Gave the Mcnaughton a real work out
Mike Foster
tonight. I was wanting some fairly dry shavings to use in my smoker for the bees and realized they were all soaked in the big pile outside from all the rain we have had. I decided to produce some and put a big blank I've had kicking around in the shop. I started to turn this maple last fall, and wanted to core it, but realized the Mcnaughton rest I had for the Woodfast wasn't tall enough for the Beauty. I just sealed the blank and left it sitting in the shop till I got a new post. Well the shop is heated the blank dried much quicker than I anticipated. I forgot about it and it lived in the heated shop over the winter. I would guess the blank is 8-10" thick and 18" in diameter.
So I put the blank on the lathe and tried coring it as is. Imagine coring a dry hard maple 18" bowl. I had no trouble stalling the Robust, but by keeping the Mcnaughton honed and going slow, it cored with few problems. I was impressed.
Oh, in the process I produced a pile of nice dry maple shavings that will feed my smoker for a long time.
"



