Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Anybody tried the Little Engraver...

Posts

Anybody tried the Little Engraver...

#1

Anybody tried the Little Engraver...

Barry Irby

Made by General I saw at Lowe's. It was small, about the size of a fat fountain pen andrus on two AAA batteries. I think it was about $10 but I am not sure, it was in a row of promo type items.

Surely can't be heavy duty enough to use for piercing and carving, but might be good for signing work. They pictured it engraving your name on your tools. Came with a tiny diamond burr. Ran 20,000 RPM.

Re: Anybody tried the Little Engraver...

#2

Re: Anybody tried the Little Engraver...

john lucas

I have to run to town today, I'll take a look. My engravers are reciprocating. I've tried using rotary tools but found them difficult but was a small cutter mounted in the larger Dremel handle. If they have those at Lowes I may pick one up and give it a try. It's probably useful for something (which is what I say about every odd tool I pickup at the flea mkt).

Re: Anybody tried the Little Engraver...

#3

Re: Anybody tried the Little Engraver...

Barry Irby

Local Lowes has a bunch of stuff sitting in the aisle with signs about Approved By Dad or some such thing. They have $10 items and $25 stuff, this was sort of in between. Did not take the time to determine which it was.

Re: Anybody tried the Little Engraver...

#4

Rob Wallace

Re: Anybody tried the Little Engraver...

Rob Wallace

Thanks for posting this Barry - I just picked up a set of 3 Kobalt slip-joint pliers for $ 10 at our Lowe's from this aisle sale....it's been going on for a few weeks. I'll have to look for the engraver that you mention.

Rob

Re: Anybody tried the Little Engraver...

#5

Re: Anybody tried the Little Engraver...

Doc Green

Barry, I've never even seen the item but because it runs on two AAA batteries I suspect it would not be suitable for doing anything with wood. Simply not enough energy contained in the batteries, which are not cheap.

The 20,000 RPM is obviously a no-load value. The instant you touch it to the wood I think it will probably slow down and practically stop.

This item isn't going to break the bank, but I think it will be a waste of money.

FWIW ~Doc

Re: Anybody tried the Little Engraver...

#6

Re: Anybody tried the Little Engraver...

Dick Wilson

I agree with Doc. Years ago I bought a small rotary engraver with an AC adapter. I wanted to use it to sign my work. It was a waste of money. Immediately slowed down to a stop.

Re: Anybody tried the Little Engraver...

#7

This is why I asked....

Barry Irby

I suspect it is underpowered and would be pretty useless. Things are pretty grim for me and even a $10 purchase is not as whimsical as it used to be. They show somebody putting their initials on metal tools. Just got me to wondering if I could sign my work with it. So I thought I would let one of you confirm my suspicions, IE spend your money and save mine. ;)

Re: Anybody tried the Little Engraver...

#8

Re: This is why I asked....

john lucas

Barry My Lowes didn't have one. However I learned something interesting. If I drive the car it's an 18 mile round trip. If I drive the motorcycle it's 45 and you get sunburned arms. :)

Re: Anybody tried the Little Engraver...

#9

Dick Hines

Re: This is why I asked....

Dick Hines

I know what you are talking about , John. I live 1 1/2 miles from a little country store. It some times takes me 30 to 60 mins just to run up to pick something up.

Re: Anybody tried the Little Engraver...

#10

Re: This is why I asked....

John Jordan

You are clearly taking the wrong route on your errands. A trip to the Post Office, which is about 10 miles round trip, often takes Vicki and I 4 hours or more. I guess I need a faster motorcycle. :)

John

Re: Anybody tried the Little Engraver...

#11

Rob Wallace

Kind of reminds me of the woodworker....

Rob Wallace

....who really isn't into tools whose mantra is:

"Why buy when you can borrow?" ;)

The engraver wasn't at our Lowe's yesterday either...

Rob