Bought these at NJWoodturners tool swap last night
steven antonucci
1.5" wide x 5/16" thick x 7" long WITH A HANDLE
2 for $11...
S
I'll spend a few minutes doing a tune-up video if folks are interested...
Knowledge You Can Build On — Est. 1998
Bought these at NJWoodturners tool swap last night
steven antonucci
1.5" wide x 5/16" thick x 7" long WITH A HANDLE
2 for $11...
S
I'll spend a few minutes doing a tune-up video if folks are interested...
You lucky dog!
Leo Cuellar
What a great deal you got, Steve. I'm going to have to start grinding some more of the blanks I cut out of the leaf springs last fall
Want To Double Your Money?
George Guadiane
Almost bought both sets...;)
steven antonucci
with that in mind...
S
There Were 2 SETS (and you DIDN'T buy them both)??
George Guadiane
Other set went for $13...who has that kind of $$$?
steven antonucci
Re: Bought these at NJWoodturners tool swap last n
Alan Zenreich
Nice score
Re: There Were 2 SETS (and you DIDN'T buy them bot
Brian McInturff
Those aren't HSS are they? I have a couple like that which are carbon steel I think.
Look like carbon steel...
steven antonucci
I'm going to spend some time polishing one up and see how it works. In the end, you trade edge sharpness for longevity so as long as you manage the edge, it should be a good tool.
S
Re: Look like carbon steel...
brian.mcinturff
One of mine is almost 2" wide. I've never done anything with them. Let me know how yours turns out. You got a great deal that's for sure.
Definitely Carbon Steel
George Guadiane
I have several of them, including a 3 inch wide skew turned negative edge scraper turned scraper. These big boys have ended up as my go too scrapers as often as they will fit.
At those prices, I would have bought a 20 lifetime supply.
If, after you use them for a week/month or two, you don't LOVE them, my offer stands. 
First impressions
steven antonucci
I did a quick and dirty sharpen of one of them and my first impression is that they engage an awful lot of edge at one time. I need to play with them for a bit, but I might just consider your offer some day.
Or I could forge them into Bowie knives? 
S
Try This
George Guadiane
Add a slight curve (SLIGHT) on the straight one. I use mine like that so I can slide and body rotate at the same time. I find the tools, used like that really give me a fairly easy long bump free line.