Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Turning a wine stopper video *LINK*

Posts

Turning a wine stopper video *LINK*

#1

Turning a wine stopper video *LINK*

John Lucas

This is just me learning to do video again. I've forgotten just about all I learned before and have to learn new software on the school computer, (Imovie) Consequently I don't know what I'm doing. I hope someone learns something from this video. Mostly it's about how I use the tools not just turning the wine stopper. I usually use a skew when I do them but realize that most beginners use spindle gouges. any tips and comments welcome. I have a long way to go to become the next George Lucas. :)


http://www.youtube.com/watch?v=lfZsH-Xprtg

Re: Turning a wine stopper video *LINK*

#2

Re: Turning a wine stopper video

Carol Reed, Strawberry, AZ

Well, I'd look, John. But the video is listed as private and I have not been granted access.

I feel left out. :(

Re: Turning a wine stopper video *LINK*

#3

Me TOO!!!   

George Guadiane

Re: Turning a wine stopper video *LINK*

#4

Me Three

Dick Wilson

>:(

Re: Turning a wine stopper video *LINK*

#5

Must be rated XXX! I cannot view.

Galen Vetterick

Re: Turning a wine stopper video *LINK*

#6

Re: Turning a wine stopper video

Bob Macgregor

John,

It looks like the only way to stop the whine is to make the video available to the great, unwashed masses!

BOB

Re: Turning a wine stopper video *LINK*

#7

try again I think I fixed it.

John Lucas

Sorry about that. I clicked on the public button but apparently you have to go way down at the bottom and click on save to actually make it work. Unfortunately my home computer is down right now with a virus that's trying to sell me anti virus software. If I find that SOB that puts that stuff out there it will be a long slow painful death. Hopefully my son will be able to fix it today and get me back on the air.

I'm saving for a new computer and after this episode a MAC is looking better. Twice as expensive as the one my son will build me but I never hear of mac people having virus problems. I seldom do but about once every 3 years or so I get one I can't get rid of.

Re: Turning a wine stopper video *LINK*

#8

Nope, still private.

Scott in Falcon

Re: Turning a wine stopper video *LINK*

#9

Re: try again I think I fixed it.

Phil Powell

Hey you dirty biker fix this up............ please?

Re: Turning a wine stopper video *LINK*

#10

One more time- have I said I hate computers  *LINK*

John Lucas


http://www.youtube.com/watch?v=lfZsH-Xprtg

Re: Turning a wine stopper video *LINK*

#11

Re: One more time- have I said I hate computers

Cyril Griesbach

That link worked, John. Well done.

Re: Turning a wine stopper video *LINK*

#12

thanks Cyril

John Lucas

Apparently there is a time lag between the time you change it from private to public. I never intended for it to be private in the first place. there's just too many boxes you have to know about.

Re: Turning a wine stopper video *LINK*

#13

Re: One more time- have I said I hate computers

Scott in Falcon

Nice video. I like the camera angle as it allows an unobstructed view of the workpiece and a very clear line of sight to the tip of the tool itself. Also, the audio was clear and easy to understand. It's going to be really good when you get your mic back out. Well done. Thanks for taking the time to make and post the video (and deal with us whining about it being private! :) )

Scott

Re: Turning a wine stopper video *LINK*

#14

Nice Job!

matt overton

I like the camera angle and the audio. Much better than most!

Re: Turning a wine stopper video *LINK*

#15

Leo Cuellar

Re: One more time- have I said I hate computers

Leo Cuellar

Very good set up on this one, John. The audio was good, and it was easy to see what you were doing with the tool. Your explanation of the process was clear.

Re: Turning a wine stopper video *LINK*

#16

Re: Nope, still private.

Don Wilcut

I feel great. Viewed it the first time

Don

Re: Turning a wine stopper video *LINK*

#17

Steven Antonucci

Must be working, since I saw that little catch...

steven antonucci

at the 3 minute mark ;)

Good video, good audio, and I like the way that you explained stuff. It's got all of the info you need to make a stopper...

S

Re: Turning a wine stopper video *LINK*

#18

Re: Turning a wine stopper video

DickL in Tampa

Nicely done John. Your photographic skills show through.

Although I was a Windows programmer for 25 years (Windows 3.0 anyone?), I love my iMac and MacBook Pro, and you will too.

Re: Turning a wine stopper video *LINK*

#19

Jesper, Denmark

Re: Excellent.......

Jesper, Denmark

Clear and understandable as well as the proper technique.

I have one question, though: Why the Michelsen grind on a spindle gouge? I just cannot think of where the "off the wheel" bevel would be in the way on a spindle gouge?

Re: Turning a wine stopper video *LINK*

#20

Re: Excellent.......

john lucas

It's not a Michelson grind. His grind is totally convex. I have a 1/2" bowl gouge I ground that way and I'm trying to learn the differences. The first bevel is straight off the Oneway Wolverine jig but at a 35 degree angle. The rest of wha appears to be a Michelson grind is just getting rid of the steel so the tip will reach into tighter places. Removeing all the rest of the steel also makes it much quicker to sharpen the main bevel because there's not much metal there.

I'm going to try and do a video this weekend of how I grind this and my bowl gouge. I'll post it when I get it done.

Re: Turning a wine stopper video *LINK*

#21

Re: Excellent.......

Carol Reed, Strawberry, AZ

Looked to me to more of a Cindy Drozda grind. Hers may be a little more 'pointy' to sneak into those tight places on her finials. She has a link on FB to a Youtube showing how she grinds her spindle gouge. She also removes a lot of material on the bottom of the bevel.

Re: Turning a wine stopper video *LINK*

#22

Keith Tompkins

Re: Excellent.......

keith tompkins

Hi John, Good stuff. The video will be a great help to many turners. There is so much material under the flute on theThompson detail gouge that it's a must to grind back the bevel to avoid levering the tool out of the cut. I like the convex grinds, even on a skew.