Re: OT Wireless and Wired Modem
Dave Paine
Wireless can be a challenge.
It is not as simple as which brand of Router. Also need to know the brand of the card/chip in the computer, the version of the wireless specification "b" vs "g" vs "n".
The latest is "n". This is potentially the fastest, being the most recent, but also it does better at reflecting the signals off walls, etc.
"a", "b" and "g" are more line-of-site and if walls the in the line-of-site the signal can be degraded.
Last year I installed a broad band amplifier in my house, so that I had improved signal strength and bandwith for steaming Netflix TV or movies and also to improve my neighbors signal.
The amplifier improved the signal in the house, and for the neighbor, but the bandwith at her connection was still less than desired.
So I also installed a higher power EnGenious radio (USB connection) on my neighbor's PC and now she is getting 120 Mbps and over 70% signal strength over the distance.
The issue is not the number of people connected, but how well your Router and computers interact.
I have a Dell ZINO which is nominally "n" band wireless. This does not perform to the stated speed. I have this connected to a DLink bridge which almost doubles the performance since I have a DLink "n" router.
The best performance is if the router and card/chip in the computer are from the same manufacturer.
The EnGenious USB radio was inexpensive. Do a Google search and take a look. This is being used on a really old Dell desktop.