Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Craft Supplies salt & pepper mill question

Posts

Craft Supplies salt & pepper mill question

#1

Craft Supplies salt & pepper mill question

Galen Vetterick

I ordered salt and pepper mill kits from Craft Supplies for my first such turnings.

I ordered the Deluxe model in both 6" and 8". (Not sure what is Deluxe about them yet.)

Neither instruction sheet says anything about a bent shaft!

The shaft taped labels were on the units as shown.

The two center shafts are bent but the long is marked "S" and the short bent is Marked "P"???? Add to this the two marked "P" have shiny threads and the two marked "S" have a more uniform anodized look and dull threads.

I think the material is really the same aluminum for all four.

Can anyone tell if the bent shafts are maybe for the pepper mills and straight for salt?

Is the thread and surface appearance just random or indication of slight material differnces for salt and pepper?

Have sent an email to Craft Supplies but due to holiday don't expect an answer soon.


Re: Craft Supplies salt & pepper mill question

#2

Jerry Louden

Re: Craft Supplies salt & pepper mill question

Jerry Louden

The shafts should be straight on both the salt and pepper grinders. Craft supply should replace them. Use their 800 number and talk to a real person. I think you will get faster service and satisfaction. Good luck.

Jerry

Re: Craft Supplies salt & pepper mill question

#3

Thanks Jerry for answer.

Galen Vetterick

I'll call them and see if they will make it right on Monday.

The way they were packaged I could not see how they could have been bent in shipping. You can overlay the parts and the bends where identical.

Someone must have overlooked when shipping bad parts.

Just my luck!

Re: Craft Supplies salt & pepper mill question

#4

Craft Supplies & messed up products.

Jennifer Indy.USA

I have recently ordered a number of items from CS and found that they arrive damaged from a lack of proper packaging. A year or so ago I sent back some of the flower frogs ( fresh flower pins) that were shipped just loose in a box way oversized for the 15 or so I had ordered. They are made of a soft aluminum I think. They clinked and clanked all the way from Utah to Indy and arrived so dinged up that I couldn't present them in a finished turning. I've talked to several people on the phone about their lack of proper packaging and how it must be costing them a fortune in returns and damaged products. when I got the replacement order they had taped all of them securely together and wrapped them in paper so they didn't bang around in shipping. They arrived undamaged. This last order was 15 pizza cutters that I ordered for a recent class project. Many of them arrived with dings in the cutting disc and I couldn't expect students to pay for these as part of their materials fees. I was glad I had extras so nobody had to use a dinged up one. What's it going to take to get them to realize that they need to address their packing crew? I guess not buying from them?

These bent pepper mill shafts of yours are just ridiculous. I would send a picture to one of the higher ups there. I think I'll do the same with these pizza cutters.

Harrumph!

:(

Re: Craft Supplies salt & pepper mill question

#5

Re: Craft Supplies & messed up products.

Fred Bearman

Chronic problem - I've complained, they agree it shouldn't be that way, and the next shipment arrives looking like it was filled by people throwing stuff from the other side of the room, with some making it into the box and others missing the trip.

Re: Craft Supplies salt & pepper mill question

#6

Re: Craft Supplies & messed up products.

Mac Ray

Same problem here......I " used" to buy from them..........

Re: Craft Supplies salt & pepper mill question

#7

Re: Craft Supplies salt & pepper mill question

Barry

I have never seen any peppermill shafts that were bent. At least, not on purpose. Find yourself a known flat surface like a saw table and use a ball peen hammer to straighten them yourself. You could always return the items to Craft Supplies if you want a 30 minute job to take a week or so.

Re: Craft Supplies salt & pepper mill question

#8

Jim in Burlington Ont.

(Message Deleted by Poster)

Jim in River Oaks, Ont.

Re: Craft Supplies salt & pepper mill question

#9

Re: Things Got Worse... So I Walked

mjonesrdg

A bag of aniline dye that was not closed. A turned hat from a Jimmy Clewes class stuffed into a box with other purchases...broken rim. In the case of CSUSA, I think the apple fell far from the tree.

Re: Craft Supplies salt & pepper mill question

#10

Re: Craft Supplies salt & pepper mill question

Rich Egan

Galen:

The salt and pepper mechanicals are made of different materials because of the corrosive properties of the salt. The shafts should not be bent. The Deluxe mechanisms are of good quality and go together well. I have tried the artisan mills, but was not as satisfied with them. You can purchase the deluxe kits from Packard as well as CSUSA.

Rich

Re: Craft Supplies salt & pepper mill question

#11

Craft Supplies follow up

Galen Vetterick

Angie from Craft Supplies called me first thing this AM about the order.

I advised I did not think the two shafts were damaged in shipment as they were secured along a solid wood turning block and no damage to exterior of the package.

She said she would have their QC look at the bin of parts. She said she was very sorry and would send new shafts out today.

She said the shafts were marked correct as the salt mill shafts are anodized after the threads are cut to coat all areas compared to the plain pepper mill shafts. This agreed with my observations of the parts.

As slow as I am I'll not need the shafts for a while and can use the straight shafts for dimensional checks.

Barry suggested straightening the parts but they are bent in two axis and with the spring of the alloy I'd just guess at how much to overbreak or even peen out. Would destroy the anodized coating as it is already cracked on the one. Not worth the time if they will replace and hopefully not send out defective parts to others.

The part I kick myself on is our club placed and recieved a group order for over $2000 of supplies from them and I did not have these items on the list. I missed a discount and free shipping for not planning well!!! Getting old and forgetful.

Re: Craft Supplies salt & pepper mill question

#12

Re: Craft Supplies salt & pepper mill question

Darrel Nish

Galen,

I thought I would shed some light on your questions. I understand that you contacted our Customer Service Representative who has replacements on the way. I appreciate your bringing this problem to our attention. You're welcome to contact me direct at any time.

1. Deluxe vs Standard- The difference between the two that is most notable is the design of the grinding mechanism at the base of the shaft. The teeth, sharp or fine and the feed slots normally determine how well the mill performs and as such, are the difference in mills for the most part.

2. Pepper Mill and Salt Mill Shafts- Although there are a number of materials used for shafts, aluminum is quickly becoming the choice of commercial pepper mill manufacturers as it resists corrosion from both salt and pepper over time and aren't subject to "flaking" as is common to plated shafts. Stainless steel is good too but is more expensive with no added benefit. Again, aluminum shafts work with all mills.

3. Customer Service- No, we don't supply bent shafts on peppermills as you know. Never will we supply a product to a customer that we know is defective. Bent? No doubt it left here straight but was modified by the 30 foot box kick to the front of the transport trailer that so many in the freight business do. Our number one priority is to make sure our customers are delighted with our service and product, period. If you have an issue, just give us a call or email us and we'll make it right every time.

To Forum Members- I want to share my personal opinion regarding negative forum comments-

There was a time, not long ago when the decent thing to do if you had a problem was to contact the person directly in an effort to resolve the situation. Things have changed, I guess I'm just getting older. It's a shame to see great forums like this so regularly used as a soap box used to criticize and disparage others with impunity. All to often, comments are made, knowingly or otherwise that are false and mean spirited with no thought as to the long term ramifications. As everyone knows, right or wrong, true or false, comments made on forums are there for good and never go away. Nothing can be "taken back" by the person who wrote it. The harm is done regardless of the outcome and will always be on display. People get hurt.

Here is my suggestion to everyone on the forum. Everyone deserves the opportunity to resolve issues directly with one another before being subjected to disparaging remarks. It's a civil, respectful way of resolving issues that seems to be largely forgotten in our society today. No doubt, there will be some who take me to task for my thoughts. So be it. It's the internet we live in today isn't it? Respect and civility seem to be a rarity in our society. It's a shame.

Everyone at Wood Central, you're doing a great job, keep it up!

Re: Craft Supplies salt & pepper mill question

#13

Craft Supplies USA to evaluate packing

Darrel Nish

My apologies for not finishing my thoughts in the last post. I appreciate the comments from everyone as it suggests that we need to evaluate our packing methods and materials more closely. From what I read, it is clear that better packing on fragile and plated items is the first order of business. Thanks again everyone, praise is nice but criticism is very helpful indeed as it brings issues to our attention.

Re: Craft Supplies salt & pepper mill question

#14

Leo Cuellar

My experience with CS has been good.

Leo Cuellar

Darrel, thank you for responding to this publicly. I have been ordering from your company since last December. I have to say that I have never had a bad shipment from you folks. Everything has been there and appropriately packed. I for one appreciate the many shipping discounts and specials that you continue to offer to us.

Thanks again!

Leo Cuellar

Re: Craft Supplies salt & pepper mill question

#15

My Experience With Craft Supplies..

Wally Dickerman in Arizona

has been nothing but good. I have been buying from Craft Supplies for over 25 years and if I've ever had a problem it has alway been resolved to my complete satisfaction.

Re: Craft Supplies salt & pepper mill question

#16

Katherine Kowalski

Re: Craft Supplies USA to evaluate packing

Katherine Kowalski

I have to completely agree with Wally -- my experience with Craft Supplies has been nothing but pleasant and productive. As in any business, sometimes there are defects in supplied products that are not readily visible until assembled. CS has always resolved any difficulties with ease. (And everything I've received from CS has been well-packed, nothing broken... ???)

Katherine

Re: Craft Supplies salt & pepper mill question

#17

Darrell, It would be nice for you if...

mjonesrdg

...if none of CSUSA's problems were ever exposed to your customer base. In my own case however, CSUSA did not even bother to respond to either of two letters that I had addressed to Darrell Nish, so, as a former customer, I have migrated to your competition as my first go-to resources.

I am far removed from your day-to-day operations and don't really know, but it seems that CSUSA was run by Dale Nish in a more professional, knowledgeable, and caring manner than it is under current management.

Times have changed....it's true. I don't see civility, however, as being diminished. And I feel that my "loyalty' to my fellow forum correspondents will prompt me in the future to continue to point up the shortcomings of suppliers as I see them. If you get caught in the crosshairs, don't take it personally.

Times have changed.

Re: Craft Supplies salt & pepper mill question

#18

Darrel,  I must say .....

Barry Irby

that I take issue with your response. I went back and reread the original post. It appeared to me to be a question to Fellow Members of WoodCentral wanting to know if the shafts were supposed to be bent or if they could be used in this condition. He stated this was his first attempt at salt and pepper mills and that he had contacted your company for answers but because of the holiday he did not expect an answer before the weekend. He seemed to think he could reliable advice form Wood Central faster than from the supplier, and he did. There was little negative in the post except a picture of what he received.

I read the other responses and don't remember any of them appearing to be made up or mean spirited.

What I like about Wood Central is that the people here are extremely polite and generally don't tolerate foul language or ill mannered posts. And you are right about stuff staying on the 'net forever. I'm not sure, but if you give it a good search I think you find more positive posts than negative ones. I am amazed at the number of people that take the time to posts messages that start out Kudos to .... or some such thing. The reason it is amazing is that often the company gets Kudos for doing something like delivering exactly what the customer expected, at the price agreed, promptly. Oh! Wait!, that what they are expected to do. Times have let things slip and companies get kudos for doing what is expected.

Thanks for sending replacements promptly and making things right.

Re: Craft Supplies salt & pepper mill question

#19

Re: Craft Supplies salt & pepper mill question

Jerry Klug

I am goin to wade in and add my $0.02 worth.

As the "point man" for a number of large (by individuall standards) orders for our club to CSUSA, I have worked with Darrell's staff a few times. Typically they were for mis numbered items and an occasional shipping damaged item. Darrell's staff were courteous, helpful and prompt at resolving an issue. I have only been turning a few years so I cannot say what happened back in the day but, I can attest that Darrell is very hands on where it comes to seeing that his customers are well served.

I can also list a couple of his competitors that never answer either written or e-mail requests. Not Packard by the way. These other firms may be trying to be good suppliers too. I only mention that even the best firms may have things fall through the cracks.

Re: Craft Supplies salt & pepper mill question

#20

Re: Darrel,  I must say .....

David Walser

I read the other responses and don't remember any of them appearing to be made up or mean spirited.

Barry,

While none of the responses may have been intentionally mean spirited, try to imagine how some of the comments might come across to you if they were about your business. The original poster asked a question about some parts. Rather than merely state the parts were defective and that he should contact CSUSA for replacements, some used his question as an opportunity to publicly dump on CSUSA. Some of the comments effectively said we shouldn't do business with CSUSA. Mean spirited or not, such comments would have to leave a mark! Can't we cut Darrel a little slack when he laments that he'd have preferred to have been given a chance to address any concerns directly rather than reading about his company's dirty laundry in a public forum?

Not that anyone was intending to give bad advice. Nor that it's wrong or improper for forum members to provide honest views about how various companies perform. Both turners and companies can benefit from such insights. (Darrel, in his follow up post, says CSUSA will review the way it packages items for shipment. So, this thread should lead to a better CSUSA.)

While truthful, yet negative, comments can help the community at large, that doesn't mean we shouldn't be careful when making such comments. I've had a handful of bad experiences with a particular vendor and will not do business with that company again. The most recent of those experiences were over five years ago. Sharing my bad experiences on a forum such as this would undoubtedly harm the company in question, yet a bad experience from years ago may provide little if any useful information about how the company is currently performing. Knowing that negative comments will harm a company, shouldn't we resist making such comments unless we are reasonably sure our experiences are still a valid indicator of a firm's behavior?

Re: Craft Supplies salt & pepper mill question

#21

You are correct....

Barry Irby

Perhaps I over reached. I have no experience dealing with this company so I can not comment on it from personal experience.

When I first started to hear about the Innocence Project where they were using "primarily" DNA evidence to get people off death row. I thought it was interesting but only mildly alarming that they found one among the many who had been wrongly convicted. Mistakes happen and those were probably some pretty bad people anyway. When it got up to about 130 I had to rethink. Somehow a fair system Does not make that many mistakes.

I have shipped thousands of packages in my business and never had one kicked to the front or sent back for being damaged. When I see as many people (above) willing to post about damaged packages I have to wonder about the packaging.

But it would have been better if the situation had been handled without WoodCentral being informed. Perhaps the OP could have left the company's name out of the post and still gotten the help he needed. But then you have to wonder if the company would have reviewed and hopefully improved their packaging which will benefit Wood Central customers and conversely the company. A little feed back is a good thing but sometimes it might take a big dose of it.

My point was that I felt that Darrel bad mouthed Wood Central. Tried to point that out.

Re: Craft Supplies salt & pepper mill question

#22

How can we NOT notice? No CSUSA support for WC!

mjonesrdg

Re: Craft Supplies salt & pepper mill question

#23

Rob Wallace

We've had Years of Excellent Service & savings....

Rob Wallace

......with Craft Supplies USA.

I have personally placed two group orders per year for the past 6.5 years for our woodturning club, and we have never had a problem with our orders - and these are usually LARGE orders! They fulfill back-ordered items promptly, and follow-up as needed to correct inaccurate numbers we submitted when placing our order, to verify quantities, or to confirm specific style or color choices if these are available under the same catalog number. The clearly do want to get it right!

We have placed orders for thousands of dollars of woodturning tools and supplies and over the past few years, and have collectively (and individually) benefited from the group discount Craft Supplies offers. (To my knowledge, relatively few other woodturning vendors make similar group discounts available.) My phone conversations with Kristen (who now handles group orders) at Craft Supplies USA for the past 6 or 7 orders I have placed have been nothing but cordial, helpful, and efficient. I generally receive our orders within 5 to 7 days of placing them. For me it is like a "Woodturner's Christmas Morning" every time I receive a group order, and have turning tools and supplies spread all over my living room as I sort the items for each member. The last 12 orders that I have placed have been checked, packed, and shipped well, in my opinion.

While there will be some who do not choose to do business with a company after one bad experience; in MY experience I find Craft Supplies USA a very good company to work with, and have at least a decade of cumulative experience of being a satisfied customer, as both a individual customer and through our past group orders. Our members do really appreciate the group order discount, as well as the support Craft Supplies provides to the woodturning community in general through various AAW sponsorhips and advertising.

While it is helpful to know about all kinds of experiences and problems individuals have had, I hope that people will read and consider information from those who may have had positive experiences as well as those who report on negative ones.

Rob Wallace, President

Ames Area Woodturners

Re: Craft Supplies salt & pepper mill question

#24

I apologize for the original post

Galen Vetterick

I thought Jerry had answered my post right off. The shafts should be straight.

I used CS name as I truely did not know if other suppliers provided the same kit, so thought it may be needed to clarify who's kit the shafts were from. What little I knew the bent shafts could have been to provide an eccentric movement to the type of mill. CS call came the first thing on Monday after the holiday and therefore a quick responce to my late Saturday email to them. The responce by them was friendly and seemed like a concern for the problem. I have since gotten a confirming shipment notice that the parts are on the way. Not sure I could have expected more for a problem on a holiday weekend.

I had no intention to cause such a stir but the damage is done and I apologize to all, especially CS.

Re: Craft Supplies salt & pepper mill question

#25

Steve Kubien

Re: I apologize for the original post

Steve Kubien

You have nothing to apologize for Galen. You asked a question, a fair question and away we went....