Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

For all the tool lovers going to St Paul

Posts

For all the tool lovers going to St Paul

#1

For all the tool lovers going to St Paul

glenn roberts

Just a heads up to those going to St Paul. For anyone interested in new and unique tools keep an eye out for at least one new tool from Kelton.

Some of the turners here have been testing the new tool over the last few months and it is being released this week. It's worth a look.

Re: For all the tool lovers going to St Paul

#2

Keith Tompkins

Re: For all the tool lovers going to St Paul

keith tompkins

Hi Glenn, Even better...check out the V-Skew in the Packard booth. But then, I may be a bit partial :D

Re: For all the tool lovers going to St Paul

#3

Re: For all the tool lovers going to St Paul

Jeff Willaford

I can only hope there is a new, heavy-duty, highly adjustable shear scraper in the lot.

I recently had the opportunity to see and use such a tool and was very pleased with the results. I had some very dry maple bowls turned low and wide so the bottoms are a little flatter than I usually turn. I was thinking I�d have to title them as a series of �ripples on the pond� but thanks to the mass and adjustability of the scraper the ripples were easily gone. Also, the curve of the cutter seems to be just right for me. It would definitely be a �go-to� tool for me.

Did I mention it makes my current teardrop scraper seem like a light weight toy?

Re: For all the tool lovers going to St Paul

#4

I Agree

Barbara Gill

I have been one of those fortunate turners. The new Kelton scraper is very adjustable, and a joy to use. I have been scraper challenged, finding the traditional tools very difficult to manage. The versatility and heft of the kelton has changed that.

Re: For all the tool lovers going to St Paul

#5

OK y'all, for those of us not attending ....

JamieDonaldson

..St. Paul Symposium, what does this new beast look like? No fair taunting us with vague discriptions!

Re: For all the tool lovers going to St Paul

#6

Ain't Too Late, Jamie

Mark Mandell - Gone Round In Jersey

Day's drive from Kaintuck and you can see it in the flesh. ;)

Re: For all the tool lovers going to St Paul

#7

Re: OK y'all, for those of us not attending ....

steve worcester

This maybe?

http://www.kelton.co.nz/browsers/shear_scraper_10_home.html

We will be selling a Thompson 10V shear scraper that I helped develop with Doug. It is an 1 1/8" wide by 1/2" thick. Granted, does not have that adjustability, mainly designed for convex and flat surfaces, But I would still like a look at Kels tool. He is a good tool maker.

But the AAW Symposium has always been a great place to intro new tools and products, this year will be no exception. I will be sure to post some photos of them on my website.

Re: For all the tool lovers going to St Paul

#8

As long as you don't want a close hotel

steve worcester

Re: For all the tool lovers going to St Paul

#9

That ain't no new tool! I made 1 years.....

JamieDonaldson

....ago out of regular ol' 3/4" cold rolled and found HSS shaper blades on the bargin table 3 for $5!!!

Re: For all the tool lovers going to St Paul

#10

Not Even Close!

Barbara Gill

I will be more specific.

For the first time in my turning career I got to try a new tool before it came on the market. For this tool to be a scraper is interesting since I have always been scraper challenged to the point that I usually avoid using them.

As far as I know this hefty tool is the first scraper that has the option to make many adjustments to allow the very best position for the job at hand. The adjustments include the option of adjusting the head to a negative rake position as well as being able to rotate and secure the head. The shaft has two flat sides as well as a rounded part adding even more versatility.

Kelton is first offering it for sale at the AAW Symposium this weekend.

Re: For all the tool lovers going to St Paul

#11

What Barbara said....

Jeff Willaford

Re: For all the tool lovers going to St Paul

#12

Re: For all the tool lovers going to St Paul

robo hippy

I have yet to see a tear drop/adjustable scraper tool that would do anything that I can't do with standard scrapers. I will have to check it out. I have been having a lot of fun with Doug Thompson's fluteless gouge. Superb for high shear angle cuts across the bottom of the bowl, inside a recess, and even for spindles.

Have to check them all out.

robo hippy

Re: For all the tool lovers going to St Paul

#13

Bill Blasic

Re: OK y'all, for those of us not attending ....

Bill Blasic

Steve,

I don't think those can be the ones as I have a set that looks very much like those and I've had them for years.

Re: For all the tool lovers going to St Paul

#14

Re: OK y'all, for those of us not attending ....

Dale Bright

The tool is on the Kelton site.

Multi-Rake Scraper


Re: For all the tool lovers going to St Paul

#15

new tool

glenn roberts

Dale, I think you are pretty close to the mark. As you can see by the responses, new tools are sometimes progressed by various unpaid 'helpers' in this case some of the turners here.

Re: For all the tool lovers going to St Paul

#16

same here

bob davis