Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Developing a Safety Culture (Long)

Posts

Developing a Safety Culture (Long)

#1

Developing a Safety Culture (Long)

Steve Criscenzo

Given the posts of the recent days and the unfortunate accidents over the last month, I would like to share a few more thoughts.

As I have mentioned in previous post, I spend a great deal of time dealing with safety in my professional life as a manager for a company involved in engineering and field testing. One of the important lessons I have learned is that one of the best ways to prevent accidents is to develop a true safety culture within the work place. Properly developed, this safety culture will naturally extend to activities outside the workplace including hobbies and household chores.

The basis steps in developing a safety culture are to:

� Break any task into smaller discrete components

� Identify the possible hazards for each step

� Prepare mitigation for the hazards

� Communicate the plan to all involved

� Provide appropriate Personal Protective Equipment (PPE)

� Be sure we have the proper tools (and in good working condition)

� Provide training as appropriate

� Monitor the activity and stop work if unexpected conditions are encountered

� Review the effectiveness of the plan at the completion

� Communicate and evaluate constantly

Several years ago I managed a field operation involving over 50 people working for four months. Each work day started with a safety briefing. There were people that at the beginning of the project had to be forced kicking and screaming to wear proper PPE and follow procedures. Some of these same people a few weeks later were offering suggestions on safety improvements. Others did not last two days before they were removed from the project for unsafe practices.

By the end of the four months, I was no longer leading the safety briefings, the project staff did. The staff took responsibility (and pride) for their personal safety and that of the entire team. There was definitely a cultural change in these folks over their time on the project and most still carry it with them today. Safety was part of their daily routine.

It has become second nature to me, to bring this safety culture home. I find that as I start an activity in my shop, I mentally run through the Job Safety Analysis process. Do I still make mistakes, you bet! But hopefully with the right PPE and care, I will live to fight another day. Furthermore, I always take the time to evaluate the cause of any incident and determine what I can do differently the next time.

We all see things that make us cringe; I cannot read a magazine or watch a home improvement show without noticing a hazard or lack of proper PPE. (Why don�t we provide face shields to the young folks in the classes at our symposiums?) But are we ourselves setting the right example.

It is up to those of us who teach, demonstrate, create videos, or write articles to set a proper example. Safety is more than a face shield or a guard on the lathe. Safety is a process that must be learned, taught and constantly communicated. It is up to us to lead.

Sorry to be preachy. Had to get this off my mind. Spin Safe

Steve

Re: Developing a Safety Culture (Long)

#2

Re: Developing a Safety Culture (Long)

Mike Brazeau

Thanks Steve. My SIL is a Health & Safety Specialist with Toyota and I have to admit just having that relationship has improved my awareness level. My little 6 1/2 year old grandson is just like his dad. It has moved from daily action into his DNA I think. The death of a turner nearby two years ago has made face shield use for me pretty much automatic. I find as the aging process moves on, it really pays to pause and evaluate actions carefully before proceeding in haste. Brain is not a sharp as it once was.

Re: Developing a Safety Culture (Long)

#3

Steven Antonucci

First things first

steven antonucci

You hit the nail right on the head. The first thing you have to do is develop the CULTURE. Change management is something I used to sell, and it is the process of converting hearts and minds to WANT to adopt whatever process or program you are trying to rollout.

Too many times, people attempt to dictate change. Not everyone can change, but you will get more folks to change via education vs. policy. These thread provide education for everyone, and those who are open to it will change on their own. They may even be influential in changing others around them, as they likely have informal influence within their groups that someone in a leadership role will not. Identifying informal leaders is the key to large scale change.

Let's continue the education process every chance we get...

Great post, Steve

S

Re: Developing a Safety Culture (Long)

#4

Betty Scarpino

Re: Faceshields for youth at symposium

Betty Scarpino

Yes, a culture of safety is a good idea, always. I agree with what you have written, except I would like to point out that the youth turning program at the AAW national symposium does feature faceshields for all the youth participants. Not only that, safety is stressed in other ways, too, by having plenty of assistants in the room during each session. The faceshields are donated to the program and at the end of the event when the lathes and tools are raffled, a faceshield goes home with every winner of the 25 lathes and sets of tools.


Re: Developing a Safety Culture (Long)

#5

Re: Faceshields for youth at symposium

Steve Criscenzo

Betty

Thanks for the information. You are setting a great example. Unfortumately, I do not think it is consistently done with youth classes. We just need to keep pushing.

Steve.

Re: Developing a Safety Culture (Long)

#6

Katherine Kowalski

Re: Developing a Safety Culture (Long)

Katherine Kowalski

Thank you for an excellent post Steve, I am going to copy it and save it to my archives.

I've found that since I have been using power tools, I am more safety conscious than ever. I feel "naked" if I don't have safety glasses on at all times when I'm in the shop. I also wear ear muffs as I am very concerned about hearing loss.

Honestly, I'm amazed at the activities people do without PPE.

Katherine

Re: Developing a Safety Culture (Long)

#7

Re: Developing a Safety Culture (Long)

Bill Turpin in WNC mountains

Consistantly heard at our demos: I don't wear a faceshield when I demo, it messes up the sound. There are mics available that will work inside a faceshield.

We have a self supporting, metal framed, poly-carbonate shield between the demonstrator and the audience. In seven years it has saved people at least three times.It is ALWAYS between us and the good guy.

Re: Developing a Safety Culture (Long)

#8

Alan Zenreich

Re: Developing a Safety Culture (Long)

Alan Zenreich

Bill,

I agree... people find the lamest (or is that pronounced "creative") excuses to avoid doing what they know they should do < vbg >

I hear motorcyclists say "I know I should wear my gear, but I'm just riding down to the store". I explain that the other drivers don't know, nor care, that you're taking a short ride... and that they're not supposed to rear end you that day.

They say "I don't know why I do that, I know better"... and I just quietly shake my head.

Re: Developing a Safety Culture (Long)

#9

Re: Developing a Safety Culture (Long)

George Daughtry

A very good topic to bring up periodically so the newer turners will see it. I have been turning about 20 months and have seen too many demonstrators in the club meetings and in videos working without safety equipment such as face shield or safety glasses (both are a good idea).

I was a safety engineer/consultant for over 30 years so I have seen and heard most of the excuses for not using safety equipment or methods...uncomfortable, can't talk with it on, can't see the work clearly, on and on.

Most folks do not learn from other experiences...they have to have it happen or almost happen to themselves first.

Let's all keep talking up our safe practices and questioning anyone not doing so.

George Daughtry

Re: Developing a Safety Culture (Long)

#10

Dale Jablonski

Re: Developing a Safety Culture (Long)

Dale Jablonski

I'm relatively new to turning but I fought wildfire for 33 years. Safety was always drilled into me as priority 1. I in turn have always attempted to reinforce this "culture of safety" into the folks I worked with. Working with wood, especially as a forester, brings me great joy and satisfaction. At the same time it can be dangerous. I always wear my PPE and I encourage others to do the same. I would also strongly recommend that any woodturning school that does not employ a shield to protect their audience/students should immediately rectify that situation.

Re: Developing a Safety Culture (Long)

#11

Re: Faceshields for youth at symposium

Dick Coers

I would suggest that every youth attending those sessions should go home with a face shield. Real cheap lesson and gift for them.

Re: Developing a Safety Culture (Long)

#12

Betty Scarpino

Re: Faceshields for youth at symposium

Betty Scarpino

That's an excellent suggestion, Dick, but it's important to get your suggestion to the right person. Here are two people: Dale Larson (dale@woodturner.org) or John Hill (look up his email on the AAW membership list). Dale is chair of the symposium committee. John Hill is an advisor to the AAW Board and is someone who has a connection to vendors/donations and was instrumental in starting the Youth Turning Program at the symposiums.

I could pass along the suggestion, but I know for sure you would get a better reception than I would. Good luck.