Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

So what did you...

Posts

So what did you...

#1

Keith Tompkins

So what did you...

keith tompkins

buy at Totally Turning? I bought a 8" Robust tool rest for my General...I polished up the bead along the top edge to a mirror finish and gave it a test. Very nice, indeed. I also picked up a Foredom 90 degree angle grinder, with accessories, for my flex-shaft carver...it's something I'll use constantly. Also, a chuckless 1/2 drill chuck that goes down to "0".A can of Bush oil, and a year's work of sandpaper.

Re: So what did you...

#2

Alan Zenreich

Re: So what did you...

Alan Zenreich

Keith,

Lauren requested an NSK Presto air turbine. Fortunately Ken Hertzog had them for sale (actually provided by Binh Pho) along with a regulator and set of bits. She's really anxious to try her hand at piercing.

I bought a couple of keyless Jacobs chucks, a digital caliper, an extra Bionic face shield (for away games), and some carborundum sanding pads.

We also picked up some striped ebony, gabon ebony, blackwood and padauk.

Finally a couple of "Carpe Lignum, Torne Lignum" shirts from Ruth Niles (a pen leaked in my last shirt).

Fun stuff.

Re: So what did you...

#3

Re: So what did you...

Stephen Mushinski

Ditto on the tool rests. I just had to buy 3 one for my large lathe, one for the small lathe and one for my delta lathe.

Re: So what did you...

#4

Re: So what did you...

Mike Foster

I bought a few burls and one of the air brushes that David Nittman sells. i have had limited success with the crummy one that I bought thinking that I just wouldn't use it that much. I also sat in on David's talk regarding color theory. David spent at least an hour with me giving me pointers on how to use it and take it apart and clean it. What a great guy. I have been playing with it and there is no comparison to what I had been using.

Re: So what did you...

#5

Rob Wallace

What brand is the air brush....

Rob Wallace

....you bought from David? Iwata?

Just curious - I have a Paasche that works OK most of the time, but I am by no means an expert to determine what is good and what isn't. It would be good to know what an expert recommends....

Rob Wallace

Re: So what did you...

#6

Steven Antonucci

Kevlar glove, thumb guard, and diamond hone

steven antonucci

I eyeballed a lot of pretty wood, but in the end, I am already sitting on a ton of pretty wood, so I decided that making the pile bigger wasn't something I was going to do.

I did win one of the raffles, but it was for something I couldn't use so I told them to draw another name.

Steve

Re: So what did you...

#7

Re: So what did you...

Matt Overton

I too got the Fordom angle grinder attatchment,as well as the tiny belt sander. I also got the one thing I went to find, something called the Gage'T, cant wait to try them out. Nice to see you again Kieth, and congratulations on your awards.

Re: So what did you...

#8

Me too!

Jennifer Indy.USA

Only I got the 6" Robust rest. I also bought one of Ruth's T-shirts. The new "Earth First" with the planet earth on the front....on the back it says "We'll log the other Planets later".

:)

Re: So what did you...

#9

Re: Me too!

Joe Herrmann

I did pretty good this year--I only bought a 3" x 3" x 20" piece of wood that the seller claims was grenandillo but I really think it's bubinga. Guess I'm saving for Provo and St. Paul.

Re: So what did you...

#10

Re: What brand is the air brush....

Mike Foster

David sells Grex airbrushes. He thinks they are just as good as the Iwata that Binh likes if you add an optional microcontrol air valve (which he also sells). The Grex has a couple little quirks and a couple advantages over the Iwata. Depends on what you want. It is also cheaper than the Iwata. David is top notch on customer service and will make it good for you if there is any problem at all. Check out his website and click on the "airbrush on wood" link.

http://www.davidnittmann.com/

Re: So what did you...

#11

Rob Wallace

Re: What brand is the air brush....

Rob Wallace

Thanks Mike!

I'll talk to David at the Symposium - another thing to look forward to in St. Paul this coming June!

Rob

Re: So what did you...

#12

Re: So what did you...

Don Orr

I also got a 6" Robust tool rest and the #2 MT drill chuck. I think the drill chuck was th deal of the show. I got a bunch of sandpaper, a Kevlar glove(thanks Steve A.) and a thread adapter for a Stronghold. The adapter I got from Lee Valley and it arrived already! Good old LV.

Like Christmas in March! :D

Re: So what did you...

#13

Re: What brand is the air brush....

John Scheideman

I bought a Grex recently and it seems like a good airbrush. I didn't know what to get and had never used an airbrush. After researching them it seemed like it compared favorably to the Iwata. I'm glad to hear that David recommends it!

Re: So what did you...

#14

Bill Blasic

Re: What brand is the air brush....

Bill Blasic

I like Don bought the #2 MT Drill Chuck, heavy duty buy!

Bill