Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

I need (carbide) help!

Posts

I need (carbide) help!

#1

Steven Antonucci

I need (carbide) help! 

steven antonucci

I now understand the true benefits of carbide. I was cutting this pendant the other day, and I couldn't get a clean surface. I need nano carbides badly!


When you are working on small materials like this, the nano in nano carbides is the only material capable of dealing with the nano forces. As you can see, regular HSS was no match for this material, and the tearout makes me ashamed to post it.

I have learned my lesson, and I started drilling holes in all of my tools to attach nano carbide cutters. Tomorrow, I will be carbide ready!

Steve

P.S. April Fool's :b

Re: I need (carbide) help!

#2

Alan Zenreich

Re: I need (carbide) help! 

Alan Zenreich

Steve,

You are learning. You have to use the correct tool for the material.

For example, while I was waiting to teach a pendant turning workshop at our local club a few months ago, I created the light colored pendant in this photo.

It was a spur of the moment, unanticipated creation, using material "found" near some coffee during the show-and-tell that preceded my workshop.

I mention this because I used a little known "nano-carbohydrate" tool to enlarge a pre-existing void in the material so I could thread the necklace.

Because this non-traditional tool should only be used by highly skilled professionals, I didn't want to leave the pendant around, for fear that amateurs might attempt to duplicate the process.

The public must be protected. So I ate it.


img

Re: I need (carbide) help!

#3

Steven Antonucci

cookie crumbles...

steven antonucci

That's the way...

I have that box full of cutoffs for you...minus this one of course: )

Re: I need (carbide) help!

#4

I'm going straight to this   *LINK*

john lucas


http://books.google.com/books?id=Xs8DAAAAMBAJ&pg=PA82&lpg=PA82&dq=carbide+cannon+plans&source=bl&ots=L-Rtv9Psmj&sig=VH69MK7nnkTVdjZRadJbWVO-WL8&hl=en&ei=sAWXTZu1DsugtgfC-82zDA&sa=X&oi=book_result&ct=result&resnum=10&ved=0CF4Q6AEwCTge#v=onepage&q=carb

Re: I need (carbide) help!

#5

Re: I'm going straight to this

john lucas

Darn The link wouldn't work. It was a link to building a Carbide Canon. Why mess around with hand tools when what you really need is more power.

Re: I need (carbide) help!

#6

Alan Zenreich

Re: I'm going straight to this

Alan Zenreich

John,

That would certainly speed up the piercing and texturing process.

Re: I need (carbide) help!

#7

Re: I'm going straight to this

Stuart Johnson

Too bad the link didn't work. I had one when I was a kid made out of a tomato juice can with a spark plug. It would send a rubber ball a good distance with a bang that would satisfy any kid.

Re: I need (carbide) help!

#8

Alan Zenreich

Re: I'm going straight to this

Alan Zenreich

John's link worked for me, but it took a while to load the complete page.

Re: I need (carbide) help!

#9

Jerry Louden

Re: I'm going straight to this

Jerry Louden

The link worked and it was fun to be reminded what was going on in 1979.

Re: I need (carbide) help!

#10

Re: I'm going straight to this

Stuart Johnson

I got it by changing the word carb to carbide cannon in the search on the web page. That cannon is much more refined than my tomato juice cannon from the '50s.

Re: I need (carbide) help!

#11

Re: I'm going straight to this

Frederick Nelson

Another source of carbide cannons, although no projectiles are involved.

http://www.bigbangcannons.com/

Fred

Clear in Eastern Missouri