Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Repairing a cracked rim

Posts

Repairing a cracked rim

#1

Joe Fleming

Repairing a cracked rim

Joe Fleming

All,

I have a 12" thin-walled bowl made by Mike Mahoney during a demo that is a user bowl. We've had it for seven or eight years. It has recently cracked about two inches in the end-grain section of the bowl from the rim down. The section that cracked is shy of 1/8" thick. I tried gluing the crack, but that only held for a couple of months. I'm not looking for a mechanical means to repair the bowl that would still allow us to use the bowl. For example, can I stitch the bowl with some kind of synthetic thread. Or do I do some kind of staple? I'm looking for suggestions.

Thanks.

Joe Fleming - San Diego

Re: Repairing a cracked rim

#2

Katherine Kowalski

Re: Repairing a cracked rim

Katherine Kowalski

Hi Joe,

Jerry Kermode is well known for using wooden "stitches" or butterfly patches to repair such cracks. (Check out his work online).

Recently Mike Mahoney himself posted on his blog about repairing cracks. You may want to contact him for his suggestion.

In any case, it's a design opportunity :-)

Katherine

Re: Repairing a cracked rim

#3

Re: Repairing a cracked rim

D. Hansen

Joe, if it is an irregular crack you might consider filling it with "Inlace" and maybe make it more irregular with carving or drilling to make it look like a tree or something.

Re: Repairing a cracked rim

#4

Re: Repairing a cracked rim

mjonesrdg

If it were a bowl that I had made that cracked at your house, I would replace it with another bowl. (Mahoney might feel that way too)

Re: Repairing a cracked rim

#5

What, no lifetime warranty on made in the USA?

Galen Vetterick

:D

Re: Repairing a cracked rim

#6

Re: Repairing a cracked rim

robo hippy

Mike does have a life time guarantee on his bowls that he sells. Personally I would want to keep it for sentimental reasons. I am curious as to how you repaired it the first time. If I am going to try to glue the crack together, I would use Titebond 2 or 3, and use my plastic stretch film to pull it back together as it is impossible to clamp it back together. Really stretch it out. I have had people who liked the cracks in their bowls, and as long as salad dressing isn't pouring out of it, it will continue to serve fine as is, though there may be food getting stuck in the crack. It might have cracked due to unknown stress that was in the wood from the beginning, so pulling the crack back together may be an exercise in futility. You can also epoxy and fill the crack. I never liked the stitches method for some thing I would want to use on a daily basis for foods.

robo hippy

Re: Repairing a cracked rim

#7

Richard Allen

Duck Tape

Richard Allen

I have heard that duck tape can fix almost anything. For stuff that duck tape can't fix there is WD40.

Re: Repairing a cracked rim

#8

Joe Fleming

Re: Duck Tape

Joe Fleming

Richard, Somehow, your response does not surprise me. :) Joe

Re: Repairing a cracked rim

#9

Joe Fleming

Re: Repairing a cracked rim

Joe Fleming

More information - the crack is straight down from the rim, about 2" long. The crack did not open up. First repair was to try superglue with a band clamp holding it together until dry. Joe

Re: Repairing a cracked rim

#10

Joe Fleming

Re: Repairing a cracked rim

Joe Fleming

We like the bowl and it has meaning to me because I watched it being made. Since we have used it for around seven years, we would prefer to repair it. Also, since it was a demo bowl made in competition with Stuart Batty, I don't presume any warranty. I did email Mike as suggested. Thanks

Re: Repairing a cracked rim

#11

Re: Releive the stress

Steve Criscenzo

I would suggest that you drill a small hole just beyond the end of the crack. For a closed crack, a 1/16" hole should do it. This hole will help keep the crack from propagating further.

If the crack is closed, CA should work unless the sides are contaminated. I would start with thin from both sides and follow with medium right behind the thin. Use masking tape on either side of the crack to avoid a mess.

Good Luck

Steve

Re: Repairing a cracked rim

#12

Re: Releive the stress

Peter Lamb in SC

Sew it p with copper wire in an "X" pattern

Re: Repairing a cracked rim

#13

Joe Fleming

Re: Repairing a cracked rim

Joe Fleming

Thanks everyone. SWMBO (aka LOML) must cast the deciding vote before I proceed. These are all great suggestions.

I'll post before and after photos when I'm done.

Joe

Re: Repairing a cracked rim

#14

Re: Repairing a cracked rim

clifton c

Joe, I went the stitching route (I was pushed). I understand a bowl with sentimental value. I used silver wire because of its antibacterial and antifungal properties. Titebond does not dry as brittle as ca and might be a better choice. Small lengths of silver wire are usually available from your local bead shop, but they rarely carry drill bits to fit the gauge wire. I get these bits from Harbor Freight item# 44924. The bowl I fixed is a working bowl. It is a little thicker than your eighth inch, but so far its held.

Hope this helps...

Clifton