Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

JET new Vortex Cone Dust Collector

Posts

JET new Vortex Cone Dust Collector

#1

JET new Vortex Cone Dust Collector 

Larry Bisbee

Popular Woodworking Magazine has an article on there web site (http://www.popularwoodworking.com/tools/jets-vortex-dust-collector) about Jet's new Vortex Cone Dust Collector DC-1100VX. A cone shaped object suspended in the housing of the collector could improve dust collection by keeping larger particles from climbing into the canister filter of the collector thus clogging air flow.

Received an Email today from Monique Murray (Monique.Murray@waltermeier.com), Consumer Relations/Vise Tech at Walter Meier Inc. and was informed that Jet has no plans to market a Vortex retrofit kit for the DC-1100 or plans to sell the cone assembly parts. Those of us that own a Jet DC-1100 and purchased the retro Canister Kit will not be able to add the new Vortex Cone.

I'm always looking for improvements to my dust collection system in my shop when turning.


img

Re: JET new Vortex Cone Dust Collector

#2

Re: JET new Vortex Cone Dust Collector

John Lucas

I'm not sure I understand what it does. I read the blurb in the magazine. Is it supposed to keep the upper filter cleaner? It would be very easy to build of wood and not too hard to build out of metal.

Re: JET new Vortex Cone Dust Collector

#3

Re: JET new Vortex Cone Dust Collector  *LINK*

wilbur

It is supposed to keep the upper filter cleaner, which should help the dust collector move more air as the filter won't be clogged as much with fine dust particles.

It is also easy to build a similar type of device from wood. This site will tell you all you need to know. Despite the initial application for an improved trashcan cyclone, you can add this to a dust collector.


Thien dust baffle

Re: JET new Vortex Cone Dust Collector

#4

Re: JET new Vortex Cone Dust Collector

John Lucas

I have one of the trash can dust collectors. It sucks. Well it does keep me from having to empty the dust collector bag as often which is why I bought it. however cuts down on the volume of air being pulled into the hose tremendously. I think I'm going to pull it out of the line and just go back to the collector. I may build an easily removable bottom bag of some sort.

Re: JET new Vortex Cone Dust Collector

#5

Walt Bennett

Re: JET new Vortex Cone Dust Collector

Walt Bennett

John - have you tried finding out where you're loosing vacuum? I've had a trash can set up before my dust collector for years and never had any issues, and the collector bag gets nothing but dust. I think I got the lid from Penn State, but am not certain. There's a foam seal that runs around inside it, so there is a good seal between the metal can and plastic lid. I've tried pulling it off while the collector was winding down and had to wait until it'd stopped almost completely.