Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Does anyone move the leg of their wolverine jig?

Posts

Does anyone move the leg of their wolverine jig?

#1

Does anyone move the leg of their wolverine jig?

Chris Hoehle

This is just kind of a general curiosity question. In watching John's video below about sharpening, he mentions that he pinned the leg of his Wolverine jig such that it is no longer movable, and this seems to be a pretty common approach. In Kirk DeHeer's article in sharpening in American Woodturner, he also mentions setting the leg to a certain angle and forgetting about it, the Ellsworth jig doesn't have a movable leg to begin with, and I set my Wolverine jig up using the printout from Doug Thompson's website and haven't moved it since.

So all this just kind of got me to thinking- does anyone here move the leg on their jig for different sharpening applications? If so, can you explain why you move the leg as opposed to changing the distance of the v-pocket from the grinding wheel? In Mr. DeHeer's article, he talks about how the setting of the leg will change the angle of the wings of the gouge, so has anyone played around with this and found a side angle they like better than what they started with (or one that you use only for certain applications)?

Re: Does anyone move the leg of their wolverine jig?

#2

I use 2 different leg settings, 1 for.....

JamieDonaldson

..bowl gouges that is the same as Doug's, and another for my 1/2" spindle gouges. It changes the bevel angles from 60 for bowl gouges, to about 45 for spindle gouges. I also grind a long secondary bevel to round the heels of the spindle and detail gouges.

Re: Does anyone move the leg of their wolverine jig?

#3

Steve Kubien

Re: Does anyone move the leg of their wolverine ji

Steve Kubien

I used to move it around but haven't in a year or two. No good reason why or why not. I've got grinds on my tools that work for me though I am contemplating a steeper nose on my bowl gouges to make transitioning to the bottom of the bowl easier. Ya know, I have a 5/8" P&N bowl gouge that I think I will mess around with. It's a nice tool but I prefer my Thompsons so I'm not afraid to grind away some steel.

Now, where did I put that round tuit?....

Re: Does anyone move the leg of their wolverine jig?

#4

Dennis in Southern Oregon

Re: Does anyone move the leg of their wolverine ji

Dennis in Southern Oregon

Chris, depending on what kind of turning you do and your personal preferences you may not need to change the varigrind angle. The adjustment angle primarily affects the shape of the wings, assuming that you have set the v-arm to produce the desired nose angle. DeHeer advocates setting the varigrind angle to 23 degrees for all gouges. When I reviewed his DVD, I was a bit sceptical, so I ran several experiments to try to verify this. What I found was that this angle seemed to work okay for most spindle and bowl gouge grinds except for ones with long swept-back wings (wings longer than the diameter of the gouge). As it happens, I like long wings on some of my bowl gouges for nback cuts and shear scraping and find that a varigrind angle of about 45 degrees works best for these. Note that you CAN grind a long wing using a 23 degree varigrind angle but the back of the wing becomes so blunt that it is useless. Rather than readjusting the varigrind, I have made simple fixed versions of the jig for the two angles that I commonly use.

Dennis

Re: Does anyone move the leg of their wolverine jig?

#5

Re: Does anyone move the leg of their wolverine ji

pete labelle

2 operating positions (measured with a file notch in the tube, and all the way retracted to keep from tearing up my hip.

Re: Does anyone move the leg of their wolverine jig?

#6

JL

Re: Does anyone move the leg of their wolverine ji

JL

I use one setting for bowl gouges and another for spindle gouges.

Re: Does anyone move the leg of their wolverine jig?

#7

how about interchangeable length?

John Lucas

I was thinking about this the other night. It would change the wings and probably work better for spindle gouges if you want more of a true fingernail shape. To sharpen some spindle gouges I use the V block with the handle in the V. As I rotate the tool toward the outer edges I raise the cutting edge up the stone. I do this because the Wolverine jig rotates the tool too much. It occured to me if the angled rod were very long the tool would rotate less, I think, and give a different shape to the outer edges of the gouge. That's one I may have to jury rig to see for sure.

Re: Does anyone move the leg of their wolverine jig?

#8

I don't

Jennifer Indy.USA

I use Doug Thompson's method and lock the leg in one position. The one pictured on his website. I never move it and I get a really great grind on both my detail gouges and bowl gouges no matter what the diameter of the tool is. I use this method for teaching as well. it really simplifies it for students and gets them up and turning much faster than having to explain or fiddle with different settings on the Vari-Grind jig.