Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Pheasant foot

Posts

Pheasant foot

#1

Ellis Walentine

Pheasant foot

Ellis Walentine

When I saw Mike Stafford's pheasantwood box here a few weeks ago, I really admired the grain of the wood. I was able to get a couple chunks of it and finally got around to turning a little vase yesterday. I really like the transitional wood between the sap and the heart.

My question is, what do you think of the little foot on this pot? I almost always carry the curve all the way around the bottom, with just the smallest flat for a base and no added foot, but this time I left a tiny vestige of a foot that you can really only see when you view it from eye level. I wonder if it's too much.

BTW, this pot is 2 1/4" high.

Ellis


Re: Pheasant foot

#2

Re: Pheasant foot

Dale Miner

There is so much 'Right' with this piece that one would really have to get a fine tooth comb to get any nits.

At the level of the smallest nits, I think your usual might have been a bit more pleasing to the eye.

Re: Pheasant foot

#3

Re: Pheasant foot

Cyril Griesbach

Ellis,

To foot or not to foot, that is the question. And as the answers tend to be highly subjective they are also usually split about equally both ways. Then we also know what is said about opinions so here is mine. While I'd say that this pot would look just fine without the foot I don't find this one the least objectionable. It's diameter and height are keeping with the overall dimensions of the pot...which is very nicely done also.

Re: Pheasant foot

#4

Aage Rendalen

Foot depends on viewing angle

Aage Rendalen

If the vase is to stand on a mantle, I'd take it off. If on a table, I'd keep it. It's a bit like crown molding, in my opinion, you alter the angle depending on where your eyes will hit it. Like you, I'm often conflicted about the foot. Great piece, though. I love the wood.

Re: Pheasant foot

#5

Don Leydens

Re: Foot depends on viewing angle

Don Leydens

Hi Ellis!

While the piece looks great the way it is, and you have such perfect and graceful lines going on here, I'd like to see the curve complete itself. Excellent work!

Re: Pheasant foot

#6

Re: Pheasant foot

Jennifer Indy.USA

Ellis that is a wonderfully voluptuous shape. I don't mind the little foot at all. It sort of acts as a subtle pedestal for the piece. Great piece of wood too. I've never heard of it before.

Jen

Re: Pheasant foot

#7

Re: Pheasant foot

Ed Moore in SW VA

Ellis,

I think the piece is excellent! Take a straight-edge and slide it up from below on the picture. I sort of liked it when it cut the bottom third off the foot.

Ed

Re: Pheasant foot

#8

Steve Kubien

Re: Pheasant foot

Steve Kubien

I am not firmly in either the foot or no-foot camp as a general rule. I think this piece is so fine that it works with the foot and likely would without as well.

Well done!

Re: Pheasant foot

#9

Mike Stafford

Re: Pheasant foot

Mike Stafford

Thank you for the comment about my box.

This is a lovely piece of wood Ellis and if you are like me it is a pleasure uncovering the beauty of its grain as you are turning. I think that is a great deal of the appeal to our hobby. We enjoy unwrapping nature's presents.

For what it's worth, I would like to have seen the bottom curve on your beautiful little vase carried to its completion which I believe would have left a little flat upon which the vase could sit that would still have displayed the curves at the bottom and given the same lift as the foot without being as conspicuous. A little concavity in the flat would help provide stability and provide a space for the maker's mark.

Don't you just love looking at pheasantwood. My wife has kept every piece I have turned.

Re: Pheasant foot

#10

Barb Siddiqui

Re: Pheasant foot

Barb Siddiqui

I think it 'presents' the vase. I like it a lot. Beautiful curvature.

Re: Pheasant foot

#11

Re: Pheasant foot

dick gerard

Ellis,

Feet are always contentious things, but ... where would we be without them? A species of stumpies? I nearly always trust the artist and his judgement when it comes to feet. As long as the feet compliment rather than distract from the main subject.

Re: Pheasant foot

#12

ebd

Re: Pheasant foot

ebd

The diameter of the foot is (as far as I can tell) identical to the diameter of the lip. I wouldn't change a thing. Certainly woldn't make the foot smaller than the lip.

Re: Pheasant foot

#13

Re: Pheasant foot

bob davis

ellis ithink feet usually are the way. beautiful job. i probably would have reduced the size about 1/3 and depth also. i think rounding with no foot would be wrong

Re: Pheasant foot

#14

Ellis Walentine

Thanks, all

Ellis Walentine

Seems like the jury is divided, as am I. When viewed from above, you can't see the foot, so it doesn't matter From head-on, it is a mixed blessing visually for me. I guess I'll have to make another one without the foot and see if I prefer one over the other.

Thank you for your insights.

Ellis

Re: Pheasant foot

#15

Re: Pheasant foot

Terry Scott

Looks fine but then I would have added three nipple like feet

Re: Pheasant foot

#16

Re: Pheasant foot

Mike Rubes, Apex, NC

Hi Ellis,

I really like this piece a lot. Just by looking at it you cannot tell if it is 2 inches tall or 20 inches tall. To me, that means the shape is spot on. I have to admit, though, that I think I would have preferred it without the pedestal foot, but it is still a wonderful piece. I like that wood a lot.

Thanks,

Mike

Busy, busy weekend in Apex, NC!

Re: Pheasant foot

#17

Re: Pheasant foot

ronnyeelen

It is good to try something else once in a while. Even if only to find out that the other way was better, or not.

Maybe put it upside down, and think about what you would do when it was the lip of the vessel.