Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Carved Turnings...

Posts

Carved Turnings...

#1

Brian McKearney

Carved Turnings...

Brian McKearney

I've long admired the turnings and carvings of folks like Jacques Vesery and Dixie Biggs. I was wondering if anyone may have some pointers about where to begin - I think that I'm interested in learing how to carve crisp details on small turnings such as the black egg-shaped object in the attached photo of one of Dixie Biggs extraordinary items (I hope that it was OK to post this pic!).

I don't expect to start out great, but I've been thinking about this for a long while and quite honestly I'm not even sure what tools to begin with. Dremel/rotary carver? Burner used to carve the wood? Carving knives?

Any ideas and/or suggestions? Any suggestions where to turn for instructional materials (a book would be wonderful)?

Thanks.

Brian

Re: Carved Turnings...

#2

Re: Carved Turnings...

Dave Long

If you're going to the AAW Symposium in St. Paul next month Dixie Biggs is going to be giving some demos. She is a very good instructor and is usually open to spending extra time with folks if she isn't pressed for time.

Re: Carved Turnings...

#3

Brian McKearney

Re: Carved Turnings...

Brian McKearney

That would be awesome, but just not in the cards at the moment between finances and family. Thanks, though.

Re: Carved Turnings...

#4

Re: Carved Turnings...

john lucas

Brian Just start. Buy something like a Dremel with a cutter or two and see what you can do. Learn to read the grain of the wood so you get cleaner cuts. Mostly just have patience. Start small and simply. Figure out what other tools you have around the shop to shape wood. Anything that cuts or abrades is game. Sandpaper glued to sticks of different shapes is a great addition.

I started my carving with a Dremel and set of General tools palm carving chisels. I still use those 5 tools for many of my carvings.

When I did my first serious carving that won a local art show first place I used nothing but the bandsaw for rough shaping, a Nichelson cabinet makers rasp, for finer shaping, The General carving tools for more fine details and a jeweler saw and fingernail files for the last details. It is not a difficult carving. Anyone could have done it. I just took the time to take off little cuts and sneak up on the final results. That's the secret at first.

As you progress you will learn more about how wood responds to certain tools and you will pick up other tools. Each time you buy a tool play with it on cheap easily carve wood just to see what it will do. You will be surprised how fast you will progress.

Re: Carved Turnings...

#5

Re: Carved Turnings...

john lucas

I forgot to mention pyrography tools. Dixie Biggs and others use wood burning tools to do some of their carvings. Of course these have to be painted unless you plan to spend a great deal of time sanding away the burned areas. However it is a good way to get fine details quickly. It is the easiest way to get undercut details on leaves.

Re: Carved Turnings...

#6

Leo Cuellar

The Big Book Of Whittling And Woodcarving

Leo Cuellar

By E.J. Tangerman is a great book for beginning to learn carving techniques. It can usually be found in most libraries or secondhand book stores. You can begin with something as simple as a good sharp pocket knife.

Re: Carved Turnings...

#7

Re: Carved Turnings...

Chuck Engstrom

Hi Brian -- several resources come to mind. I went to a bird-carving competition not long ago and found plenty of vendors with books, tools, etc. Birds may not be your thing but those folks do know how to do fine detail. There's probably a similar gathering somewhere near you at some time in the year -- a google of "woodcarving shows" gets about 500,000 returns.

thecarvingpath.net "welcomes carvers from many disciplines, whose work involves small scale carving." It's a forum-based website that requires registration but seems quite friendly and may have lots of info for you. I joined but confess I haven't visited much. One member's site that I did visit is http://www.janeljacobson.com, very very impressive. She may be at St Paul AAW symposium.

YouTube has plenty of carving videos, and I got good pointers on sharpening carving tools from some of them.

Good luck with it--

Chuck