Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

best finish for shaving brush?

Posts

best finish for shaving brush?

#1

best finish for shaving brush?

Burt

Hello,

well as the title states, I'm looking for a water-proof finish for a wooden shaving brush handle.

I have CA, oil-based poly, and slow-set epoxy resin used for fiber-glassing.

I'm leaning towards using two coats of epoxy, sanding it smooth with 800 grit paper and polishing it with polishing compound and a buffing wheel.

Any thoughts, or suggestions for other products, would be welcome.

Re: best finish for shaving brush?

#2

Re: best finish for shaving brush?

Cyril Griesbach

Burt,

I"d guess that the epoxy would be the most durable. I have a couple of shaving brushes from Semogue in Portugal. One has an enamel paint and the finish on the other is unknown to me. However, my favorite shaving brush I made myself from Corian and a Badger knot from The Golden Nib.

Re: best finish for shaving brush?

#3

carl

Re: best finish for shaving brush?

carl

No finish, i have a Wenge brush i made almost two years ago. once in awhile i will rub some baby oil on it because it is in the bathroom cabinet. Looks like i just made it yesterday. Carl

Re: best finish for shaving brush?

#4

Re: best finish for shaving brush?

Burt

Thanks for the responses guys.

Corian is a great idea, since it is machinable and not affected by water, did it polish well?

I hadn't thought of leaving it unfinished. Bet it would be fine for dense, oily woods. I'm thinking of using oak or cherry and would rather seal it up some.

Re: best finish for shaving brush?

#5

Mike Peace

Re: best finish for shaving brush?

Mike Peace

I did one of Cocobolo with no finish and it always leaves a slight colored water mark on the sink. It does not look shiney. Been using it about 9 months. I made a couple for my sons with a CA finish. I have not gotten a report back on how they have held up since Christmas.

Re: best finish for shaving brush?

#6

Re: best finish for shaving brush?

Burt

Thanks for the reply Mike,

if your sons are regular shaving brush users(i.e. every day shavers), six months should give a good idea as to the durability of CA in this application.

Would you mind asking them if there is any cracking or peeling?

Thanks again.