Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Jumbo jaw extensions

Posts

Jumbo jaw extensions

#1

Jumbo jaw extensions

john lucas

This is another adaptor I've been planning to build. I drilled 3/4" steel rod and tapped both ends. One has 6mm threads. I put 6mm bolts through the jumbo jaws and screw this into the steel. I put 5/16" threads on the other end so I can make adaptors as needed to hold those really weird shapes. One adaptor that I plan to make will be some 1 1/2" circles with the hole off center so I can adjust them even further for wierd pieces.

Re: Jumbo jaw extensions

#2

Re: Jumbo jaw extensions

mjonesrdg

Like these! Recommend large flat washers on the back side.