Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Glaser tools - have yours ...

Posts

Glaser tools - have yours ...

#1

Glaser tools - have yours ...

Ed Moore in SW VA

arrived yet? :D :D I have been looking for an English bedan (trapezoidal cross-section) made from A11 or CPM 10v steel for quite awhile. I ordered one from Glaser Hitec and it arrived this morning. A quick touch on the sharpening wheel and then a test on a piece of scrap wood brought out a smile on my face as the wood peeled off nicely. As advertised, my name was on the handle, which is a nice touch.

I also got a miniGlaser spindle roughing gouge. It got a quick touch on the sharpening wheel as well and then I rounded some purpleheart blanks in preparation for making icicles for sea urchin ornaments. I was extremely pleased with the test run and how the tool did not get dull quickly as can happen with purpleheart. Another excellent tool!

I noticed today that Glaser Hitec is now a Major Turning Advertiser on WoodCentral, so a note of this nature supporting a WoodCentral advertiser should be quite within bounds. Let's hope that this marks the beginning of a long and friendly association of Glaser Hitec and WoodCentral. Paulo Marin has done what we all thought was impossible a couple of years ago - Glaser Hitec is back and I think we all will benefit from their return. Congratulations Paulo!

Ed

Re: Glaser tools - have yours ...

#2

Mike Stafford

Re: Glaser tools - have yours ...

Mike Stafford

Ed, now that Paulo has your credit card number the company's financial success is assured..... :b :D

P.S. If I had Ed's money I would burn mine.... ;)

Re: Glaser tools - have yours ...

#3

Tool Envy at its best!   

Ed Moore in SW VA

Re: Glaser tools - have yours ...

#4

Nice gloat, but where are the pics?

David Walser

Without pictures it didn't happen!

Re: Glaser tools - have yours ...

#5

Is that a commentary on Osama ...

Ed Moore in SW VA

bin Laden's death?

I'm hustling to get ready for the class at John C Campbell Folk School. Come take the class and you may use the tools. I need to add two pictures to my notes on making an acorn birdhouse ornament, so I'll try to get SWMBO to take the picture with me holding the tools.

Ed

Re: Glaser tools - have yours ...

#6

SWMBO is not available so ...

Ed Moore in SW VA

we will have to forego seeing my smiling face. :D :D

The dining room table is probably prettier anyway. Here are the tools that I received yesterday from Glaser Hitec. They are the 1/2" (English) bedan and the miniGlaser SRG.

Ed


Re: Glaser tools - have yours ...

#7

Mike Stafford

Re: SWMBO is not available so ...

Mike Stafford

How many mini roughing gouges does one man need? :b

I just received, handled and used my new Thompson Mark St. Leger 5/8" spindle roughing gouge. I love it. I rounded up some bird house and roof blanks and enjoyed the size and performance.

Of course I had to make a handle first but I enjoy that as much as getting the new tool.

Have fun with your new tools!!!

Re: Glaser tools - have yours ...

#8

Cryogenic video-very interesting *LINK*

John Lucas

My client is late this morning so I scanned the glaser site and found the Discovery video on Cryogenics. That and the FAQ's below the video are well worth reading. Veddddy interesting. check it out.


http://www.glaserhitec.com/shop/shopping/

Re: Glaser tools - have yours ...

#9

Leo Cuellar

I think I see...

Leo Cuellar

some cryogenic micro tools in your future. LOL

Re: Glaser tools - have yours ...

#10

Re: Cryogenic video-very interesting

Barry

There is a nice article about Glaser-Hi-Tec in the June 2011 issue of Woodturning Design. I have one of the early 5/8" bowl gouges that I bought at the Louisville Symposium in 2007 that has proved to be completely satisfactory. I wish this company the best. It been a long time coming.

Re: Glaser tools - have yours ...

#11

I have access to Liquid Nitrogen-watch out

John Lucas

Re: Glaser tools - have yours ...

#12

Re: Cryogenic video-very interesting

Don at Central Illinois

There only a couple of miles from where I work. I may have to take a lunch hour and go visit, just to see them.

Re: Glaser tools - have yours ...

#13

Mike Stafford

I don't want to hear about your kinky stuff, John.

Mike Stafford