My good friend Joe Looper passed away about 10 years ago. His wife Gail found a bunch of Joe's unfinished bowls and asked if I would finish them to give to his kids and grand kids. So now I have about 12 or so bowls that I have to figure out how to either mount on the lathe and finish or somehow finish sanding them off the lathe. some will be twice turned and easy to finish. A few can't be put back on the lathe.
this one was quite small and the warp was little enough that I re-turned the inside. I left the outside alone and just sanded it by hand. This one is about 5" across.
Glad to see you can get your mind off other things and back to turning. Not that you put yourself under any new pressure to salvage each piece for her family. Looks like a very good start. Very nice of you to do this, but I know you would never turn anyone down.
...and I took a class with Joe many years ago. Somewhere in my negatives I have shots of Joe and John Jordan both turning on the Loopty-de-Loop(sp?) monster lathe that Joe built, and have several times wondered what ever happened to that beauty of a lathe? I imagine it had to be disassembled to get it out of the room there at the craft school.
That's really neat John. What a great thing for you to do. I'm glad you left the shape Joe gave the bowl on the outside. Gail is so sweet, I'm glad to know her.
John, the name Joe Looper brings back memories from way back, he was at Appalachian Center for Crafts when I was there years ago. Nice guy! It's great that is wood is going to good use.
I met Joe more than 20 years ago. He and Gail were always the highlight of the trip whenever I taught at ACC. Gail is still a sweetheart of a friend. If you need any help finishing those bowls, just let me know.
I came to Tenn. Tech in 1987. I met Joe shortly after. He was a security guard at the Craft Center but also had a turning studio there. He always had a cigarette in his mouth, was always laughing, and always had a good story. He took this poor segmented dry wood turner and got me into green wood. He also invited me to joint the AAW and the TAW. Two organizations that turned my life around and gave me lots of friends.
Joe took a huge metal lathe and converted it to wood lathe. He called it the Loopty Loop. It had a 54" swing and enough power to turn 2 large vessels on each side of the headstock at the same time. I believe it had a 5hp DC motor. Unfortunately he passed away before he could convert his new bowl lathe. Another converted metal lathe, it had an 8 foot swing.
Joe had a wall full of tools about 7 or 8 feet long. His shop was a disaster. I was never in there when there was an aisle wider than 6" to walk, with screws, metal parts and machine parts laying everywhere. I had told him how my son wouldn't clean his room. I had my son with me when I visited Joe one time. Scott walked in and said man what a mess. Joe said, yea it all started when I wouldn't clean my room when I was a kid. It made for a good laugh.
We all miss him and turning these bowls is a pleasure. Joe was a good friend and Gail has been incredibly supportive of my work.