Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

NEON light in a future piece?

Posts

NEON light in a future piece?

#1

NEON light in a future piece?

charliel belden

Saw this at last weekends Makers Faire and, at $10, had to have one!

What it is is a battery pack for two AA batteries, a push button to turn in on and off, a slider switch to make either glow continuously or blin on and off, some shrink tubing to connect the battery pack to the "neon" part which is 3 feet of 1.2mm diameter flexible tubing. It's from coolneon and the have a website (you add the .com) that gives the details on this and other flexible neon tubing they carry.

The specs say you can bend it 180 degrees with an ID radius of 1/8" but based on my experience that would probably need a VERY warm day to do it.

The piece in the example photos is a hollow form failure that I'm working on making a support device for the Stealth Top I posted a month ago. Ignore the piece and focus on the lighting effect.

Comments, suggestions and questions welcomed


img

Re: NEON light in a future piece?

#2

Steven Antonucci

Already added the East Coast Maker's Faire

steven antonucci

to my calendar...

going without any expectations...except that it will be awesome.

S

Re: NEON light in a future piece?

#3

Richard Allen

Re: NEON light in a future piece?

Richard Allen

Hollow form with "driver" in hollowed out base and light wire inside a hollow form with a pressure sensitive switch so that the light starts to blink when the hollow form is picked up. Should be able to cut a shallow grove inside the hollow form to glue the light wire into.

Re: NEON light in a future piece?

#4

Wouldn't have to touch the piece to turn the light *LINK*

charlie belden

There's something called a Light Detecting Resistor. When the light that's falling on it changes, as when a shadow passes over it, it's resistance changes. That change can be detected by a micro-controller and trigger some behavior you tell it to perform - like turning the neon light on - or off.


Piece with a shadow triggered behavior