Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Wood ID help needed

Posts

Wood ID help needed

#1

Wood ID help needed 

Jeff Willaford

Not the best pictures but the best I could do at the moment. Any help in identifying will be appreciated.


Re: Wood ID help needed

#2

Re: Wood ID help needed

Jorge Casta�eda

Jeff,

it would help to have a picture of the bark and the end grain in sharp focus.

At first glace it could be red oak.

Re: Wood ID help needed

#3

Re: Wood ID help needed

Jeff Willaford

No bark as this came from a very, very dry piece of timber given me by a friend. Very light wood...definitely not any oak I've ever handled though the end grain is very porous. Tiny round 'tubes'. Someone suggested American Chestnut.

I'll try to get a sharper picture of the endgrain.

Re: Wood ID help needed

#4

Re: Wood ID help needed

Don Orr

Could be an Elm. Am. Chestnut is certainly a possibility. Ash can get dark like that over time and have edges that dry out and crack like that too.

Re: Wood ID help needed

#5

Re: Wood ID help needed

Randy Johnson

If by �light� you mean weight and not color, my guess would be Catalpa. I�ve had a lot of it the last few years and it looks just like the wood in the picture. The same goes for the small amount of bark showing. If it is very soft I�d say it is almost certainly Catalpa.

I love turning it. You need a respirator, but the final sanding is soooo much easier than something like walnut.

Re: Wood ID help needed

#6

Jim Evans

Re: Wood ID help needed

Jim Evans

Looks like Catalpa to me also. I'll post a picture when I get back from my great grandson's Birthday party.

Re: Wood ID help needed

#7

Steven Antonucci

Elm was my first guess too.

steven antonucci

If it has a medicinal smell to it, that would be another indicator of elm. I always think bandaids for some reason?

S

Re: Wood ID help needed

#8

Thanks

Jeff Willaford

Does not seem to match any other catalpa on hand nor does it compare to the ash I have. No medicinal smell in fact no smell that I can tell. Seems to turn nicely. Weight wise it's about 1/2 to 2/3rd the weight of a similar sized piece of oak. Too bad I don't have any bark to examine. Thanks for all the input.

Re: Wood ID help needed

#9

Re: Wood ID help needed

don lewonczyk

Looks alot like what the locals here in AL, TN call cottonwood. I can't think of the proper name but is a Japanes ornamental tree that has large grape like purple flowers. I carved a duck and woodburned the details and the pictures of your wood looks exactly like the wood I described.

Re: Wood ID help needed

#10

Ellis Walentine

I guess chestnut

Ellis Walentine

Re: Wood ID help needed

#11

Re: Wood ID help needed

Barry Irby

I think Don is talking about Paulownia or Royal Paulownia. If that is what it is it would be very light, sort of in the category of balsa wood. I have only ever had a couple of small pieces and did not turn it. That the tree with the purple flowers that is highly prized for making the boxes Kimonos are stored in. You hear about peoples Paulownia trees getting cut down and log stolen right out of their yards.

Re: Wood ID help needed

#12

Re: Wood ID help needed

don lewonczyk

Oh, the name of the tree is paulownia, pronouced pau-low-ni-a. It is a very light wood and cut with the grain very strong if the annual growth rings are 7 per inch or more. The tree has a thin bark that comes off easily after the tree has been down for awhile and it doesn't rot easily and it's not good firewood.

Re: Wood ID help needed

#13

Re: I guess chestnut

don lewonczyk

Ellis I didn't see any worm holes in the picture and most chestnut I run across had worm holes but I am no expert on wood ID. and you could be entirely right. DonL

Re: Wood ID help needed

#14

Re: I guess chestnut

Jeff Willaford

There are small worm holes in other parts of the wood but I never thought of them as identifying characteristics. I see lots of wood around here with holes.

Re: Wood ID help needed

#15

Re: I guess chestnut

Carole Valentine

I looked at this wood in person the other day and the tiny worm holes along with other characteristics (including the fact that it had been stored in an old barn for many years) are what made me think it was American Chestnut, but I am certainly no wood expert.