Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

New guy intro

Posts

New guy intro

#1

Don Leydens

New guy intro

Don Leydens


Hi folks!

After turning for a little over a year and a half, I have a feeling I should have joined this group a long time ago. Alot of friendly and talented people here. I hope I can contribute something useful once and a while and have some fun too.

Quick intro:

A little over a year ago I lost my business due the bad economy. Two days later I found out I had stage 3 lymphoma cancer. Tough week huh?

Anyway, I figured I better find something to keep me occupied during the chemo and radiation that wasn't overly physical. I always enjoyed woodworking but thought I'd give woodturning a try. I bought a used Powermatic with my last 2,000 dollars and haven't looked back since. What an awakening it was. I had finally found my true passion (it only took 55 years)! It was very therapeutic, creative and just plain fun.

All is well now and I'm in full remission and not looking back. Way too much wood out there that needs to be turned.

Now that the docs are letting me out, I'm having a ball meeting other turners like Mike Stafford, Frank Penta and many others. So much to learn and this site is another step forward. Many more steps to come. This is just too much fun. See how something that appears terrible can turn into something fantastic? I did.

This piece (Buckshot Buckeye) is an 18.5" Buckeye Burl platter. I really enjoyed turning this even though it was a little nerve wracking at times worrying about an important piece coming off, but none did. A bit punky in spots, but some shellac mix helped that a lot. Some texturing along the rim and some on the back as well.

Thanks for looking and all c&c are more than welcome.

Don Leydens

Re: New guy intro

#2

Re: New guy intro

matt overton

Beautiful platter!. Welcome, this is a wonderful community. Your story is truly inspiring. Looking forward to seeing a lot more of your work.

Re: New guy intro

#3

Re: New guy intro

Bernie Weishapl

Great looking platter. Glad to hear things are going well for you and truly a good ending.

Re: New guy intro

#4

Aage Rendalen

Great art piece

Aage Rendalen

Woodturning tends to take the shine off our old careers, doesn't it? I've been at it seven years and never grown tired of it. What's so unique about it is that it's both easy and so very hard. There is satisfaction to be had right away but never any laurels to rest on. It's a deeply satisfying obsession.

Re: New guy intro

#5

Mike Stafford

Re: New guy intro

Mike Stafford

When I saw the title "New guy intro *PIC*" I was afraid that Don had put a picture of himself in the thread. I shudder to think what that would have done to the unsuspecting innocence of some of the visitors to WC. :b

I was relieved when I saw the picture of Don's magnificent buckeye burl platter. Ain't that a beaut!!!

Don is a friend of mine and he is one of the finest new turners I have ever seen. When I grow up I hope I will have half the turning skills and talent that he has. Besides that he is one of the good guys.

And you would not believe how much Mexican food that boy can eat. :D :D :D

Re: New guy intro

#6

Jim in Burlington Ont.

Re: New guy intro

Jim in River Oaks, Ont.

Hi Don,

Beautiful piece, I like the design and natural look. Welcome to WC

Take care,

Jim

Re: New guy intro

#7

Keith Tompkins

Re: New guy intro

keith tompkins

Hi Don. Welcome aboard....very nice piece!

Re: New guy intro

#8

Leo Cuellar

Re: New guy intro

Leo Cuellar

Hi, Don,

welcome & thanks for posting such a beautiful platter. An inspiring piece of work as is your personal story. Very glad to hear that your health is improving. I'm looking forward to seeing more work from you for a long time to come.

Best regards,

Leo Cuellar

Re: New guy intro

#9

Don Leydens

Re: New guy intro

Don Leydens

Thanks very much for the welcome guys! I appreciate that very much.

And don't listen to Mike about how ugly I am. A woman just told me I had a face as beautiful as a rare burl. Of coarse, she was looking at the outside, but.....

Thanks guys!

Don L.

Re: New guy intro

#10

Jim Barbour

Re: New guy intro

jim barbour

Welcome aboard Don. Excellent platter, inspiring story. We should all have your attitude and aspire to your skill!

Re: New guy intro

#11

Re: New guy intro

John Lucas

Don Beautiful piece. I hope we get to meet someday. You are definitely moving in the right direction.

Re: New guy intro

#12

Don Leydens

Re: New guy intro

Don Leydens

Thank you John. I sure hope we get to meet also and thanks for the kind words.

Aage - I think your statement about woodturning was perfect, sums it up beautifully.

Don L.

Re: New guy intro

#13

Re: New guy intro

Bruce Smith

Great looking platter Don, I don't believe you are a new guy, your platter reminds me of work from a pro.

You probably ment you were a new guy to Woodcentral, can't wait to see more of your work. Nice to know your health is improving, I have a sister in the same situation. Don if I tried to turn something like

your platter it would no doubt end up on the floor in 3 or 4 pieces as the result of a catch. Then again I'm

not so sure if I'm brave enough to put a piece of timber on the lathe with lots of deep inclusions as yours probably had.

Re: New guy intro

#14

Don Leydens

Re: New guy intro

Don Leydens

Thanks for the kind words Bruce. I really have a little old man who turns my stuff and I post it. He's been turning for 72 years. Still gets around.

Hey, a question for you guys. Some of you wanted to see more stuff and I have more photos, but I don't want to come across like some show-off know-it-all, cause I'm sure not. Should I post more? Just a thought.

Re: New guy intro

#15

Hi Don from Don

Don Orr

Great turning and better story! Glad your health has allowed you to put out such beautiful work.

How did you do the texture on the rim?

Re: New guy intro

#16

Don Leydens

Re: Hi Don from Don

Don Leydens

Hi Don! For the texture I used a really ugly homemade tool with a Sorby "wheel" attached to it. The fastest I could get this piece moving was about 500 RPM's so that's probably the speed the texturing was done at. I just slowly held the wheel against the rim till it started to turn and very gently pushed harder and harder till I thought I had some decent divots. A little scary, but it held. Kept moving the tool real steady like and it worked OK. I must have felt real confident that day.

Thanks for asking,

Don

Re: New guy intro

#17

Welcome to WoodCentral

Barry Irby

Glad you are OK. Great platter. By all means post some more. We are all eager to see.

Re: New guy intro

#18

You're off to a great start...

GaryG in MD

Welcome Don. You couldn't have made a better choice!

Nice piece! ...Gary

Re: New guy intro

#19

Re: New guy intro

Lan Brady

Don,

Welcome to the group.I think you will enjoy the experience.

Great job on the Platter. For a new turner, you must have a great natural talent. I look forward to seeing more of your work.

Lan

PS- Please stop by the Chat Room on Wednesday night and hang out for an hour!

Re: New guy intro

#20

I don't think I'd call you a new guy

Mike Foster

I know I've seen you on the board for a while. A really nice piece you posted and a great introduction to you. Welcome.

Mike

Re: New guy intro

#21

Brad Vietje

Welcome Aboard, Don!

Brad Vietje

Great news that your cancer is in remission -- I hope it stays away for good.

This is a fun group; there are so many talented people here who share their experience to help others. You probably won't find a better turning group out there. Your platter looks great, and I hope you'll share many more successes with us.

Safe spinning,

Brad Vietje

Newbury, VT

Re: New guy intro

#22

Steve Kubien

Re: New guy intro

Steve Kubien

Great to have you here Don!

Re: New guy intro

#23

Re: New guy intro

Don at Central Illinois

You have a natural talent. I've been turning longer than a year and a half and don't think I can put out something that nice. Welcome aboard. As they told me in Texas once, "We'll treat you so many ways, you're bound like one of them." And yes, we would all like to see more of your work.

Re: New guy intro

#24

Don Leydens

Re: New guy intro

Don Leydens

Thank you gentleman.

Here's some more stuff:


Re: New guy intro

#25

Re: Great art piece

Bill Neddow

After 15 years -- 13 of them doing production turning -- I can still agree completely with you.