)

1. Did you have a "this is unbelieveable" or a "Wow, this is great" moment, if so what was it?

I thought hard about this and what impressed me the most was the dedication and enthusiasm in the Youth program. Bonnie and the hordes of volunteers made a difference in many young peoples' lives. The joy and pride in their eyes was touching as well as the gleam when they proudly announced that they were getting to go home with one of the 25 lathes that were donated.

2. List one or two people that you were pleased to have the opportunity to meet?

Ellis --- no brainer

3. What was your favorite demonstration or panel discussion?

I like to figure out the "how" of "how did he do it?" I enjoyed Jerome Blanc's demo on inlaid acrylic.

4. What was your favorite thing ( or two, or more) that you bought at the trade show?

I didn't want to check baggage so I am saving my tool buying for SWAT; I bought miniatures by Molly & Ray Key at Ruth's booth and Andi Wolfe's earrings for the missus from Ruth's booth. I also bought a couple chunks of dyed burls (red & green) that I will cut up this week for my wine stopper production run for the holidays (Up North Burls).

5. Did you have a missed opportunity that you'd like to correct next time?

Meet more WoodCentral folks and more Youth Workshop. Thanks for organizing the lunch Ellis!

Re: Questionnaire for those AAW Symposium Attendees

#8

Keith Tompkins

Re: My answers...

keith tompkins

:) HI Greg...Hey, it was my pleasure to meet you! It was easy to see you had a good time!

Re: Questionnaire for those AAW Symposium Attendees

#9

I, too, was very impressed...

GaryG in MD

...with Keith's "V skew" and bought one. It appears to be very versatile and effective. ...Gary

Re: Questionnaire for those AAW Symposium Attendees

#10

Keith Tompkins

Re: Questionnaire for those AAW Symposium Attendee

keith tompkins

Now that I have more time: Bihn's moving tribute to Joan Kelly and Bert Marsh was the tops for me. I didnt' get far from the vendor area, 28 hours spent turning beads, coves, etc. I didn't get to see the instant gallery, which is my favorite thing to do at the symposium. I saw many old friends, and made quite a few more! Talked with Ellis and Mark Baker, and Mark Mandell, had a drink with Eli Avisera after the symposium. Great guy. (a coke for him) Had a great time with Andi Wolfe, who graciously invited me to participate in her design panel discussion, along with Dick Gerard. Gary, It's always good to see you!