Re: check out this homemade coring rig
Leo Cuellar
Have you had time to work on this one yet, John? I've been collecting parts, pieces & tooling and finally tacked the first one together today...
I'm still waiting on some miniature bolts, taps, & wire drill bits to attach some carbide cutters.
Initial results were poor, but that was due to not owning enough fancy metal working jigs & clamps. I'm thinking that probably the easiest way to provide jigging will be to turn at least one wooden hemisphere to slice in half to provide a stable clamping base for tack welding all the pieces together. I haven't worked out all the details yet, but from there it may be possible to use spacers to assemble the other coring heads.
I got to play with my new Grizzly bench top metal bender. It seems like a pretty good unit for what I paid for it. Now I just need to learn how to bend a consistent curve with it. 
Since the coring tool pivots from a central point, one is limited to taking a piece of wood that is hemispherical. The only way I can see to change that, is by using a larger knife head and setting the pivot point back from the piece you are coring. By doing that one might lose that handy core capturing feature, but might be able to take a core from a shallower blank. I've got some ideas on how to work around that, but they'll have to perculate for a couple of weeks.
I'm going to stop by my local ReStore tomorrow & see if they have any chunks of laminated beams to save myself a little work.
Leo