Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Glaser jones� (or how many v's do you really need?

Posts

Glaser jones� (or how many v's do you really need?

#1

Glaser jones� (or how many v's do you really need?

David DeCristoforo

Everyone knows what a "jones" is right? No? OK it's slang for an addiction. I'm here to confess. I have always had a "tendency" to become addicted. Not to drugs or booze or anything like that. More to things like coffee and chocolate. And tools. Yes, I have always been a sucker for fine tools. When I started turning, I cobbled together a collection of tools, most of which, while adequate, could never be called "fine". I do have a 3/8" bowl gouge and a couple of scrapers that are of very good quality.

I recently acquired a 5/8" 10V Glaser bowl gouge. I have been so impressed with this tool that I can hardly put it down. But it is the 10V gouge and I could not stop myself from wondering how much better a 15V tool would be. And the 5/8" gouge is pretty heavy duty for most of the work I do. So I ordered a 1/2" 15V gouge which not only gives me a smaller tool but also some way to compare the 10V and 15V steels. My first impression is that I don't think one cuts "better" than the other but I have been using the 15V to shred wood almost all day and it shows no sign of losing it's edge. The ultimate test will be a chunk of very hard and dry rosewood burl which has sent every tool I currently own to the grinder! The 15V tool also looks awesome with the jet black "stealth" handle and gold cap. OK I know that has nothing to do with how it performs but there are enough people here that are obsessive about how their tools look that I thought it might be worth mentioning.

Also, while I was at it (yes, I told you this was a story more about addiction than tools) I ordered a 3/4" and a 1 1/4" scraper. These things are incredible! The steel is a full 3/8" thick and beautifully seated in the handle. I have only used these lightly so far but they are a joy to use and I am sure they will get many serious workouts.

Now I am hopelessly sucked in. I plan on replacing all of my tools with Glaser tools. It might take some time because these things ain't cheap. I'm already losing sleep because I cannot get the image of the new MiniQR system out of my head. This might even motivate me to go out and clean up my lathe bed! And I know the rule about "no pics, credibility" so here's a few...



Re: Glaser jones� (or how many v's do you really need?

#2

Re: Glaser jones� (or how many v's do you really n

Brian McInturff

Hey David, I own 9. Not new ones. Can I count 12 more when the MiniGlaser gets here? I really do like them and the fit and finish is superb on them too. They are expensive but so are Snap-on and Klein tools. I try and by the best tools I can afford. Does that make me the best turner? Not by a longshot, but I'm happy and can't complain when I turn. And I can't blame it on inferior tools either. I think I have that same addiction you were talking about...

Re: Glaser jones� (or how many v's do you really need?

#3

OK David, chocolate and coffee are ......

JamieDonaldson

...essential staples on the health food list, but you certainly are showing symptoms of a variety of afflictions with this gloat! Obsessive/compulsive behavior, hyper normal addiction for rare metals, manic-depressive hoarding, etc. :D :D :D

Re: Glaser jones� (or how many v's do you really need?

#4

Steven Antonucci

Scharffenberger I get...

steven antonucci

And a good cup of coffee is a no brainer.

But you would kill me the first time I drove a spur center with one of those handles.

Can a tool be too pretty to use? If you have to detail it after turning, maybe yes...

S

Re: Glaser jones� (or how many v's do you really need?

#5

Re: Scharffenberger I get...

David DeCristoforo

Naaa. It's like a new car. After you get the first scratch, you quit worrying so much about it...

Re: Glaser jones� (or how many v's do you really need?

#6

Alan Zenreich

Re: Scharffenberger I get...

Alan Zenreich

David,

Now there's a good metric for the new chisels.

How many cars can you scratch with each type of steel before you need to sharpen them? < vbg >

Re: Glaser jones� (or how many v's do you really need?

#7

Steven Antonucci

My FIL and new trucks

steven antonucci

My FIL was a truck guy. He would no sooner sign the papers and then jump up in the bed with steel toed boots and kick the first dent. His logic was that the sooner he did that, the sooner he would stop worrying about getting that first ding.

I do take care of my tools, but I do not obsess over them. After a million miles together, they are old friends. May your new tools serve you well over the next million miles.

S