Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Jennifer, some other tools...

Posts

Jennifer, some other tools...

#1

Leo Cuellar

Jennifer, some other tools...

Leo Cuellar

that you might find of use are these doming punches & block. They were about $35 at Harbor Freight & not too bad of quality.



You'll probably find the punches of greater utility than the block, as have I, but it might make a nice paperweight.

A lot of sheet metal tools were made of hickory & hickory faced with leather. I was playing around with some soft wood...



And made a couple of simple blocks to form some copper with...

I pounded out the bowl of the spoon in the carved hollow in the block with the punches & smoothed it out on the turned stick with an old Rosewood "potato masher" mallet.



and this is my first try at a copper spoon. Made from a section of 3/4" pipe for the bowl, with a tang left on it. The shaped & brass pinned ferrule was made from 1/2" pipe. You can't see it in the picture but the ferrule comes to a point & overlaps the bowl of the spoon inside & out. The handle is Catalpa. It was fun trying to figure out how to do this, the next one should be easier.

Re: Jennifer, some other tools...

#2

Steven Antonucci

guess where I am headed?

steven antonucci

$35 at HF! For a swage block with all of those profiles? I think it's a steal...

Thanks for posting

Steve

Re: Jennifer, some other tools...

#3

Re: Jennifer, some other tools...

Cyril Griesbach

Wow, Leo, that looks fantastic.

Re: Jennifer, some other tools...

#4

Barb Siddiqui

Thanks Leo, me too.

Barb Siddiqui

Re: Jennifer, some other tools...

#5

Re: guess where I am headed?

dick gerard

hmmm, looks promising! Now if I could only find a way to teleport me to HF, since I am still prohibited from driving and my wife is visiting (out of town) for a few days. Beam me there Scotty!

Re: Jennifer, some other tools...

#6

Leo Cuellar

Subtle, clever, sneaky...

Leo Cuellar

little pun there, Steve. :D It is great that Bellingham ended up with a HF walk in store somehow. It is handy to be able to see if what you're considering is a chunk of junk or not.

Leo

Re: Jennifer, some other tools...

#7

Leo Cuellar

Trick photography...

Leo Cuellar

Cyril. Don't focus on the bad spots. Lots of mistakes were made on this one. I drilled to close to the end of the reinforcement tabs on the bowl end of the ferrule. Next time I'll grind the shape for that portion onto a metal rod that I can insert into the pipe to make the shape more flowing. I also should have textured the ferrule. I like the hammered look better and it makes it easier to hide small flaws. I did discover that Dr. Pepper works great to pull the tarnish off copper. I didn't have a small enough buff to fit inside the bowl of the spoon.

Thank you for the compliment!

Leo

Re: Jennifer, some other tools...

#8

Steven Antonucci

Dremel for buffing small items

steven antonucci

Re: Jennifer, some other tools...

#9

Steven Antonucci

One in NJ off of Route 80 too...

steven antonucci

I never thought of them for this type of stuff... I looked at their anvils a couple of years ago, and they were crap, but for this type of stuff, I think it would be OK, since I was using wood blocks like the ones you showed...

Walk-in, if it's crap, turn around and walk out...

S

Re: Jennifer, some other tools...

#10

Jesper, Denmark

Re:Be careful.....

Jesper, Denmark

Back when copper was used for making kitchen utensils, like pots and pans, they were always tinned on the inside.

The reason is that corrosion products of copper are toxic and should not be in contact with food.

Re: Jennifer, some other tools...

#11

Leo Cuellar

Re:Be careful.....

Leo Cuellar

Interesting point to consider, Jesper, and worth looking into, thank you. I have a very old set of Copper Revere Ware frying pans that were supposedly used in a House Of Ill Repute out here in the San Juan Islands. The tinning is mostly gone from the smallest one, which is the one I usually use. On the other hand, I don't think I've ever seen a copper teapot that was tinned inside other than the seams. Copper was also used extensively for condenser coils in stills. Would tinning possibly have been more of a consideration because our ancestors didn't have adequate refrigeration & acidic foods left sitting in copper pots caused bad chemical reactions & wore out faster?

Leo, who constantly poisons himself from design & default. :b :D

Re: Jennifer, some other tools...

#12

Leo Cuellar

A video that may be of interest... *LINK*

Leo Cuellar

Jesper's question was of course, sincere & legitimate. It lead me down an interesting little path. It seems that opinions of tinning are quite mixed and dangers mostly relate to my off the cuff comments in the previous post. I found an informative thread on another site about tinning & a great little youtube video for those that might be interested. Might have to give this a try when I get the time to re-line my little forge. This guy is great. I've never seen a sit down forge before!




Talk about tinning

Re: Jennifer, some other tools...

#13

Re: Jennifer, some other tools...

Jennifer Indy.USA

Leo, thanks for the post. I've seen this little set at HF and several times had it in my hand to purchase and never did. I haven't been over there since I got the bug for pounding on metal so maybe next time I'll give them a try. If for nothing else that way cool texture that Charlie posted a picture of a while back. The bumpy one. the little punches might work for that. My buying guide to HF is that if it's suppose to cut or if it has a motor don't buy it from HF. this passes my rule so I guess I should give them a look again.

Way nice spoon too!

Jen

Re: Jennifer, some other tools...

#14

Leo Cuellar

Re: Jennifer, some other tools...

Leo Cuellar

No problem, Jen. Actually I bought a nice air powered mini-needler (rust removal tool) from them that has held up quite nicely. I need to try it on a piece of copper to see if it does a nice hammer texture.

I'm including a couple more pictures of the parts, in case you want to try making some spoons. I've been cutting up water pipe remnants, the 3/4" translates to roughly 18G which is getting pretty close to the limits of what I can cut with tin snips. I'm going to have to invest in some electric shears. :D Yes even more tools! Which by the way an assortment of old pliers with the teeth ground smooth, are going to be something worth having I think.

This first picture is what some of the rough parts look like...



The chopped off bolt has the end ground down at an angle and a slot in the center to hold a piece of copper to keep from smashing the end too far when shaping it. I think I might make the end more of an oval shape instead of flat. The transition might look better that way. The slot is deep enough to slide the spoon tang into for additional blending of the shape.



Some detail of the ferrule area that wasn't visible in the first posting. I just went with a simple triangular shape, but lots of other things could be done with this. This is actually a different spoon, I'm still trying to get proportions worked out. You definitely want to cut your blank bigger than you think it should be by about 20% :\



I played at trying to add a little bit of turning to the ferrule on this one. I tried out some carbide metal bits & HSS both seemed to work OK. A file would work but would quickly clog. I mounted the un-worked 3/8" pipe between two cone points. I haven't decided whether soldering or brazing is better, I guess its about which look you prefer. Waterproof epoxy would probably be best for attaching the handle.

That's about it.

The pictures of your new kitchen look great by the way!

Leo

Re: Jennifer, some other tools...

#15

Re: Jennifer, some other tools...

Jennifer Indy.USA

Leo, great how to pics. Thanks for sharing these!

Re: Jennifer, some other tools...

#16

Re: Subtle, clever, sneaky...

Don Evans

This set is well worth the price, I got it about year ago on sale but don't remember the price $35 sounds right. It is surprisingly well made and the rounded polished punches are smooth and finished surprisingly good, no pits and each fits the block very well.

I got much more quality with this than I expected, hope they have keep the standard up so you guys get a good one.

Don

Re: Jennifer, some other tools...

#17

Re: Jennifer, some other tools...

john lucas

Leo Thanks for posting that. It has given me some ideas to play with.

Re: Jennifer, some other tools...

#18

Leo Cuellar

No Problem

Leo Cuellar

The way I figure it, John, is that those of you who actually do this for a living might get more traction out of my ideas than I do. A short copper or brass sleeve on the handles of some of your mirrors might be a nice look, even if you don't do any spoons.