Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Mini sorby set *LINK*

Posts

Mini sorby set *LINK*

#1

Mini sorby set *LINK*

John Lucas

Thought I would start a new thread. the other one was getting long and a bit testy. We can discuss all of the mini tools. Sorby actually sells quite a few versions. Here is another set that I have actually played with and they are excellent tools.

http://www.woodcraft.com/Product/2021212/26048/Sorby-Micro-Spindle-Set.aspx

I would post photos of my mini set but I'm at work and can't run out to the shop and make a photo. However I will be shooting bottles of wine after lunch so if you want a photo of that I'll be glad to oblige. Probably can't drink it though, we are a state University and alcohol is a no no.


http://www.sears.com/shc/s/p_10153_12605_00901487000P?sid=IDx20070921x00003a&ci_src=14110944&ci_sku=00901487000P

Re: Mini sorby set *LINK*

#2

rockler set *LINK*

John Lucas

Of course one of the originators of small tools was Bonnie Klein. I have one of her 3/32 spindle gouges. It's a good tool but a little too long. the blade that is, not the overall tool. This is one tool where I think you should be able to adjust the length the tool protrudes from the handle.

http://www.packardwoodworks.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=packard&Category_Code=tools-tayl-klei


http://www.rockler.com/product.cfm?page=21450

Re: Mini sorby set *LINK*

#3

Jet set *LINK*

John Lucas

OK my photos from the last job just finished downloading so now I really do have to get back to my real job. I'll check in later.


http://www.amazon.com/709163-Mini-Lathe-Turning-5-Piece/dp/B00004T9M7

Re: Mini sorby set *LINK*

#4

Nano Revolution Set *LINK*

George Guadiane

Gotta start by saying I have no financial interest in the tools and I haven't paid for any of the tools I have been working (but I WILL when the time comes).

I'm an early beta tester:

For small stuff and for detail work on even large stuff, I have found them to be pretty much invaluable. I made a little sub rack on my tool rack and mounted it high and close because I use it so much.

I have to say, they selected quality materials, all the way through and, even pushing the limits, I've had few issues in getting what I wanted from them.

Full disclosure, Steve Sherman (one of the team who came up with the concept) is a friend of mine and I have spent a little time watching him use the tools in person. He has great tool skills and a thorough understanding of the tools and how to get the most out of them.

I have also watched Steve's video numerous times and find THAT to be very helpful in getting them to work for me.

So, While I haven't tried any of the other mini tools, I have to assume that they are useful for almost anyone who wants to use them.


Nano Revolution

Re: Mini sorby set *LINK*

#5

Thompson Mini set

Doug Thompson near Cleveland

I have a bunch of shorts made I'll bring out, Can't say to much and spoil the surprise(s)

Re: Mini sorby set *LINK*

#6

we look forward to surprises

John Lucas

Re: Mini sorby set *LINK*

#7

Re: Thompson Mini set

George Guadiane

I have two of your 1/4 inch gouges. Got them specifically to use with the Nano tools. Now, If I could just get the handles turned...

Re: Mini sorby set *LINK*

#8

Re: Mini tool set

bernie feinerman

These tools from Gladstone tools work fine. Changing tools is easier than with the Nano tools.

www.gladstonetools.com/gl5pmospset.html

Re: Mini sorby set *LINK*

#9

Important  with ALL minis

BillTurpin in WNC mountains

Important with all minis. No matter whether they are cheap or the best quality, KEEP THEM SHARP! With the smaller steel, chatter/vibration is even more prevalent. Sharp will produse better results. They will dull that much quicker. Have fun.

Re: Mini sorby set *LINK*

#10

Re: Thompson Mini set

Doug Thompson near Cleveland

After the symposium I'll order a extrusion for some mini tool handles.

To all; If you have ideas about mini tools contact me by email or at the symposium.

Re: Mini sorby set *LINK*

#11

Re: Mini tool set

John Lucas

they both look like they use 2 set screws. Am I reading that wrong?

Re: Mini sorby set *LINK*

#13

Steven Antonucci

1.5" flutes...

steven antonucci

Re: Mini sorby set *LINK*

#14

Mini versus Micro

Ed Moore in SW VA

Hi John,

I think that some folks lost sight of the fact that the MiniGlaser tools that I have been speaking of are 14" in length overall. Some of the tools mentioned in this thread are shorter than that and some should possibly be considered MICRO tools instead of MINI tools.

Hope the demo is fun,

Ed

Re: Mini sorby set *LINK*

#15

Re: Mini versus Micro

john lucas

Well I thought the Nano tools were misnamed. These are my big goblet tools. I don't think I took a photo of the really small ones yet. One is my skew and one is the spindle gouge.


Re: Mini sorby set *LINK*

#16

Re: Mini tool set

George Guadiane

If I understand the question, the Nano clamps like a drill chuck.

Re: Mini sorby set *LINK*

#17

Re: Mini versus Micro

George Guadiane

That's just not funny!

You should have to magnify those images so that we can actually SEE the cutting edges.

But you'r right, by comparison, the Nanos look gigantic.

Re: Mini sorby set *LINK*

#18

Alan Zenreich

Re: Mini tool set

Alan Zenreich

George, to refine you statement, I'd say the Nano mounts like a collet chuck.