(Message Deleted by Poster)
Jim in River Oaks, Ont.
Knowledge You Can Build On — Est. 1998
(Message Deleted by Poster)
Jim in River Oaks, Ont.
Re: The GHWG Welcomed Cindy Drozda
Bernie Weishapl
Jim I got to attend one of her demo's. I really like her boxes and finials. I would like to get one of her vortex tools. Hope you had as much fun as I did and even learned a little something.
Re: The GHWG Welcomed Cindy Drozda
Stephen Mushinski
Just finished up Cindy's demo at the Kawartha Woodturners Guild, in Peterborough. She changed the line up a bit due to a vote and we didn't get the star box
. Everything was fantastic and lots of great tips have been put into the tool box!
Very good demonstration!
looks like a productive workshop
steven antonucci
One of my clubs just started asking the question: "So, we had so and so in to demonstrate. What did you learn?" I'm betting that you guys would get a lot of good answers after her demo...
S
Re: looks like a productive workshop
Bob Strand
Hi. I'm probably the only woodturner up here in Valley County, so there aren't any clubs or demos from anyone but in looking at the pictures of Cindy's demo what I noticed right away was the smock she had on with the sleeves cuffed down. I thought right away of how many time I had been on the lathe with some raggedy old shirt with the sleeve unbuttoned. Jeez, what a great slap-in-the-face of how to do and how not to do.
Bob Strand, Ft. Peck, MT
Re: looks like a productive workshop
Jim in River Oaks, Ont.
Hi Bob,
Cindy's turning smock is the one Lee Valley sells. The demonstration was given less than a km from the LV Burlington store, I wonder if Mike took her over for a look see 
Take care,
Jim
Re: The GHWG Welcomed Cindy Drozda *LINK*
charlie belden
She sure covers a lot of ground in her day long demos. I took notes and photos on her process for turning an inlayed rim box.
When I got home, while things were still fresh in my mind, I started putting together step by step illustrations with notes. Between my notes and the pictures I took, after three or four iterations, I went out to the shop to test what I had. I cheated by turning the finial separately. When there was a gap in my illustrated procedure I went back to the notes and pics, revised things and ventured on. My result sure won't be mistaken for one of her pieces - but the illustrated procedure will be handy - at the next attempt. Her chucking sequence is pretty critical. Miss a step and you can find yourself in a Box Canyon - with no way out and now way foreward.
Her Green Tape use alone was worth her demo's admission price.
If you want to give this a go - these illustrated notes may save you some grief.
Illustrated Procedure - Inlayed Rim Box w Finial