Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

*** SURVEY: THE IDES OF MAY *** *LINK*

Posts

*** SURVEY: THE IDES OF MAY *** *LINK*

#1

Ellis Walentine

*** SURVEY:  THE IDES OF MAY *** *LINK*

Ellis Walentine

Well, folks, sometimes the Ides sneaks by on me, and this month is one of those times. This month, I would like to address the issue of how you decide which tools and supplies to buy:

What influences your buying decisions of woodworking tools and associated paraphrenalia? Do you get your information mostly from magazines, woodworking shows, retail store demonstration, on-line reviews, discussion sites, friends, clubs, other sources?

As usual, we will edit your replies and forward them to our friends at Woodworker West magazine to be published in our next column, in the July/August issue.

Thanks for participating!

Ellie Walentine, Host


Woodworker West Magazine

Re: *** SURVEY: THE IDES OF MAY *** *LINK*

#2

Brad Vietje

Re: *** SURVEY:  THE IDES OF MAY ***

Brad Vietje

Here are my purchasing guidelines, in a nutshell:

1. personal recommendation (live demo or club meeting)

2. advice from on-line turning groups like WoodCentral

3. Budget Constraints.

I have a short list of things I'd like to buy, but #3 trumps the rest, so all but the most essential will have to wait for increased cash flow!

Safe spinning,

Brad Vietje

Newbury, VT

Re: *** SURVEY: THE IDES OF MAY *** *LINK*

#3

Re: *** SURVEY:  THE IDES OF MAY ***

mjonesrdg

Here is a brand new consideration for me. MADE IN AMERICA. Only recently has this influenced my shopping/buying activities. But today, I make an effort to find out where an item is made, and I make the choice for MADE IN USA one of my priorities. I'll spend more time searching and researching, and I'll spend a bit more money, and this is a small way that I can be more patriotic.

Re: *** SURVEY: THE IDES OF MAY *** *LINK*

#4

Steven Antonucci

Turning as a community

steven antonucci

What influences your buying decisions of woodworking tools and associated paraphrenalia? Do you get your information mostly from magazines, woodworking shows, retail store demonstration, on-line reviews, discussion sites, friends, clubs, other sources?

Well...

I typically buy the things I need from the vendors that support the turning community. I always try to buy locally via one of the two clubs I belong to in order to support the club as well as fill my need to replace consumables. Sandpaper and Anchorseal never go bad, and great deals can be had if you aggregate the buy to a club level.

As far as tools go, I only buy tools to support the community. I have too many, and even after getting rid of a bunch that I wasn't using, I still continue to find myself occasionally adding to the collection. I recommend a lot of tools to other buyers, so I try to make sure that I have some practical exposure to the tools. It wouldn't be fair to recommend something that I didn't use, so I buy stuff...even if I don't really need it.

The only thing that matters to me is relationships. I want to know the people behind the products, since I am putting my personal reputation on the line by recommending their products. Just as I trust some folks, many trust me. The vendors that understand this get my business.

Steven

Re: *** SURVEY: THE IDES OF MAY *** *LINK*

#5

Re: Forums and demos

Steve Criscenzo

I do not belong to a local club so my interaction with the community is largely through forums and mostly Woodcentral. I place a great deal of faith in the opinions and recommendations offered here.

On items that have multiple purchase opportunities, (tools, sandpaper...) I rely on my experience with quality, price and customer service.

Re: *** SURVEY: THE IDES OF MAY *** *LINK*

#6

Re: *** SURVEY:  THE IDES OF MAY ***

Mike Rubes, Apex, NC

When I first got into woodworking and specifically turning, I relied heavily on magazine reviews. But once I discovered the online forums and online reviews, I use those resources primarily to find out about tools and equipment. Like others, though, I use these resources to find out information, but a large factor determining what to buy is how much I can spend on it!

Mike

Heading to the lathe in Apex, NC

Re: *** SURVEY: THE IDES OF MAY *** *LINK*

#7

Steven Antonucci

Agreed.

steven antonucci

Re: *** SURVEY: THE IDES OF MAY *** *LINK*

#8

Re: *** SURVEY:  THE IDES OF MAY ***

Jorge Casta�eda

For years and years my small budget push me to buy in the rust outlets, never did mind that because I love old tools and many times I feel they are superior.

That was in my boats and flat work days.

For fine woodwork, top performers, like japanese saws..

Then I became a turner, now topmost must be made in USA, I am in the monkey sees, monkey does group, so my purchases are usually after seeing somebody I respect using a tool and then those wishes get through the strainer, the thin wallet....

Re: *** SURVEY: THE IDES OF MAY *** *LINK*

#9

Re: *** SURVEY:  THE IDES OF MAY ***

Jerry Klug

Like many turners I have an uncontrolable urge to aquire tools. The urge is tempered by budget so I like to see it used by a demonstrator or fellow turner. I succom to being attracted to the new tools by comments on Wood Central posts or magazine articles then I go into the age old hunt/gather mode.

Re: *** SURVEY: THE IDES OF MAY *** *LINK*

#10

Re: *** SURVEY:  THE IDES OF MAY ***

robo hippy

Some times I buy because of need, some times out of curiosity. If I am needing some thing for a particular use, I check the forums. Demonstrations are important.

I bought the Sorby Spindle Masters after a demo by a factory rep. Not a good choice, too flimsy. I bought a Fluteless gouge from Doug Thompson (made in the USA), excellent choice, and a multi purpose tool for both bowls and spindles. That was a curiosity choice.

robo hippy

Re: *** SURVEY: THE IDES OF MAY *** *LINK*

#11

George Taylor

Re: *** SURVEY:  THE IDES OF MAY ***

George Taylor

Advertisements may spark my curiosity but I rarely purchase an item if I do not see its use live (demo or workshop) or get a strong recommendation on the forums.

George

Re: *** SURVEY: THE IDES OF MAY *** *LINK*

#12

Re: *** SURVEY:  THE IDES OF MAY ***

Terry Scott

Having just spent the weekend and some demonstrating at the Brisbane working with wood show Id say a fare amount of woodies buy what they see being used by demonstrators if sales were any indication.

Many had their partners in tow but still manged to sneak away and come back for a bit of retail theropy.

I was surprised by the amount of new turners that approached me and asked the question I am starting to turn what do I need

My reply was always not much but make sure you get quality ,Buying a Chinese set of 6 chisels for $100 is not the way to go buy 4 $80 ones 2 Bowl gouges 35degree 55 degree a parting tool and Skew Chisel

I use these 98 percent of the time so have to ask why I have 100's of chisels.

Yes I have the wood turners sickness a tool fetish .My excuse is I have a real job so anything I make fro turning can go back into turning

Referrals by others is probably my main source of purchase

Re: *** SURVEY: THE IDES OF MAY *** *LINK*

#13

Re: *** SURVEY:  THE IDES OF MAY ***

Mark Mandell - Gone Round In Jersey

You have a "Real Job"?? When do you sleep? :D

Re: *** SURVEY: THE IDES OF MAY *** *LINK*

#14

Steve Kubien

Alert the media.  We have a news flash!

Steve Kubien

This just in from our correspondent in New Zealand: Terry Scott has a tool fetish! Shocking stuff really.

Runnin' and duckin'

Re: *** SURVEY: THE IDES OF MAY *** *LINK*

#15

Steve Kubien

Re: *** SURVEY:  THE IDES OF MAY ***

Steve Kubien

There a number of factors...

When I was looking for my first decent gouges, I visited this forum for suggestions and answers. That led me to Doug Thompson. His tools had/have a great reputation, pricing was very fair (not cheap, but fair. There is a difference) and I really liked that he was/is an independent maker. I love supporting smaller businesses when I can (that's a big motivator for me). My Thompsons have preformed great, Doug's service is second to no one and I know he helps and supports the turning community on a lot of levels.

When I was looking for decent abrasives, I contact Vince about his blue discs that everyone loved so much (more good advice from the WoodCentral community). The information beyond price and availability I received was superb. I thought "this is a guy who knows his stuff and is passionate about service and product". I placed my first order and I've been ordering from Vince ever since. Great product, great service, fair price. (do you see a trend here?)

For me, I prefer to buy from North America (Canadian when I can). This is not a huge consideration for me but I do think about it.

Re: *** SURVEY: THE IDES OF MAY *** *LINK*

#16

Re: *** SURVEY:  THE IDES OF MAY ***

John Lucas

I have way to many tools. Well let me phrase that differently. Everyone else thinks I have too many tools. I on the other had am always on the lookout for something that makes the job easier, faster, or cleaner.

I read a lot to kind of keep up on what out there with an eye toward will that help me in some way. While I'm building something I also make mental notes on what might make it easier.

Once I've decided I need something I do a lot of research. Money has always been tight for me so I rarely buy something spur of the moment. Quite often I will research what I think I need and then I will watch sales flyers sometimes for a year or more and then buy the tool when it goes on sale or find one in the Classifieds. I rarely by a tool spur of the moment.

If you look around my shop you can bet I paid less than full price for everything in there and I have a lot of stuff.

Re: *** SURVEY: THE IDES OF MAY *** *LINK*

#17

Jim Evans

Re: *** SURVEY:  THE IDES OF MAY ***

Jim Evans

I don't have a lot of tools, but I do the same process before I buy.