Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

The Quest For THE STILL POINT

Posts

The Quest For THE STILL POINT

#1

The Quest For THE STILL POINT

charlie belden

The Quest For THE STILL POINT

Turning is a very dynamic thing. It begins with a STILL POINT � literally � a tree rooted in the ground � at a specific point on the surface of the earth. From that point on � until the turned piece is finished � everything is on the move � a chainsaw cutting the tree into manageable pieces, a blank chain sawn from a piece, the blank mounted on the lathe and spun up, perhaps the lathe vibrating due to the piece spinning off it�s center, a lathe tool rotating, twisting and tilting, the turner rocking and swaying, wood streaming off a cutting edge.

Turning is a VERY dynamic thing. But the underlying goal is, I think, to return the piece of wood we�re collaborating with, AND, ourselves � to � a STILL POINT. Everything is in harmonious balance - the size, the proportions, the profile, the grain orientation, the color � and � the turner � all come together � at THE STILL POINT.

It�s that fleeting moment I�m after � that STILL POINT � when everything is �just so� � �suchness� (google �Tathata�) � when all the thought and all the planning and all the lip biting turning is over � and the piece is parted off � DONE. This doesn�t happen very often. But every once in a while . . . everything happens the way it�s supposed to happen and �we� � all the players in this wonderful performance � all come together at THE STILL POINT.

Does any of this idea resonate with you?

Re: The Quest For THE STILL POINT

#2

Richard Allen

Re: The Quest For THE STILL POINT

Richard Allen

"Still Point"? are you kidding. You get a hunk of wood, make a bowl maybe eat some popcorn out of that bowl.

Or are you talking about Leibniz?

Re: The Quest For THE STILL POINT

#3

Re: The Quest For THE STILL POINT

charlie belden

Newton, Descarte and Spinoza I know of. Leibniz? Had to Wiki him. I wonder if the Big Hair bands of the late 80s modeled themselves - or at least their hairdos - on this guy. He was definitely a BIG HAIR Dude.

It's interesting that back then the "thinkers" of the time were not pidgeon holed into one are of interest and thought. You could be a philosopher AND a scientist AND a mathematician.

What I'm referring to is the following, found on Wiki

[ Tathata as a central concept of Buddhism expresses appreciation of the true nature of reality in any given moment. As no moment is exactly the same, each one can be savored for what occurs at that precise time, whether it is thought of as being "good" or "bad". ]

It's what sometimes happens - before the popcorn - that awareness of "suchness" which comes with The Still Point.

Oddly, though Christians want to let everyone know they are "Born Again" - to a Buddhist, having to be "Born Again" means "You didn't GET IT in your last life and are now forced to come back and try again." Different value systems, completely different connotations.

Re: The Quest For THE STILL POINT

#4

Richard Allen

Re: The Quest For THE STILL POINT

Richard Allen

Big thinkers have always embraced many different disciplines. Bertram Russell for example.

Re: The Quest For THE STILL POINT

#5

Your Quest

Mark Mandell - Gone Round In Jersey

Charlie,

You seem to be discussing the concept of centering. More than a little has been written about the concept , especially as applied to potters and the process of wheel-thrown ceramics. It is an occurrence, when artist and material find synergy and compromise. Your reference to "lip biting" indicates there is a fair amount of tension when you turn. My experience is that you'll only find that "center" when you relax. Far too many "makers" fight with their material, and because of that, they seldom "win" the contest.

Ellsworth speaks about the mystery of the interior in his blind hollow turning, and connecting with the form by using your entire body to move the tool. Potters use the very same concept, and when I was teaching it was the hardest thing for kids to achieve mostly because they were nervous about wrecking their pot or some other distraction.

Re: The Quest For THE STILL POINT

#6

All is dynamic

mjonesrdg

All that exists, exists in a dynamic state and all is cycling from one form to another and back again. Those Buddhists, in meditation, seek a "still point" in the mind, and some will spend a lifetime in the effort. It is said that, even approaching that fleeting moment when the mind is still, offers a profound sense of peace...of universal appreciation for the perfection of all that is...and of all encompassing love.

A a woodturner, I am satisfied with those spaces of time when my focus is intent upon that spinning piece of wood, the cutting edge at my command, and the "new" form that I create (hopefully) to be pleasing to both the eye and the hand. Spaces of time when there is a beneficial "forgetting"...forgetting of Nuclear meltdown, Libya, falling dollar, and all that exists outside my shop. I respect that it is not MY creation...but it is my recreation.

Re: The Quest For THE STILL POINT

#7

Re: Your Quest

charlie belden

Mark:

Maybe it's because I like to do Wild Hare Idea pieces, that I used "lip biting" as a descriptor of part of the process. When I'm trying something I've never tried before, and I try some things that seem crazy even to me, my body may be relaxed, no shoulders up around my ears, no white knuckle grip on the tool, no locked knees - but I sometimes bite my lip. Not hard, but hard enough to be aware of it.

Ellsworth seems to be a Zen Turner - everything "just so"

Re: The Quest For THE STILL POINT

#8

Steven Antonucci

Several points in my memory

steven antonucci

I recall (vividly) a bike ride way back in the day along a familiar route that I used to train on and one perfect day. Probably rode 20 mile in perfect union with the bike and when I came to a stop, it took me a minute to know where I was. I had spent an hour in a zen like state, whizzing through an everchanging scenery, barely aware of the world around me, but also at one with it.

Hard to do that as a turner (I think), because we have to chainsaw, sharpen, turn, finish, sand, etc... and the motions tend to not flow from one to the other without interruption. You might get brief moments of clarity, but your brain has to work to hard to stay in the zone. Cutting a single curve only takes a few seconds...

Steve

Re: The Quest For THE STILL POINT

#9

To re-arrange Gertrude......

Ron Bauman

is that when the "there" is there?

Re: The Quest For THE STILL POINT

#10

Re: The Quest For THE STILL POINT

Bob Macgregor

Hmmm. Charlie, aren't you the guy who is always dreaming up, and constructing pieces that move, jiggle, walk? It sounds to me like your imagination is working against you here.

BOB

Re: The Quest For THE STILL POINT

#11

Re: The Quest For THE STILL POINT

charlie belden

The STILL POINT can be taken literally - static - or in the case I was referring to, a point in time, when time and everything else stops - typically for just an instant - or, as in Steve's example, for several hours.

Even when doing dynamic / kinetic pieces, there are sometimes moments when the outcome is certain, before even beginning the piece. And it's not an ego thing - "I know and WILL make this happen" - but more of a "i have only a small role in what will be, a supporting role in a timeless play - and aware of that."

Re: The Quest For THE STILL POINT

#12

Re: Your Quest

Mike Rubes, Apex, NC

Hi Mark,

What you say makes perfect sense to me. I find that if I fight the piece, try to make it conform to my preconceived notions going in, it is not as much fun as when I just "let it go" and let the piece evolve naturally on the lathe.

Interesting thread.

Rainy day Wednesday Apex, NC