Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Woodcraft owners sales meeting

Posts

Woodcraft owners sales meeting

#1

Woodcraft owners sales meeting

john lucas

I just spend a couple of days with Mike Hunter and Mark StLeger doing demos for the Woodcraft annual sales meeting. We had a great time. Fortunately I was able to do a little walking around and found some fun things.

Nova has 2 new lathes. A Comet lathe that is a 12" mini lathe but has a unique hand wheel. You can add quite a few tools to the hand wheel. One was a very well designed sharpening system complete with bowl gouge jig. One was a belt sander, a flex shaft, a disc sander and I think a few more things but i forget. This would be very useful for someone getting into turning who doesn't have any kind of shop.

The other lathe was a 2024. 20" swing, 24" between centers but will take bed extensions. Still has a swiveling head with outboard attachment. The coolest thing was a remote control watch. Yea it fits on your wrist and gives you complete remote control of your lathe.

Grex has one of the smallest and quietest air brush compressors I've ever seen. I didn't ask the price because I would have bought it right there. I'll start saving and then look up the price.

I looked at the new Kutzall files. I will probably get some of those shortly as well. They will fill the niche between their rotary tools and hand carving tools quite nicely.

General tools had a pinless moisture meter that will measure up to 4" deep. That might be useful for you turners that want one of those.

www.demoairnet.com had a very interesting micron type dust collector. It fits over a fan and is washable. It can sit on the floor and will clears huge amounts of airborn dust extremely fast.

That's all I can remember for now.

Re: Woodcraft owners sales meeting

#2

Re: Woodcraft owners sales meeting

Ken Oakley-Sunny St. Cloud, Fla

Maybe I am old fashioned but I would never wear anything below my elbows while turning on a lathe

Re: Woodcraft owners sales meeting

#3

Re: Woodcraft owners sales meeting

john lucas

Ken I'm confused. I don't think I said anything about something below your elbows. I'll be glad to try and answer whatever it is.

Re: Woodcraft owners sales meeting

#4

Re: Woodcraft owners sales meeting

Ken Oakley-Sunny St. Cloud, Fla

You state the lathe has a remote control you wear on your wrist.

Re: Woodcraft owners sales meeting

#5

Re: Woodcraft owners sales meeting

Alan Trout

It also has a magnet on the back so it can be placed anywhere on the lathe. The older DVR's can be retrofitted with the remote without any major difficulty and it is right at $100 for the upgrade. Looking forward to getting mine. I talked with Teknatool today at the symposium.

Alan

Re: Woodcraft owners sales meeting

#6

Steve Kubien

Pricing?

Steve Kubien

Can you tell me the pricing on the 2024 lathe?

Re: Woodcraft owners sales meeting

#7

Re: Woodcraft owners sales meeting

john lucas

OH right, sorry forgot, still tired from standing for 2 days. I think it's a great idea. It would be instantly accessible in most cases. You would simply pull the tool away from the work and hit the big panic button to stop the lathe. It's kind of a large flat dial. It has smaller areas that let you change speed. Heck maybe it would be better mounted on your chest so you could slap it with either hand.

Re: Woodcraft owners sales meeting

#8

Re: Pricing?

john lucas

I didn't check pricing. I usually just stopped briefly by booths on my way to and from the bathroom stops. The prices they had posted on things were usually wholesale or special pricing to the dealers since this wasn't a consumer show.

Re: Woodcraft owners sales meeting

#9

Steve Kubien

Re: Pricing?

Steve Kubien

Of course. Right. That makes sense. Perhaps an update is forthcoming from someone in St. Paul.... I knew they we coming out with a larger swing lathe. I hope it is close to a my budget....

Re: Woodcraft owners sales meeting

#10

Re: Woodcraft owners sales meeting

Ken Oakley-Sunny St. Cloud, Fla

Now that's an idea I could live with. Great minds think alike.

Re: Woodcraft owners sales meeting

#11

Re: Woodcraft owners sales meeting

Alan Trout

$2999 for the 20" lathe but that is stand and remote included.

Re: Woodcraft owners sales meeting

#12

Re: Woodcraft owners sales meeting

Randy Gleckler

Only if it's designed to look like Iron Man's Power core. :-D

Re: Woodcraft owners sales meeting

#13

Re: Woodcraft owners sales meeting

john lucas

Randy I think the rockets would be handy. That way we could fly to symposiums and demos last minute. The carry on luggage fee is probably rough.

Re: Woodcraft owners sales meeting

#14

Re: Woodcraft owners sales meeting

John Peck

You can see pictures of the new Nova 2024 lathe and the new Comet lathe and info about them at page 7 of the Nova catalog available on line at the Teknatool web site.

Re: Woodcraft owners sales meeting

#15

Steve Kubien

Re: Woodcraft owners sales meeting

Steve Kubien

Thanks Alan. Hmmm, guess what just jumped to the top of my realistic list?

Re: Woodcraft owners sales meeting

#16

Steve Kubien

Re: Woodcraft owners sales meeting

Steve Kubien

Thanks John. Heading over there now.

Re: Woodcraft owners sales meeting

#18

Re: Woodcraft owners sales meeting

Stuart Johnson

Instant 300 rpm to 2000 rpm when the neighbor tries out his new high power garage door opener.

Re: Woodcraft owners sales meeting

#19

Actually, probably not

Ralph Lindberg

99% of the Garage door openers operate at 390 Mhz or 315 Mhz, while the Nova remote is at 2.4 Ghz RFI between the two is, well, not likely.

My bet, is that the remote uses a digital data stream to signal changes in the setting, so the most any RFI could do, is prevent the operator from actually current operation of the lathe.

Now the 2.4 Ghz band, is a shared frequency. The primary users are industrial/medical. Usually diathermal heating machines. The secondary users are Hams, in this band we usually do point-to-point communications, including satellite and EME (bouncing a signal off the moon, yes the moon).

The third user is everyone else, which includes (in the US and Canada, among others), WIFI.

Now, that means that a good WIFI sniffing system might be able to monitor the data stream between the remote and the lathe, capture and data and result in a hack. This hack would allow a good geek to build a DVR-remote "program"

emmm....

Re: Woodcraft owners sales meeting

#20

Still - That's funny 

Jeff Willaford

Re: Woodcraft owners sales meeting

#21

Re: Actually, probably not

Don Evans

You forgot one of the most used by niehbors and that is home telephones that have portable handsets...

But surely these things are digital signal riding on that 2.4 carrier cannot image it being anything else so not much to worry about.