Does the 3-in-1 buff (Beal, Penn State, etc.) save much time and effort? Are the buffs spaced to be convenient or are they in the way of each other? Is the mandrel sturdy enough to prevent deflection under normal use? Do any of you have the standard Beal Buff set, AND the 3--in-1? If so, would you do it again?
Joe I didn't care for the 3-in-1. I sold it and had a 1750 motor sitting around and bought the beall with the extension so I could put the wheels on seperately. The 3 wheeler was just to close together for some things.
I used the Beall 3-in-1 for a while when I made a bunch of pens and other small items. Spacing of the wheels is fine for small stuff, but just won't work for bowls and larger items. I finally converted my system to Don Pencil's individual wheel setup. His long mandrels get the wheels far away from the headstock.
Ditto on what Jim said. Don Pencil's long buffing extension is the way to go. I did make my self a sort of 3 wheel buffer out of a paint roller. I built a jig to hold it and charge it with the 3 compounds. It's good for things like pens but won't reach into tight areas on my wine stoppers so I almost never use it now.
Pretty much what everyone else said. I have both systems and find them both very useful, but if I could buy only one, I'd have the single buffs with the extension.