Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

What I did yesterday... *LINK*

Posts

What I did yesterday... *LINK*

#1

Steven Antonucci

What I did yesterday... *LINK*

steven antonucci

Every year, the NJ woodturners leans on its members to mentor less experienced members in our Spring Workshop series. Most of the sessions are a half day or a day, and cost between $25-35. Since many of the sessions are lathe centric, the sessions are usually one on one or two.

I decided that in order to maximize the opportunity, I would lead a session on toolmaking for turners II. In the past, we've had a similar session, and so I know that I can put too much on the plate. I had some of the prep work done before folks got to the shop, and an assistant (Thanks Wil!) who kept things moving along. The weather was a little bit chillier than usual, but the rain held off.

For the 12 people that attended, each left with a chatter tool, an Ellsworth style boring bar, a threading tool (once they finish it at home) and a hook tool(still needs to be sharpened). While we had some technical difficulties in ordering the pizza lunch and lighting the forge, we eventually got there.

Jon Teeple was kind enough to take pictures in between cramming his way into a tight shop (Thanks Jon). In the end, we priced out the tools from a current catalog (62+76+40+92=~$250!) and everyone that attended MADE money with their investment.

Folks came at 10AM and left around 630PM. 20 minutes of putting tools back where they go, and I was on the couch ready to snooze...

Steve

P.S. Final shout out to Hitoshi for getting the steel to me!


Jon's pictures of my toolmaking workshop

Re: What I did yesterday... *LINK*

#2

Re: What I did yesterday...

Randy Gleckler

Steve,

Your in the Jersey Area right? If I ever make it up there even close, can I sign up for a similar style class. I'd love to have been there, sounds very educational and like a lot of fun. Glad you had a good day.

Re: What I did yesterday... *LINK*

#3

Steven Antonucci

Northwestern NJ, and visitors welcome...

steven antonucci

Re: What I did yesterday... *LINK*

#4

Leo Cuellar

Re: What I did yesterday...

Leo Cuellar

Looks like you all had a good productive day. Great pictures. My forge is a smidge larger than yours, but I see we have the same taste in anvils :D

Re: What I did yesterday... *LINK*

#5

Pic of the shatter tool?

Jorge Casta�eda

Re: What I did yesterday... *LINK*

#6

Steven Antonucci

I have much better taste in anvils, but I can't...

steven antonucci

afford my taste.

S

Re: What I did yesterday... *LINK*

#7

Leo Cuellar

Ain't that the truth!

Leo Cuellar

But railroad iron sure does ring nice.

Re: What I did yesterday... *LINK*

#8

Steven Antonucci

three of the four

steven antonucci

from left to right:

A handle from blue diamondwood(or close)

The chatter tool (rod, hole, setscrew) blade is from an old bowsaw blade that I cut with shears to fit the hole.

Ellsworth style hollower, two hole version (cutter can be mounted straight or as shown)

hook tool (still needs finish work- honing ancleaning off all of the scale)


Not pictured is the thread chaser... In all, we made 13 sets of these yesterday...right shoulder is a little sore today.

S

Re: What I did yesterday... *LINK*

#9

Steven Antonucci

I need a bigger piece

steven antonucci

I think I can get a longer piece at the local scrap recycler. I need to get over there. I'm also going to try to make a deal with the blacksmiths at Peters Valley this weekend to see if I can talk them out of a spare anvil somehow...

S

Re: What I did yesterday... *LINK*

#10

Alan Zenreich

Re: What I did yesterday...

Alan Zenreich

Sorry we missed your workshop. Lauren and I were at the "other" club event yesterday, as it better applied to her work. We're also attending tonight's meeting to see just a bit more of Graeme's work. I think it's time to join your club. Can't have too many club affiliations, eh?

Re: What I did yesterday... *LINK*

#11

Steven Antonucci

see you tonight

steven antonucci