Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

A box in ambrosia maple...

Posts

A box in ambrosia maple...

#1

Mike Stafford

A box in ambrosia maple...

Mike Stafford

Two of my friends, Ed Moore and Mike Smith, gave me some wonderful blanks of ambrosia maple at about the same time. I had been wanting some blanks of this wood with ambrosia figure tight enough that it would be highly visible in the box.

I roughed out several of the blanks and soaked them in alcohol and set them aside to dry. When I selected one to turn I found that the marker I used to distinguish who gave me the wood had turned into an unreadable black blob.

Anyway, this is the box I turned from the wood. I am very pleased at how well the ambrosia markings align at the join because I did not give that much of a chance of happening. My only concern is that the ambrosia markings may be too "busy" on an object of this size. What do you think?

The box is 2 1/2" tall and 3 3/4" in diameter.

All comments appreciated....

Thanks for the wood guys!


Re: A box in ambrosia maple...

#2

Re: A box in ambrosia maple...

Don at Central Illinois

Personally, I don't think the marking overpower the piece. Beautifully executed.

Re: A box in ambrosia maple...

#3

Dick Hines

Re: A box in ambrosia maple...

Dick Hines

Great box Mike! The bugs worked hard to get the wood to look like that. They must have known that you were going to make a box.

Re: A box in ambrosia maple...

#4

Re: A box in ambrosia maple...

Cyril Griesbach

Mike,

The marking are not too busy for the size and shape of this wonderful box. The grain match is spot on and I like the fact that the top is mostly dark as it compliments everything else very well.

Re: A box in ambrosia maple...

#5

Steve Kubien

Re: A box in ambrosia maple...

Steve Kubien

I like how the bugs hollowed it out and everything. :) I really like the ambrosia effects and do not think they overpower.

Re: A box in ambrosia maple...

#6

Mike, give credit to Mike Smith ...

Ed Moore in SW VA

because I don't want anyone to think that I gave away ambrosia maple that was marked as nicely as that in your box. Good job!

I went to the sawmill today where I buy the logs and they had no ambrosia maple because it has been so wet and they couldn't log. This is a large mill by local standards. I went up into the booth with the sawyer as he was operating the mill on a LARGE poplar log. Fascinating!

Ed

Re: A box in ambrosia maple...

#7

Keith Tompkins

Re: A box in ambrosia maple...

keith tompkins

Hi Mike, I think the ambrosia adds a great deal of visual interest...I'd be willing to bet this would sell quickly if displayed amongst a group of boxes turned from exotic woods. Very nice.

Re: A box in ambrosia maple...

#8

Re: A box in ambrosia maple...

bob davis

cool

Re: A box in ambrosia maple...

#9

Re: A box in ambrosia maple...

Craig Daymon

Personally, I think it looks great. Reminds me of a tortoise shell. Very cool box. If you remain unhappy with it, please let me know as I'll be very willing to adopt it.

-Craig

Re: A box in ambrosia maple...

#10

Don Leydens

Re: A box in ambrosia maple...

Don Leydens

Gorgeous box, Mike! Your shapes are sooo good I just stare at them for a while. Kieth is right, this would sell in a heartbeat. Very well done and I don't see the grain fighting with the piece at all. Just the opposite for me, I find the grain and your shapes very complimentary toward each other.

Re: A box in ambrosia maple...

#11

George Taylor

Great job Mike!

George Taylor

Your forms never disappoint!

George

Re: A box in ambrosia maple...

#12

perfect !

GaryG in MD

Re: A box in ambrosia maple...

#13

Re: A box in ambrosia maple...

Bernie Weishapl

That is a beauty Mike. I really like the ambrosia in this one.

Re: A box in ambrosia maple...

#14

Suweet!

Jennifer Indy.USA

That's all I have to say.

:)

Re: A box in ambrosia maple...

#15

Like the rest...

David Walser

Mike,

Like the rest, I think the box is stunning. I've printed pictures of several of your boxes to keep by my lathe for inspiration. I'll have to add a picture of this one to the collection.

I also think the photography is excellent. The angle, looking slightly down from above, shows off the beautiful silhouette while, at the same time, allowing us to appreciate the depth (as well as the width and height) of the box. I also like how most of the box is in sharp focus while the edges blur just slightly. That, too, give the picture more depth and drama. It's almost as if you were using a fisheye lens. Would you mind sharing the details of you camera and lighting set up?

Re: A box in ambrosia maple...

#16

Incredible.  It's truly a masterpiece.

Greg_Haugen

Re: A box in ambrosia maple...

#17

Mike Stafford

Thank you!

Mike Stafford

I always appreciate you folks who take the time to comment on one of my boxes. My wife whose opinion I value immensely on matters of box appearance and everything else does not particularly care for this box whereas I like it a lot. I am particularly pleased that the ambrosia figure remained aligned after parting. I think she does not care for the ambrosia figure. That's okay as she is entitled to her opinion and always tells me her opinion.

David, your comments about the photo are some of the most flattering things that have ever been said to me about my photography. My dear friend Jamie Donaldson might not agree as he has been encouraging me to change my photo setup to eliminate some of the excess light which is causing the blurry edges. I believe Jamie calls it bleedthrough.

My photobooth is a plastic box 18 inches square and 14 inches tall. I am using a piece of that soft cushiony plastic material (the spongy stuff) that you can get at Michael's for the background. I have a single circular daylight fluorescent bulb mounted above the photo area. I use a piece of dark blue velvet just out of view on the backdrop to reduce the reflected light that bounces from the backdrop onto the lid. I also use a piece of dark brown velvet on one side of the box or the other to reduce the light bounce from that area. As necessary I will use pieces of brown cardboard on the other side to help with the light. I also will use foil covered bounce cards as well as shiny white bounce cards in the front to direct more light if needed to the front of the box to eliminate heavy shadows if present. I am using a Canon SX10IS camera on a tripod. I use preprogrammed custom settings and alter the exposure manually opening it from +1 to +2 depending on what it takes to get to "see" the wood correctly.

I am sure Jamie and John are more responsible for whatever photo success I have than I am because between the two whatever I know about taking pictures I learned from them.

Again, thank you to everyone who commented. It is always nice to get feedback.

Re: A box in ambrosia maple...

#18

Re: A box in ambrosia maple...

Bill Turpin in WNC mountains

A quality piece of wood to start with. Ambrosia is probably my favorite domestic wood. We can get a lot of it from a local sawmill. To find such dramatic fiqure, we usually also find grey/blue staining in the white un-ambrosied wood. I do not like that staining. Your turning is excellent. This piece would be the center-point of anybody's collection!

See you in Greensboro in October.

Bill

Re: A box in ambrosia maple...

#19

Re: A box in ambrosia maple...

Ray Carson

Very nice.

Re: A box in ambrosia maple...

#20

Outstanding!!

Toney Robertson

Beautiful wood and you made it into a wonderful box.

Re: A box in ambrosia maple...

#21

Leo Cuellar

Re: A box in ambrosia maple...

Leo Cuellar

Your boxes are really fine, Mike. I'm sure that you could take a chunk of fence post full of nail holes & make it look great!

Re: A box in ambrosia maple...

#22

Re: A box in ambrosia maple...

Bill Clark

Beautiful job, beautiful wood and the grain match is outstanding.