Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

1 hour hands on demo

Posts

1 hour hands on demo

#1

1 hour hands on demo

John Lucas

Here's what I 've been asked to do. They are wanting to have various crafts offered where the person can come in and in one hour we teach them to make something. that would of course include a very short demo followed by them grabbing a tool and going at it.

don't know if I want to do that but if it was you, what would you teach and what tool would you use. These are raw beginners who have no experience cutting wood whatsoever.

My thought would be to take a negative rake round nose scraper and either turn a candle stick of some sort. I suppose you could turn a bowl if you used a paper joint on a wasteblock. Have them turn the inside first and then work on the outside. As much as I am a fan of the bowl gouge I think using one of those would seriously reduce the number of successful projects completed. With a negative rake scraper it would be harder to present to tool at a bad angle.

Re: 1 hour hands on demo

#2

Lyle Jamieson

Re: 1 hour hands on demo

Lyle Jamieson

Wow, that would be tough. My first thought would be to do a top or ring holder.

Re: 1 hour hands on demo

#3

What about a plate

Dick Wilson

Re: 1 hour hands on demo

#4

Steven Antonucci

How much hands on?

steven antonucci

Do they have to do every step of the process? Can you make a part of the project and have them make another part? Or prep a bunch of parts that get past that hard part?

A top is a one tool project. A spindle gouge gets you home. Keep it simple and focused on one thing.

S

Re: 1 hour hands on demo

#5

Re: 1 hour hands on demo

Doug Turner

John, Pen kits are always popular. If you can buy 7mm pen kits for less than $2, and may even get some donated if you pass out the vendor's catalog. Craft Supplies USA starts raw beginers turning pens in a few minutes and then looks over their sholders and corrects turning skills. Each person ends up with a free pen, which would make you very popular.

Re: 1 hour hands on demo

#6

A Potato Masher

Jorge Casta�eda

using nothing but the skew

Re: 1 hour hands on demo

#7

Re: 1 hour hands on demo

Emmett Manley, Lakeland, TN

All I can think of here is liability and insurance issues.

Re: 1 hour hands on demo

#8

Alan Zenreich

Re: 1 hour hands on demo

Alan Zenreich

I'd consider having them make a bottle stopper. There's great flexibility in form and it can be accomplished using any number of tools. It also lets you teach boring a hole on the lathe.

Re: 1 hour hands on demo

#9

Brad Vietje

Bottle Stopper, Top or Easter Egg

Brad Vietje

I like Alan's idea, or perhaps a top with chatter work. How about an Easter Egg, which could have some burned lines and coloration from markers...?

Have fun, John,

Brad Vietje

Newbury, VT

Re: 1 hour hands on demo

#10

Re: 1 hour hands on demo

Dave Peebles Lyons, Ohio

John,

Is it ok to just say no!!

What they... who ever they are, are asking is a little strange to me.

Why not a class where they could really learn the art of turning. It seems that they have a very simple concept of what it take to be truly good at woodturning.

But, maybe the money is to good for you to turn down. I can relate to that, but even a poor broke turner like me would say thanks, but no thanks.

Dave

Re: 1 hour hands on demo

#11

Joe Fleming

Carving/shop mallet

Joe Fleming

Re: 1 hour hands on demo

#12

A pen or a weed pot

DavidWalser

John,

I agree with the suggestion that a simple 7mm or Sierra pen would be something that your class of newbies could make in an hour. It could be made from start to finish with a roughing gouge (and sandpaper).

Another option would be a weed pot. It would allow them to turn a blank from square to round and then to work on two of the basic turning forms -- a bead (the bottom of the weed pot) and a cove (the neck). This project could be done with two tools, the roughing gouge and a spindle gouge.

Re: 1 hour hands on demo

#13

Chain pull

Ron McKinley

Re: 1 hour hands on demo

#14

Re: 1 hour hands on demo

john lucas

A little more explanation is in order. Each year the Craft Center has what they call a Celebration. It is a one day event with all sorts of activities. It used to be only demos with some simple hands on for the kids. I've done the spring pole lathe demo several years.

Since they do offer weekend and week long workshops they are going to try to get the adults interested by having short hands on projects that they can sign up for. They are doing a few this year in some of the mediums to try this out. I was asked if I thought I could do a 1 hour hands on in woodturning.

At first I thought there isn't any way but then when when I considered it more closely I think a small project and a scraper and any one, no matter how clutsy could probably do it. That's how I started. I made cabinet knobs with an electric drill clamped to my bench and sharpened screwdriver that I used as a scraper.

I'm headed over there in a few hours to check out what all is going on. Of course it's just a good excuse to ride the new bike as well. I'll check out what the other mediums are offering for their one hour class.

Re: 1 hour hands on demo

#15

Or I could do hands on chain saw carving

john lucas

Now you want liability issues. Imagine 10 beginners who have never held a saw swinging it around trying to carve a bear out of a tree.

How about free hand carving with the bandsaw like Sam Maloof did. That sounds like a good safe project.

How about Anvil launching? We could do that right in the middle of the parking lot and give extra prizes for the most expensive car it lands on.

There's just no end to fun you could have if you put your mind to it.

Re: 1 hour hands on demo

#16

George Taylor

Simple Christmas Ornament *LINK*

George Taylor

There are kits that use similar tubes as for pens with a press fit for top and bottom. Hut Products sell a kit of 4 with wood for $9. Straightforward rounding and spindle turning, friction polish, and a press fit. They go home with an ornament. Only issue would be to have enough pen turning mandrels.

I made these as I was learning.

George


http://www.hutproducts.com/prodinfo.asp?number=3700