Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Carved Walnut bowl

Posts

Carved Walnut bowl

#1

Carved Walnut bowl

John Lucas

I saw a plastic ashtray this weekend and liked the way the feet were in contrast to the texture in the body so I tried to sort of copy the affect. I should have used Terry's glue stick because the curve of the left and right side where the carving meets the turned portion are slightly different. The glue stick would have told me there was something wrong.

Don't know if I want to do another one of these. I have about 2 hours in the texturing. I had to stop every half hour because my hands were going numb. Carpal tunnel I guess.

Re: Carved Walnut bowl

#2

Leo Cuellar

I LIKE!

Leo Cuellar

Pretty nifty little bowl, John. Nice the way you did the "drips" on the inner edge. Very nice to see someone contributing something more appropriate to the forum this afternoon. :D :O :D

Re: Carved Walnut bowl

#3

Amen brother, Amen!!

Dick Wilson

Re: Carved Walnut bowl

#4

Re: Carved Walnut bowl

Dick Wilson

John, Beautiful bowl. Curious, what did you use to get the dimples?

Re: Carved Walnut bowl

#5

Re: Carved Walnut bowl

Joe Herrmann

Very nice job John--I like the texturing and the shape of the bowl with the handles. Jury's still out on the feet though--have to look at them a bit more.

Re: Carved Walnut bowl

#6

Re: Carved Walnut bowl

john lucas

The next to the smallest round Dremel bit. There's 3, 632 dimples. No just kidding. I started to write that because all the segmented guys always put down how many parts there are. It took about 2 hours and I had to stop every half hour to let my hands rest. It's the same texture some people do with pyrography but of course it doesn't change the color of the wood.

Re: Carved Walnut bowl

#7

Re: Carved Walnut bowl

john lucas

Joe I had 3 designs in mind for the feet. I picked the worst of the 3 I think. I don't know, #2 may or may not be good. I looked at making 2 long feet, like it was sitting on 2 boards edgewise. That was the initial idea but I took the wood down too far to make the "boards" stick out properly.

I went to phase 2 which was an other alternative. Not sure I like it unless I shape them more like some sort of furniture leg. #3 is the same sort of feet but set 90 degrees to each other like lines on a clock. That would be the easiest of the 3 to produce because you can turn all but space between the feet. These and long board feet would require considerably more carving.

The other alternative which I've done before is to cut slots in the bottom of the bowl and put contrasting wood in the slots.

Re: Carved Walnut bowl

#8

Very nice, but please...

Craig Daymon

...help it back up!

For some reason, it reminds me of a turtle stuck on its back.

I like the dimpling, especially on the inside. It appears to follow grain lines, is that correct?

Also, why did you choose to make handles rather than turn them as a wide rim and carve away? (Or does it just look like different pieces of wood?)

I like it, and the feet. The only thing I would consider for the feet would be to make them more wedge like, bottoms of the feet thicker, like often found on Asian furniture.

-Craig

Re: Carved Walnut bowl

#9

Re: Very nice, but please...

john lucas

Craig I did turn a rim and then carve it away. It was handy. I screwed through the waste areas of the wide rim and put it on a big wooden faceplate. That made it easy to hold it to carve the feet.

Re: Carved Walnut bowl

#10

another footed bowl.

john lucas

Here is one of the bowls I've done with the routed grooves and feet.

Re: Carved Walnut bowl

#11

Katherine Kowalski

Re: Carved Walnut bowl

Katherine Kowalski

Hi John,

I, personally, like the feet -- they give an oriental feel to the look of the piece. They're also very different from what is generally seen in woodturning, (which is a good thing!!!)

In my thoughts, the inside might have been better left untextured, or perhaps a change of color -- (ebonized, perhaps?), instead of the "drops" -- they don't "make sense" visually as a whole of the work. (Where is the "liquid" coming from? What is dripping? The texture itself looks more sandy than anything liquid that would form a viscous drip. --- Just my thoughts, BTW).

The handles are well done... but I think they might accent the piece better if they were along the same theme as the feet -- thinking a straight outer edge instead of a round one -- but I do like the way you've rounded the corners.

Lovely piece -- very architectural, yet at the same time, has a feeling of ceremonial utility. Nice.

Katherine

Re: Carved Walnut bowl

#12

Re: Carved Walnut bowl

john lucas

Katherine Not being one to do anything like anyone else as I was doing the texturing I though it should spill over into the inside, instead of the other way around. The opposite is what you would expect, but why be normal. :) Maybe I'm just a sloppy painter and if I painted the outside it would spill over to the inside.

Re: Carved Walnut bowl

#13

Katherine Kowalski

Re: Carved Walnut bowl

Katherine Kowalski

Ahhhh.... sloppy painter, huh? :D And here I thought you might have been "dunking" the bowl to test displacement.... :b

Katherine

Re: Carved Walnut bowl

#14

Re: Carved Walnut bowl

John Jordan

I like the feet, and the bowl. Shouldn't it have little notches in the edge to hold your butts? :)

John

Re: Carved Walnut bowl

#15

One big notch-I'm going after the cigar people

john lucas

Re: Carved Walnut bowl

#16

Don Leydens

Re: One big notch-I'm going after the cigar people

Don Leydens

A warm and friendly piece, John. I love the inside texturing.

Re: Carved Walnut bowl

#17

Re: Carved Walnut bowl

Jennifer Indy.USA

John, I like this bowl. I agree with Terry, I think it has some attitude. It sort of reminds me of one of those M&M guys.

Nice job.

Jen

Re: Carved Walnut bowl

#18

WOWwwhh!

George Guadiane

That was my first response to this, even before the whole picture loaded.

Don't know why exactly, but I REALLY like this.