Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

ANSI standards

Posts

ANSI standards

#1

Keith Tompkins

ANSI standards

keith tompkins

Just out of curiosity, I decided to look up ANSI standard Z87.1, the standard commonly applied to facemask/eye protection gear. I went to the American National Standards Institute website, and when I attempted to search their site...all that comes up is a book on President Obama's letters while in the White House when I click on the appropriate icon. Does anyone here know what standards a facemask must meet? Or how they arrive at that particular standard? Or, even better....a site where I can look up the info without the political nonsense?

Re: ANSI standards

#2

Re: ANSI standards *LINK*

Ed Larson

Keith this link does a good job of summarizing the standard. There are web sites that sell the complete standard for $60 -$80 if I remember corrcectly. The part of the standard that impressed me was that face sheilds that meet the standard must withstand being hit with 1/4 steel balls going 200 MPH (300 ft/sec.).


http://www.safetyglassesusa.com/ansiz8712003.html

Re: ANSI standards

#3

Re: ANSI standards

Richard Jones

Keith,

I have a set of the standards at work, will be glad to look it up tomorrow for you.

Rich

Re: ANSI standards

#4

Mike Mills

Re: ANSI standards

Mike Mills

Below are specifications for Z87 (most ratings for face shields).

Note, if it is not marked + by the manufacturer on the lens, it ain't + no matter what other terms the retailer may use.

ANSI Z87.1 and Z87+

New standard designates that lenses will be divided into two protection levels, Basic Impact and High Impact as dictated by test criteria.

Basic Impact: Z87.1

Withstand a 1� Steel Ball dropped from a height of 50 Inches without fracture.

High Impact: Z87+ All faceshield windows are to be marked with Z87, and a + sign. Faceshields must withstand two test.

High VELOCITY Impact Test

The High Velocity Impact test is designed to ensure protection from high speed, low mass projectiles. No contact between the lens and eye is permitted; nor may any parts or fragments be ejected from the lens that could contact the eye.

Projectile Specification Diameter: 1/4" diameter steel ball -- Velocity: 150 feet per second

High MASS Impact Test

The High Mass Impact test is designed to ensure protection from relatively heavy objects travelling at low speeds. To pass the High Mass Impact test, no parts or fragments may be ejected from the lens that could contact the eye.

A pointed projectile is dropped from a height of 51.2" onto a lens.

Projectile Specifications

Length - 5" Diameter - 1" Weight - 1 pound, 1.6 ounces

Re: ANSI standards

#5

Keith Tompkins

Re: ANSI standards

keith tompkins

Hey, thanks guys.

Re: ANSI standards

#6

I spoke too soon..........

Richard Jones

My set only includes ANSI standards as related to building codes.

Rich