Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Micro mesh Pad order

Posts

Micro mesh Pad order

#1

Micro mesh  Pad order

Mark

I have a set of the micro-mesh pads for turning and lost the instructions. They are color coded--what order do I use the pads?

Thanks

mark

Re: Micro mesh Pad order

#2

Re: Micro mesh  Pad order

Ken Demarco


Hope that helps.

Ken DeMarco

Re: Micro mesh Pad order

#3

Jim in Burlington Ont.

Numbering

Jim in River Oaks, Ont.

Hi Mark,

I take a Sharpie and write the number on the pad referencing the sequence in which I use them in my process, that way I don't miss a pad, so #1, 2 , 3 etc.

Take care,

Jim

Re: Micro mesh Pad order

#4

Steve Kubien

Same here

Steve Kubien

I do as Jim...Sharpie to the rescue! Well, I used to. I haven't touched my micro mesh in, what, 6 months? 8? When I do pens (rare these days) I only go to 4000 grit via my Abralon pads. Can't remember the last time I used acrylic or other alternate material.

Re: Micro mesh Pad order

#5

Jim in Burlington Ont.

All sizes are not the same

Jim in River Oaks, Ont.

Hi Steve,

I almost never turn wood now in pen making, they don't sell in my focused market. Finish is critical on the materials I use and it took awhile to find what works best for me.

I also use a variety of commercial abrasives, but mostly graded P wet dry paper. I spoke with a custom car painter who told me that P grade was more consistent than CAMI grade paper, I listened, his wall of first place trophies spoke volumes and he knows his business.

I typically wet sand through 2500 P grade then buff, again I use a Sharpie to number my abrasive's not by grade number, but by sequence in my process.


Take care,

Jim

Re: Micro mesh Pad order

#6

Re: All sizes are not the same

Mark

Thanks everyone--the color code chart was what I needed. I will try to take a pic and post later.

Thanks

Again

Mark