Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Jet mini Lethality ?

Posts

Jet mini Lethality ?

#1

Jet mini Lethality ?

Doc Green

Mike R's "wondering" about the Jet mini got me to thinking about it, and I did a bit of scribbling to see what the numbers looked like.

My Jet 10-14 has a 1/2 HP motor. I assumed it to be turning at 2,000 RPM and turning a spindle, or whatever, that is 2.5" in diameter. Then, something gets wrapped around the spindle.

The pull exerted on whatever is wrapping up would be about 12 pounds.

It would wind up a one-foot length in about 46 milliseconds, which is on the order of 1/10 the time it takes a human to react. The implication is that you could be all wrapped up in the thing before you could even flex a muscle, or say "OH S--- !"

Now, the motor may not develop a full 1/2 HP at 2,000 RPM so the pull of 12 lbs may be overstated. However, you must also take into account the stored energy in the rotating spindle, chuck, motor armature, etc., if the whole thing is to be brought to a sudden stop. This force would be far greater than the 12 lbs the motor can exert while running without slowing down.

This is FWIW. The accident involving the young lady is very sad; a tragedy.

~Doc

Re: Jet mini Lethality ?

#2

Re: Jet mini Lethality ?

John Lucas

Don't forget that the drive center and tail center may slip. don't ask how I know this (he who wears 3/4 length sleeves)

Re: Jet mini Lethality ?

#3

Re: Jet mini Lethality ?

pete labelle

.......and the flywheel effect of the piece of wood and all the rest of the moving machinery needs to be factored in too.

Re: Jet mini Lethality ?

#4

Re: Jet mini Lethality ?

Vince Welch

Doc,

At a turning symposium last year where I was a vendor there was an area with mini lathes for people to turn as they wanted. In between that area and my booth was Doug Thompson in his booth. Suddenly, a loud scream comes from the mini lathe area and I look over to see a long hair lady fighting with a mini lathe. At this point I am in the middle of a call and I yell at Doug while pointing to the woman. Within no time Doug has scissors in his hands and is headed that direction. Someone had plugged the electrical cord before Doug got there and she pulled away from the lathe trying to assure everyone she was ok while blood was running down the side of her head. She wanted to turn more but those around encouraged her to clean her head and take a break. There are many stories out there like this Im sure. YOu never know... I'm just sayin...

Vince