Further eccentricities.
Leo Cuellar
Has anyone else tried playing around with a tapered glue block? Gives you some of the motion of the Escoulen chuck without all the expense. Lots of variations to try with this. Different tapers, reorienting the piece multiple times on the block face.
Shaped the bottom first on this one then added the taper to do the top. It is just over 5 & 1/2". First stab at this, so the shape is a little uninspired, just trying to get a feel for the process. Kept the speed down under 1000rpm as this was my first time using hot melt glue on the lathe. Was very solid, with no vibration at this size.





