Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Wands for a neighbor

Posts

Wands for a neighbor

#1

Wands for a neighbor 

Mike Rubes, Apex, NC

Hi all,

A neighbor asked me to make her grandkids some Harry Potter type wands. I've made a bunch of these in the last year or so. They are a little labor intensive, about 1.5 hours total per wand, but I find them really fun to do. Finish is just a wax/shellac mix. I cannot remember the brand right now.

The one in the middle is ipe and is about 13 inches long.

From left to right, the woods are: Rosewood, dogwood, osage orange, ipe, birdseye maple, black palm and bloodwood.

Thanks for taking a look,

Mike

Casting a spell (I hope) in Apex, NC!!


Re: Wands for a neighbor

#2

Re: Wands for a neighbor

Toney Robertson

Mike,

I can see why they are so time consuming with all the bead work. I don't think I could do one that ornate in an 1 1/2!!!

One thing about it, I bet it is good practice with a skew. I could sure use that since the skew and I don't see eye to eye very often!!! :)

Re: Wands for a neighbor

#3

Re: Wands for a neighbor

Steve Criscenzo

Mike

Very nice work. I like the fact that each is a custom piece with its own character. Your neighbors a very lucky to have you as a friend.

Steve (Up the road in Durham)