Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Possibilities Other Than SMOOTH & SHINY

Posts

Possibilities Other Than SMOOTH & SHINY

#1

Possibilities Other Than SMOOTH & SHINY

charlie belden

My recent Q 'n D (quick and dirty) experiment making "frog bumps" / "ostrich skin" texturing raised another area to explore - exploiting raising the grain.

We spend a great deal of time and effort to sand pieces as smooth as possible, then often carefully apply a "finish" over the already smooth and often already shiny raw wood. But. in doing so, we remove, or cover up, or encapsulate some of the wood's "woodness" - the tactile quality.

Oddly, we often spend a great deal of time and effort to ADD tactile features to piece - texturing, pyorgraphing, carving - but more as visual "enhancements" rather than tactile enhancements. Some do exploit the "winter wood / spring wood" nature of wood - by sand blasting most if not all of the softer, faster growth "spring wood" to create a skeletal / lacey piece that is clearly WOOD - using a sandblaster.

When I steamed my "frog bumps" test piece, in addition to popping the bumps up, I also raised ALL of the grain. Of course my first reaction was to grab a burnisher and start burnishing the raised grain down to get it back to SMOOTH (and a little shiny). But while I was holding the piece to burnish it, I noticed that it felt "different". It felt kind of like velvet - when rubbed in one direction, much less so in the other direction. FUZZIES are directional.

Hmmm . . .

Even the look of the wood's surface was interesting - almost a frosted look - the grain still visible, but softened a little - understated instead of emphasized as is normally the case.

Hmmmm . . .

We seem to focus almost exclusively on the LOOK of pieces - and ignore or completely overlook the FEEL of pieces. And when we do incorporate FEEL in a piece it's usually imposed ON the wood or IN the wood. But when it's the actual nature of the wood - like its grain raising thing - we remove it.

WHY? Why not exploit that wood characteristic - sometimes?

(am still thinking about what pieces turned for the blind might incorporate)

Re: Possibilities Other Than SMOOTH & SHINY

#2

Richard Allen

Re: Possibilities Other Than SMOOTH & SHINY

Richard Allen

Some folks want to make turnings which will last for fears if not decades. The raised grain will collect dust that will be trapped in the raised grain. That look and feel will will not last for very long and the result in a few months will be a dirty ugly mess. Some folks will call that "patina". In this case the "patina" is just being dirty.

We prepare the surface so that a finish can be applied to protect the wood.

Re: Possibilities Other Than SMOOTH & SHINY

#3

Re: Possibilities Other Than SMOOTH & SHINY

charlie belden

While Made To Last Lifetimes pieces are a noble goal, how many pieces we turn will actually become cherished heirlooms that will be passed down for generations? I'm gonna go out on a limb and guess that most of us have a LOT of pieces we've turned all over the house - as well as stuffed in most nooks and crannies in the shop/studio. Few if any will end up in the china cabinet grandma willed to your mom, who in turn will pass it on to you.

I think most amateur/hobbyist turners turn pieces because they get something out of doing the turning. The end result, if it turns out well, is a nice bonus. Why not do a piece or two every once in a while that's intended to be a transient thing to be enjoyed and then perhaps replaced at some time down the road.

If a piece is intended for blind folks to experience and enjoy for a while, why not?

Re: Possibilities Other Than SMOOTH & SHINY

#4

Steven Antonucci

Blow them clean with a compressor

steven antonucci

When people make those spotlighted curio cabinet objects, I often wonder how much enjoyment you can get from looking at them? Is it the same as the guy who has the collectible car that he trailers to a show, and spends three days polishing everything, but never drives it?

The stuff that is in museums today has grown into its skin over millenia, all without the benefits of micromesh. Wood is a tactile medium, and I'm a big fan of texture.

BTW- "Frog Bumps" doesn't work on end grain maple very well...even if the bumps aren't bumps ;)

Re: Possibilities Other Than SMOOTH & SHINY

#5

Re: Possibilities Other Than SMOOTH & SHINY

Mark Mandell - Gone Round In Jersey

Charlie,

I did a number of jars that, after sanding was finished, I took out to the sand blaster for a light "application" of No. 2 sand. I then misted on a couple of coats of 1/2 lb. cut of dewaxed shellac. The result was a lovely suede-like surface that has lasted nicely for more than 5 years. Part of the original idea was to have the items "hand-polished" in spots through being held and rubbed a bit by the owners. On several others I treated the shellac like sanding sealer and lightly rubbed the surface with fresh 800 grit paper to just remove the stiffened fibers. What I got was a surface that, if you closed your eyes, could fool you into thinking it was pigskin leather.

The color I got on walnut was really nice as it resulted in a smokey old-looking piece reminiscent of old wood you might see in a museum. Here's an example