Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Older miniGlaser

Posts

Older miniGlaser

#1

Older miniGlaser

Ed Moore in SW VA

When Glaser Hitec came back into the picture and offered the "English" bedan I was absolutely delighted and purchased one. Then, I have slowly acquired most of the older red miniGlaser tools. The new Quick Release tools look stunning and except for the handle arrangement are the same tools as the older red ones.

Recently it was suggested to a friend that I am now working for Glaser Hitec. While I was having chemotherapy and the hair was totally gone that was possible, but now that the hair has returned that won't work. (Paulo would be jealous) The hair is twice as long now as shown in the picture.


On Thursday evening I am to do a demo on ornaments for the Smith Mountain Lake Woodturners, my home club, and I am hoping to do the demo using only miniGlaser tools. Hopefully my round-nosed scraper will arrive in time and I won't need the older Sorby.

I am so impressed with the miniGlaser tools that I am considering doing a tool review in the near future with pictures and posting it on WoodCentral. The SRG and the 3/8" spindle gouge will both take and hold an excellent edge. I like using good tools with sharp edges and the miniGlasers really do the job. These two tools are now on my "go to" list for ornaments. I feel comfortable praising the miniGlasers because other manufacturers do not carry a mini line, so no conflicts should arise.

I need my daughter-in-law to take the photos for me because I am no longer quick enough to hold the tool AND take the picture.


Ed

Re: Older miniGlaser

#2

Re: Older miniGlaser

brian.mcinturff

Ed,

Are you talking about the old miniature Glasers? I have a small !/4" Glaser Detail gouge that I use all the time. I think it's around 10"long including the handle. After conversing with Paulo I believe the new MiniGlaser will be around 14" in total length. 7" handle and approximately 7" tooling. I really do like the old Glaser tools. I have an old Bob Stocksdale spindle gouge I use all the time too and it probably was a Glaser. I didn't realize that until reading the Glaser website. Not to hijack your posting but do you know who actually manufactured the AAW Anniversary gouges with the Glaser name?

Re: Older miniGlaser

#3

Mike Stafford

Re: Older miniGlaser

Mike Stafford

Wow!!! If you'll dye that mop you'll look like Elvis! :b

I would love to be able to see your demo Ed. I enjoy seeing you do ornaments and watching you play with your new toys. Have fun!

I am glad you are feeling better.

Re: Older miniGlaser

#4

Re: Older miniGlaser

Ed Moore in SW VA

Brian,

Paulo Marin purchased the Glaser line in 2005. The 1/4" gouge you have was probably one from Jerry Glaser before that time. At the 2006 Louisville Symposium Paulo introduced the new tools, including a nice set of miniGlasers that were in a nice case. I have an older 1/4" detail gouge like yours and it is quite different from the 3/8" spindle gouge which really works for me on ornaments. I think that the handles on my red miniGlasers are 7" long and the tool lengths are about the same.

Paulo produced the 1000 commemorative 20th Anniversary 3/8" and 1/2" serialized bowl gouges. They were beautiful. In retrospect, I wish that I had gotten one. But should one use such a tool?

I believe that there will be handles of various lengths for the new miniGlaser QR set. It is my wager that almost everyone who purchases the set will purchase a longer second handle. I know that I would. If folks like the new miniGlaser Quick Release tools as much as I like my red ones, then Paulo is going to be VERY BUSY! He is a great guy and I wish him every success.

It is my feeling that the new tools from Glaser Hitec are going to be well-received by the woodturning community. And I am looking forward to doing an all-Glaser demo Thursday evening.

Ed

Re: Older miniGlaser

#5

Re: Older miniGlaser

john lucas

Ed I'm interested in your use of the round nose scraper for ornaments. I turn a lot of different styles (but not your sea shell ones) and have never had a need for a round nose scraper. I hate to miss out on an opportunity to buy or make a new tool.

Re: Older miniGlaser

#6

Re: Older miniGlaser

Ed Moore in SW VA

John,

When I make an acorn birdhouse ornament I like to taper the bottom a little. Then I drill out the interior and use a scraper to make the wall thickness uniform.



This picture shows the acorn body glued on a jam chuck at the rim in preparation for completing the shape. This is where I love that 3/8" spindle gouge in the miniGlaser set because it is so sharp and cuts beautifully. You can see how the body is tapered.

When cleaning out the interior and getting the wall thickness uniform you could certainly use a Hunter tool, but a catch here would be a disaster. A small scraper is easiest. And this may be the only time I use a scraper when making ornaments.

Ed

Re: Older miniGlaser

#7

Re: Older miniGlaser

Ed Moore in SW VA

Thanks Mike,

I had a PET scan yesterday and did NOT enjoy it. Hopefully it will show that the cancer is gone.

I am really enjoying using this set of red miniGlasers. I need to make some boxes for Heartwood, the artisans center, and I may try to make them using only miniGlasers. Although, using the Glaser 1/2" detail gouge might work too. you would love that tool.

Ed

Re: Older miniGlaser

#8

Finished product

Ed Moore in SW VA

Here are the acorn birdhouse ornaments.


The ideas came from Bob Rosand. Bob and I have an agreement that we can each make things made by the other.

Ed

Re: Older miniGlaser

#9

Re: Older miniGlaser

Scott Greaves

Hi Ed!

I usually stay out of the Glaser discussions, but . . .

I was one of the few who bought that nice set of the miniGlaser tools back when Paulo started selling them. They really are amazing! I enjoy reading your comments about the new tools, and I would like to see a review.

Scott.

Re: Older miniGlaser

#10

Re: Finished product

John Lucas

I forgot about your bird house ornaments. that's the tool I would use also unless I grabbed a Hunter tool.

Re: Older miniGlaser

#11

These are certainly beauties Ed, but.....

JamieDonaldson

..you really should buy some gold fish hooks for eyes. The price savings of the hooks vs the screweyes would allow you to enlarge your tool collection even more, if that's possible. ;)

Re: Older miniGlaser

#12

Mike Stafford

Re: These are certainly beauties Ed, but.....

Mike Stafford

Jamie, that is a scary thought. Ed lives up a hill and if the tools were to break loose from the shop and roll down hill I hate to think of the devastation. Just imagine sharp tools of every shape, size and make rolling down hill like a pyroclastic flow from a volcano. I can see it in the news, "Burnt Chimney devastated by wood and metal avalanche from unknown source. Elderly professor with Elvis hairdo commented, 'I know nothing'"

OH, the humanity...... :b

Re: Older miniGlaser

#13

Ah, TOOL ENVY, I love it!     

Ed Moore in SW VA

Re: Older miniGlaser

#14

Re: Older miniGlaser

Brian McInturff

I guess I don't rember the older MiniGlasers. Are they like the new ones except they each have their own handle? I'd like to see a pic as I've never seen them.

Re: Older miniGlaser

#15

Brian, see new Glaser thread.

Ed Moore in SW VA

Re: Older miniGlaser

#16

Dick Hines

Re: Older miniGlaser

Dick Hines

Son, you have an possum on your head.

Glad it's comming back Ed.

Re: Older miniGlaser

#17

I was just at JCCFS in Brasstown, NC

Ed Moore in SW VA

What do you expect? It's the possum capital of the world and they have a possum drop on New Year's Eve.

Thanks Dick,

Ed

Re: Older miniGlaser

#18

Mike Stafford

Dem possums make a.....

Mike Stafford

terrible mess when they hit the ground..... :b