Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Woodturning Design - Great News!

Posts

Woodturning Design - Great News!

#1

Woodturning Design - Great News!

Ed Moore in SW VA

I just received my new copy of WD and it contained a nice article about the re-emergence of Paulo Marin's Glaser Hitec tools. My interpretation of the events between 2005 in Louisville and today is that Paulo took a few steps back in order to take several steps forward and do it right this time. Due to an unlikely sequence of events, I had the pleasure of chatting with Paulo several times about the production of the tools and things he hoped to do to help others. I sensed that Paulo is a very generous person who was taken advantage of by some. Let's forget the past.

As somewhat of a tool junkie who likes Thompson and D-Way tools, I am delighted to learn that things are back on track for Paulo to produce the tools that he has wanted to have available to us for some time. I wish Paulo all the luck and success possible as he opens this door and a new chapter begins.

Ed

Re: Woodturning Design - Great News!

#2

Re: Woodturning Design - Great News!

Chuck Engstrom

Hi Ed and all--

If anyone here has a child in biz school, this whole story, from Jerry's beginnings on to this latest development, might make a good thesis project. There are plenty of facts out there, along with plenty of opinions (I'll be glad to share mine) and surely numerous lessons to be learned.

--Chuck

Re: Woodturning Design - Great News!

#3

Steven Antonucci

And the world went "meh?"

steven antonucci

I tried to look up his website, but I couldn't find it with Google. In fact, the stuff that I found wasn't very flattering.

I don't wish the guy any harm, but with folks like Doug Thompson around, I don't see any reason to give him a call.

Steve

Re: Woodturning Design - Great News!

#4

Rob Wallace

Re: Woodturning Design - Great News!

Rob Wallace

Interesting report Ed!

The proof will be in the delivery of tools in a reliable manner to various vendors who may be willing to carry the CET Tool line.

I also have spoken to Paulo several times over the years since the Louisville AAW Sympoisium when CET had a "blow-out" show of their new tool line. Quite unfortunately, the promised product and subsequent lack thereof in any form has left a bad situation worse. Trust in this tool supplier has been compromised, particularly with the vendors who previously carried Glaser tools.

I agree that Paulo is a nice guy that means well and is sincerely interested in woodturning (he called me one Sunday morning and we talked for over an hour about different aspects of woodturning, tools and tool design, etc., along with discussion about another hobby we share - homebrewing beer!). There have been so many unfulfilled promises about resurrection of Glaser tools from "extinction" that I am very skeptical at this point, but I would like to see Paulo able to covert his desires into reality, and bring back some of Jerry's tool line.

If a RELIABLE and HIGH QUALITY source of turning tools of a Glaser provenance re-enters the market that would be great, however as they say in Missouri, "You'll have to show me..." that this has really happened, and that we can trust CET to become a continuing and reliable provider of the tools they intend to offer. Convincing vendors that this is worth a gamble to carry the CET line of tools will be a formidable challenge, given recent history.

I will wait to see my copy of Woodturning Design and read about this, but as I said, the proof will be seeing tools come to market to compete with established high-quality turning tools like those made by Doug Thompson. Getting back into the market will really be a tough row to hoe.

Rob Wallace

Re: Woodturning Design - Great News!

#5

It is my nature to wish people well ...

Ed Moore in SW VA

unless they have kicked me in the shins. I have the highest regard for Doug Thompson and Dave Schweitzer of Thompson Tools and D-Way Tools respectively. They both produce excellent tools and I have recommended their tools to others. I take Thompson 1/4" detail gouges to JCCFS for the students to use and/or purchase when I teach Ornaments there.

I regard Jerry Glaser as a National Treasure for developing and producing the tools that he did and would like to see tools using his steel produced again. I hope that other turners share a similar positive interest in the return of Jerry's tools.

Were mistakes made previously in this endeavor? Almost certainly. But who is helped by wallowing in that mess again? Absolutely no one! Let's simply look forward to enjoying Glaser-type tools again. And both Doug and Dave are smart enough to know that my extending good wishes to Paulo in no way diminishes my respect for them nor my hope for their success as well.

There's nothing like a bout with bladder cancer to help one realize what matters, and what doesn't. Folks have wished me well (even some who I know do not like me), and I intend to do the same to others.

Ed

Re: Woodturning Design - Great News!

#6

Re: It is my nature to wish people well ...

Sean Troy

Another line soon. Maybe we are in the begining of a tool revolution. http://vimeo.com/woodturning/teaser

Re: Woodturning Design - Great News!

#7

Dick Hines

Re: It is my nature to wish people well ...

Dick Hines

It's strange how the "C" word will change you thinking, isn't it Ed. I had a bout 36 years ago and have be living by the George Carlin saying ever since.

"Don't sweat the petty stuff and don't pet the sweat stuff."

Re: Woodturning Design - Great News!

#8

Re: Woodturning Design - Great News!

Joe Herrmann

I'm glad that this thread is seeing some activity. When I visited Paulo's operation this past Fall, I was impressed with the facility and all the tools that were being made. When you see folks from the different woodturning clubs in the immediate area working for free to assemble tools, there must be some higher level of commitment from everyone concerned. Paulo was truly appreciative of the second chance Glaser tools has been given and I believe he will be able to fulfill his commitments this time. I'm probably as big of a "doubting Thomas" as the next guy and I'm not really that gullible but I think that this is the real deal and would be the first to say otherwise if I didn't think it was true.