Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Poly Ethylene Glycol (PEG)

Posts

Poly Ethylene Glycol (PEG)

#1

Poly Ethylene Glycol (PEG)

Scott W

Has anyone done any experiments with pharmacuetical Glycol? It's used as a laxitive but if I can scoop some out of the large bottle my wife has...

Also, call it a brain scramble from an old turner but has anyone also tried a dilute solution with unflavored Knox Gelatine?

Re: Poly Ethylene Glycol (PEG)

#2

Re: Poly Ethylene Glycol (PEG)

Joe Herrmann

I played with it at school over 20 years ago. I found the process to be extremely messy and somewhat expensive back them. I don't know what the cost would be in today's $$$. I soon gave up on the process because of the mess. Also, you are limited in the types of finishes you can use after drying. There are much easier methods available today with none of the drawbacks associated with PEG and I would recommend you explore those instead.

Re: Poly Ethylene Glycol (PEG)

#3

Re: Poly Ethylene Glycol (PEG)

Don Orr

All I know is that it works great as a prep for a colonoscopy. :b

I believe the Moulthrops used it quite a bit in the early days of their large turnings in green wood. As Joe said-finishes are limited-to waxes I believe.

Re: Poly Ethylene Glycol (PEG)

#4

(PEG) 1000 weight is hard as paraffin.

Keith Newton----Little Rock, Arkansas

If you experiment with something softer, it would probably always be soft. I don't think I would bother.

Re: Poly Ethylene Glycol (PEG)

#5

The Moulthrops encased....

JamieDonaldson

...their PEG cured pieces in a thick coating of epoxy for a finish.

Re: Poly Ethylene Glycol (PEG)

#6

Re: Poly Ethylene Glycol (PEG)

jim miles - Charlotte

PEG is also a primary ingredient of antifreeze.

Would be concerned about it being toxic ?

Re: Poly Ethylene Glycol (PEG)

#7

Ken Vaughan

Re: Poly Ethylene Glycol (PEG)

Ken Vaughan

There are a lot of "glycols" out there --

and ethylene glycol in antifreeze ain't the stuff that was used to treat green wood (PEG)

PEG is a waxy feeling solid that is water soluable and when the water dries fills the cells -- it leaves a waxy feeling residue. Few finishes will stick to it and it was messy to use.

Re: Poly Ethylene Glycol (PEG)

#8

Poly Ethylene Glycol (PEG)

Scott W

Thanks all... and Joe, Thanks for reminding me about the colonoscopy! AARGH!

I'm going to my "happy place" now :D

Re: Poly Ethylene Glycol (PEG)

#9

Thanks Jamie...

Don Orr

... I couldn't remember what exactly they used.

Re: Poly Ethylene Glycol (PEG)

#10

Re: Poly Ethylene Glycol (PEG)

Joe Herrmann

Steve: I can't take credit for the colonoscopy--that was Don!!! ;-)

Re: Poly Ethylene Glycol (PEG)

#11

Re: Poly Ethylene Glycol (PEG)

bill Crommett

I have a three legged stool with a 12+ in. diameter section of an Oak log as a seat. It was soaked in PEG (the log section) about 25 years ago and has never shown tendency to crack. It has a gentle low luster sheen and is quite comfortable as a stool. Well, as comfortable as a hard piece of Oak can be.

Re: Poly Ethylene Glycol (PEG)

#12

Steven Antonucci

And over time, it can delaminate...

steven antonucci

There were two Moulthrop pieces in the lobby of an insurance customer I used to work with. Both had issues with the epoxy flaking off around the openings.

PEG is a smelly slimy mess. The few pieces I made that had been soaked in it always smelled like the PEG was still wet, even after years of being inside the house. Eventually burned them (early pieces, not very good...)

S