Safety Reminder
George Van Beynen
Two days ago as I was felling trees it was 85 degrees and I was not going to put on my chaps which surely add to the heat factor. I finally decided I would put the hot things on as I always do. After notching the first tree I felt a tug on my left leg, the saw teeth were full of Kevlar and there was a cut in the chaps by my knee. It is hard to say how much damage I would have had if I did not put the chaps on. I have had a lot of people say the chaps cost too much for the occasional times they use their saw; I tell them that occasional use and unfamiliarity with the saw is exactly why they should use them!
My chaps are 21 years old (with 21 years of old oil and dirt), and not a nick until now. Experience and professional training does not remove the necessity for safety equipment.
I had adjusted the carburetor on the 262 Husky the evening before; the saw would not idle very long before quitting. Whatever was wrong in the carburetor changed and the saw chain did not stop at idle and was still racing when I reached down to remove the wedge. The chain hit my knee.
In training I was told that the left leg is the limb that gets the most cuts, guess I am a believer!




